Subtree merge tag 'v6.13-dts' of dts repo [1] into dts/upstream

[1] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git

[rockchip fixes from Jonas Karlman via IRC]

6 files changed, 170 insertions, 24 deletions

diff --git a/dts/upstream/Bindings/input/goodix,gt7986u-spifw.yaml b/dts/upstream/Bindings/input/goodix,gt7986u-spifw.yaml
new file mode 100644
index 00000000000..92bd0041feb
--- /dev/null
+++ b/dts/upstream/Bindings/input/goodix,gt7986u-spifw.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/goodix,gt7986u-spifw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Goodix GT7986U SPI HID Touchscreen
+
+maintainers:
+  - Charles Wang <[email protected]>
+
+description: |
+  Supports the Goodix GT7986U touchscreen.
+  This touch controller reports data packaged according to the HID protocol
+  over the SPI bus, but it is incompatible with Microsoft's HID-over-SPI protocol.
+
+  NOTE: these bindings are distinct from the bindings used with the
+  GT7986U when the chip is running I2C firmware. This is because there's
+  not a single device that talks over both I2C and SPI but rather
+  distinct touchscreens that happen to be built with the same ASIC but
+  that are distinct products running distinct firmware.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - goodix,gt7986u-spifw
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  spi-max-frequency: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touchscreen@0 {
+        compatible = "goodix,gt7986u-spifw";
+        reg = <0>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+        reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+        spi-max-frequency = <10000000>;
+      };
+    };
+
+...
diff --git a/dts/upstream/Bindings/input/mediatek,pmic-keys.yaml b/dts/upstream/Bindings/input/mediatek,pmic-keys.yaml
index 70567d92c74..60f09caa0e4 100644
--- a/dts/upstream/Bindings/input/mediatek,pmic-keys.yaml
+++ b/dts/upstream/Bindings/input/mediatek,pmic-keys.yaml
@@ -19,7 +19,7 @@ description: |
   by the PMIC that is defined as a Multi-Function Device (MFD).
 
   For MediaTek MT6323/MT6397 PMIC bindings see
-  Documentation/devicetree/bindings/mfd/mt6397.txt
+  Documentation/devicetree/bindings/mfd/mediatek,mt6397.yaml
 
 properties:
   compatible:
@@ -28,6 +28,7 @@ properties:
       - mediatek,mt6331-keys
       - mediatek,mt6357-keys
       - mediatek,mt6358-keys
+      - mediatek,mt6359-keys
       - mediatek,mt6397-keys
 
   power-off-time-sec: true
diff --git a/dts/upstream/Bindings/input/rotary-encoder.yaml b/dts/upstream/Bindings/input/rotary-encoder.yaml
index e315aab7f58..f9332bb2343 100644
--- a/dts/upstream/Bindings/input/rotary-encoder.yaml
+++ b/dts/upstream/Bindings/input/rotary-encoder.yaml
@@ -41,7 +41,7 @@ properties:
       device, hence no steps need to be passed.
 
   rotary-encoder,rollover:
-    $ref: /schemas/types.yaml#/definitions/int32
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Automatic rollover when the rotary value becomes
       greater than the specified steps or smaller than 0. For absolute axis only.
diff --git a/dts/upstream/Bindings/input/touchscreen/novatek,nvt-ts.yaml b/dts/upstream/Bindings/input/touchscreen/novatek,nvt-ts.yaml
new file mode 100644
index 00000000000..bd6a60486d1
--- /dev/null
+++ b/dts/upstream/Bindings/input/touchscreen/novatek,nvt-ts.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/novatek,nvt-ts.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NVT Touchscreen Controller
+
+maintainers:
+  - Hans de Goede <[email protected]>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - novatek,nt11205-ts
+      - novatek,nt36672a-ts
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vcc-supply: true
+  iovcc-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        touchscreen@1 {
+            compatible = "novatek,nt36672a-ts";
+            reg = <0x01>;
+            interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_RISING>;
+            reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+            vcc-supply = <&vreg_l22a_2p85>;
+            iovcc-supply = <&vreg_l14a_1p8>;
+            pinctrl-0 = <&ts_int_default &ts_reset_default>;
+            pinctrl-1 = <&ts_int_sleep &ts_reset_sleep>;
+            pinctrl-names = "default", "sleep";
+            touchscreen-size-x = <1080>;
+            touchscreen-size-y = <2246>;
+        };
+    };
+
+...
diff --git a/dts/upstream/Bindings/input/zii,rave-sp-pwrbutton.txt b/dts/upstream/Bindings/input/zii,rave-sp-pwrbutton.txt
deleted file mode 100644
index 43ef770dfeb..00000000000
--- a/dts/upstream/Bindings/input/zii,rave-sp-pwrbutton.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Zodiac Inflight Innovations RAVE Supervisory Processor Power Button Bindings
-
-RAVE SP input device is a "MFD cell" device corresponding to power
-button functionality of RAVE Supervisory Processor. It is expected
-that its Device Tree node is specified as a child of the node
-corresponding to the parent RAVE SP device (as documented in
-Documentation/devicetree/bindings/mfd/zii,rave-sp.txt)
-
-Required properties:
-
-- compatible: Should be "zii,rave-sp-pwrbutton"
-
-Example:
-
-	rave-sp {
-		compatible = "zii,rave-sp-rdu1";
-		current-speed = <38400>;
-
-		pwrbutton {
-			compatible = "zii,rave-sp-pwrbutton";
-		};
-	}
diff --git a/dts/upstream/Bindings/input/zii,rave-sp-pwrbutton.yaml b/dts/upstream/Bindings/input/zii,rave-sp-pwrbutton.yaml
new file mode 100644
index 00000000000..b26e6fe174f
--- /dev/null
+++ b/dts/upstream/Bindings/input/zii,rave-sp-pwrbutton.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/zii,rave-sp-pwrbutton.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zodiac Inflight Innovations RAVE Supervisory Processor Power Button
+
+maintainers:
+  - Frank Li <[email protected]>
+
+description:
+  RAVE SP input device is a "MFD cell" device corresponding to power
+  button functionality of RAVE Supervisory Processor. It is expected
+  that its Device Tree node is specified as a child of the node
+  corresponding to the parent RAVE SP device (as documented in
+  Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml)
+
+properties:
+  compatible:
+    const: zii,rave-sp-pwrbutton
+
+required:
+  - compatible
+
+allOf:
+  - $ref: input.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pwrbutton {
+        compatible = "zii,rave-sp-pwrbutton";
+    };
+