Subtree merge tag 'v7.0-dts' of dts repo [1] into dts/upstream

[1] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git

- Remove netc_timerX nodes from arch/arm/dts/imx943-u-boot.dtsi as they
  are now upstream
- Move dts/upstream/include/dt-bindings/reset/bcm6318-reset.h to
  include/dt-bindings/reset/bcm6318-reset.h as upstream has removed this
  file as unused (but we use it).

Signed-off-by: Tom Rini <[email protected]>

4 files changed, 411 insertions, 94 deletions

diff --git a/dts/upstream/src/arm/microchip/lan966x-pcb8385.dts b/dts/upstream/src/arm/microchip/lan966x-pcb8385.dts
new file mode 100644
index 00000000000..d18969275ef
--- /dev/null
+++ b/dts/upstream/src/arm/microchip/lan966x-pcb8385.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x-pcb8385.dts - Device Tree file for PCB8385
+ */
+/dts-v1/;
+
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	model = "Microchip EVB - LAN9668";
+	compatible = "microchip,lan9668-pcb8385", "microchip,lan9668", "microchip,lan966";
+
+	aliases {
+		serial0 = &usart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 59 GPIO_ACTIVE_LOW>;
+		open-source;
+		priority = <200>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-p1-green {
+			label = "cu0:green";
+			gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-p1-yellow {
+			label = "cu0:yellow";
+			gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-p2-green {
+			label = "cu1:green";
+			gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-p2-yellow {
+			label = "cu1:yellow";
+			gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&aes {
+	status = "reserved"; /* Reserved by secure OS */
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+};
+
+&gpio {
+	fc0_b_pins: fc0-b-pins {
+		/* SCL, SDA */
+		pins = "GPIO_25", "GPIO_26";
+		function = "fc0_b";
+	};
+
+	fc3_b_pins: fc3-b-pins {
+		/* RX, TX */
+		pins = "GPIO_52", "GPIO_53";
+		function = "fc3_b";
+	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1, LD */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+		function = "sgpio_a";
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&fc0_b_pins>;
+	pinctrl-names = "default";
+	dmas = <0>, <0>;
+	i2c-analog-filter;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	i2c-sda-hold-time-ns = <1500>;
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c01";
+		reg = <0x54>;
+	};
+
+	eeprom@55 {
+		compatible = "atmel,24c01";
+		reg = <0x55>;
+	};
+};
+
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>;
+	pinctrl-names = "default";
+	microchip,sgpio-port-ranges = <0 3>;
+	status = "okay";
+
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&usart3 {
+	pinctrl-0 = <&fc3_b_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm/microchip/sam9x7.dtsi b/dts/upstream/src/arm/microchip/sam9x7.dtsi
index 46dacbbd201..d242d7a934d 100644
--- a/dts/upstream/src/arm/microchip/sam9x7.dtsi
+++ b/dts/upstream/src/arm/microchip/sam9x7.dtsi
@@ -1226,7 +1226,7 @@
 				interrupt-controller;
 				#gpio-cells = <2>;
 				gpio-controller;
-				#gpio-lines = <26>;
+				#gpio-lines = <27>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 			};
 
diff --git a/dts/upstream/src/arm/microchip/sama7d65.dtsi b/dts/upstream/src/arm/microchip/sama7d65.dtsi
index 868045c650a..e21556f4638 100644
--- a/dts/upstream/src/arm/microchip/sama7d65.dtsi
+++ b/dts/upstream/src/arm/microchip/sama7d65.dtsi
@@ -414,10 +414,26 @@
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				atmel,fifo-size = <32>;
 				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				status = "disabled";
 			};
 
+			spi0: spi@400 {
+				compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(5)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
 			i2c0: i2c@600 {
 				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
@@ -442,6 +458,22 @@
 			#size-cells = <1>;
 			status = "disabled";
 
+			uart1: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+				clock-names = "usart";
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(7)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <32>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
 			spi1: spi@400 {
 				compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi";
 				reg = <0x400 0x200>;
@@ -492,9 +524,39 @@
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				atmel,fifo-size = <32>;
 				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				status = "disabled";
 			};
+
+			spi2: spi@400 {
+				compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(10)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(9)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(10)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(9)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
 		};
 
 		flx3: flexcom@e182c000 {
@@ -517,10 +579,26 @@
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				atmel,fifo-size = <32>;
 				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				status = "disabled";
 			};
 
+			spi3: spi@400 {
+				compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(11)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
 			i2c3: i2c@600 {
 				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
@@ -576,6 +654,20 @@
 				atmel,fifo-size = <32>;
 				status = "disabled";
 			};
+
+			i2c4: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(13)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
 		};
 
 		flx5: flexcom@e201c000 {
@@ -587,6 +679,37 @@
 			#size-cells = <1>;
 			status = "disabled";
 
+			uart5: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				clock-names = "usart";
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(16)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(15)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <32>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi5: spi@400 {
+				compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(16)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(15)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
 			i2c5: i2c@600 {
 				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
@@ -617,10 +740,44 @@
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
 				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(18)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(17)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
 				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				atmel,fifo-size = <32>;
 				status = "disabled";
 			};
+
+			spi6: spi@400 {
+				compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(18)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(17)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(18)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(17)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
 		};
 
 		flx7: flexcom@e2024000 {
@@ -647,6 +804,35 @@
 				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				status = "disabled";
 			};
+
+			spi7: spi@400 {
+				compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(19)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(19)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
 		};
 
 		flx8: flexcom@e281c000 {
@@ -658,6 +844,37 @@
 			#size-cells = <1>;
 			status = "disabled";
 
+			uart8: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+				clock-names = "usart";
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(21)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <32>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi8: spi@400 {
+				compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(21)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
 			i2c8: i2c@600 {
 				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
@@ -682,6 +899,37 @@
 			#size-cells = <1>;
 			status = "disabled";
 
+			uart9: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				clock-names = "usart";
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(23)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <32>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi9: spi@400 {
+				compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(23)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
 			i2c9: i2c@600 {
 				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
@@ -706,6 +954,37 @@
 			#size-cells = <1>;
 			status = "disabled";
 
+			uart10: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+				clock-names = "usart";
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(26)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(25)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <32>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi10: spi@400 {
+				compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(26)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(25)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
 			i2c10: i2c@600 {
 				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
diff --git a/dts/upstream/src/arm/microchip/usb_a9g20-dab-mmx.dtsi b/dts/upstream/src/arm/microchip/usb_a9g20-dab-mmx.dtsi
deleted file mode 100644
index 5b1d80c0ab2..00000000000
--- a/dts/upstream/src/arm/microchip/usb_a9g20-dab-mmx.dtsi
+++ /dev/null
@@ -1,93 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * calao-dab-mmx.dtsi - Device Tree Include file for Calao DAB-MMX Daughter Board
- *
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
- */
-
-/ {
-	ahb {
-		apb {
-			usart1: serial@fffb4000 {
-				status = "okay";
-			};
-
-			usart3: serial@fffd0000 {
-				status = "okay";
-			};
-		};
-	};
-
-	i2c-gpio@0 {
-		status = "okay";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user_led1 {
-			label = "user_led1";
-			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
-		};
-
-/*
-* led already used by mother board but active as high
-*		user_led2 {
-*			label = "user_led2";
-*			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
-*		};
-*/
-		user_led3 {
-			label = "user_led3";
-			gpios = <&pioB 22 GPIO_ACTIVE_LOW>;
-		};
-
-		user_led4 {
-			label = "user_led4";
-			gpios = <&pioB 23 GPIO_ACTIVE_LOW>;
-		};
-
-		red {
-			label = "red";
-			gpios = <&pioB 24 GPIO_ACTIVE_LOW>;
-		};
-
-		orange {
-			label = "orange";
-			gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
-		};
-
-		green {
-			label = "green";
-			gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button-user-pb1 {
-			label = "user_pb1";
-			gpios = <&pioB 25 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-		};
-
-		button-user-pb2 {
-			label = "user_pb2";
-			gpios = <&pioB 13 GPIO_ACTIVE_LOW>;
-			linux,code = <0x101>;
-		};
-
-		button-user-pb3 {
-			label = "user_pb3";
-			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
-			linux,code = <0x102>;
-		};
-
-		button-user-pb4 {
-			label = "user_pb4";
-			gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
-			linux,code = <0x103>;
-		};
-	};
-};