Merge branch 'master' of git://git.denx.de/u-boot-arm

Conflicts:

	cpu/arm920t/ep93xx/timer.c

Signed-off-by: Minkyu Kang <[email protected]>

24 files changed, 96 insertions, 301 deletions

diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h
index 119065671a1..addca2fe3a1 100644
--- a/include/configs/FPS850L.h
+++ b/include/configs/FPS850L.h
@@ -437,4 +437,9 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h
index 73bcccc2ecb..ec9000d9fc4 100644
--- a/include/configs/FPS860L.h
+++ b/include/configs/FPS860L.h
@@ -439,4 +439,9 @@
 
 #define CONFIG_SCC1_ENET
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/HMI10.h b/include/configs/HMI10.h
index 88e1946b786..2747d8cce82 100644
--- a/include/configs/HMI10.h
+++ b/include/configs/HMI10.h
@@ -496,4 +496,9 @@
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/NSCU.h b/include/configs/NSCU.h
index 5dd72ffaf4c..5724f45a8d3 100644
--- a/include/configs/NSCU.h
+++ b/include/configs/NSCU.h
@@ -487,4 +487,9 @@
 #define CONFIG_FEC_ENET
 /* #define CONFIG_ETHPRIME		"FEC ETHERNET" */
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index f4509bd090a..30a5a319bcc 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -400,10 +400,6 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-/* new uImage format support */
-#define CONFIG_FIT		1
-#define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
-
 /* I2C */
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
diff --git a/include/configs/SL8245.h b/include/configs/SL8245.h
deleted file mode 100644
index 876d8828a21..00000000000
--- a/include/configs/SL8245.h
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * (C) Copyright 2001 - 2003
- * Wolfgang Denk, DENX Software Engineering, [email protected].
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* ------------------------------------------------------------------------- */
-/*
- * Configuration settings for the SL8245 board.
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC824X		1
-#define CONFIG_MPC8245		1
-#define CONFIG_SL8245		1
-
-
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-#define CONFIG_BOOTDELAY	5
-
-#define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PCI
-
-
-/*
- * Miscellaneous configurable options
- */
-#undef CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-
-/* Print Buffer Size
- */
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS	32		/* Max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CONFIG_SYS_LOAD_ADDR	0x00400000	/* Default load address		*/
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-
-#define CONFIG_SYS_FLASH_BASE0_PRELIM	0xFF800000	/* FLASH bank on RCS#0 */
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_FLASH_BASE0_PRELIM
-#define CONFIG_SYS_FLASH_BANKS		{ CONFIG_SYS_FLASH_BASE0_PRELIM }
-
-#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
-
-#define CONFIG_SYS_EUMB_ADDR	    0xFC000000
-
-#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
-#define CONFIG_SYS_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
-
-#define CONFIG_SYS_MEMTEST_START   0x00004000	/* memtest works on		*/
-#define CONFIG_SYS_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
-
-	/* Maximum amount of RAM.
-	 */
-#define CONFIG_SYS_MAX_RAM_SIZE    0x10000000	/* 0 .. 256 MB of (S)DRAM */
-
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-#undef CONFIG_SYS_RAMBOOT
-#else
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_EUMB_ADDR + 0x4500)
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-
-#define CONFIG_SYS_GBL_DATA_SIZE      128
-#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
-#define CONFIG_SYS_INIT_RAM_END      0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- * For the detail description refer to the MPC8240 user's manual.
- */
-
-#define CONFIG_SYS_CLK_FREQ  66666666	/* external frequency to pll */
-#define CONFIG_SYS_HZ		     1000
-
-	/* Bit-field values for MCCR1.
-	 */
-#define CONFIG_SYS_ROMNAL	    0
-#define CONFIG_SYS_ROMFAL	    7
-#define CONFIG_SYS_BANK0_ROW       2
-
-	/* Bit-field values for MCCR2.
-	 */
-#define CONFIG_SYS_REFINT	    0x400	    /* Refresh interval	FIXME: was 0t430		*/
-
-	/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
-	 */
-#define CONFIG_SYS_BSTOPRE	    192
-
-	/* Bit-field values for MCCR3.
-	 */
-#define CONFIG_SYS_REFREC	    2	    /* Refresh to activate interval */
-
-	/* Bit-field values for MCCR4.
-	 */
-#define CONFIG_SYS_PRETOACT	    2	    /* Precharge to activate interval */
-#define CONFIG_SYS_ACTTOPRE	    5	    /* Activate to Precharge interval */
-#define CONFIG_SYS_ACTORW	    3       /* FIXME was 2 */
-#define CONFIG_SYS_SDMODE_CAS_LAT  3	    /* SDMODE CAS latancy */
-#define CONFIG_SYS_SDMODE_WRAP	    0	    /* SDMODE wrap type	*/
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-#define CONFIG_SYS_EXTROM	    1
-#define CONFIG_SYS_REGDIMM	    0
-
-#define CONFIG_SYS_ODCR		0xff	/* configures line driver impedances,	*/
-					/* see 8245 book for bit definitions	*/
-#define CONFIG_SYS_PGMAX		0x32	/* how long the 8245 retains the	*/
-					/* currently accessed page in memory	*/
-					/* see 8245 book for details		*/
-
-/* Memory bank settings.
- * Only bits 20-29 are actually used from these vales to set the
- * start/end addresses. The upper two bits will always be 0, and the lower
- * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
- * address. Refer to the MPC8240 book.
- */
-
-#define CONFIG_SYS_BANK0_START	    0x00000000
-#define CONFIG_SYS_BANK0_END	    (CONFIG_SYS_MAX_RAM_SIZE - 1)
-#define CONFIG_SYS_BANK0_ENABLE    1
-#define CONFIG_SYS_BANK1_START	    0x3ff00000
-#define CONFIG_SYS_BANK1_END	    0x3fffffff
-#define CONFIG_SYS_BANK1_ENABLE    0
-#define CONFIG_SYS_BANK2_START	    0x3ff00000
-#define CONFIG_SYS_BANK2_END	    0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE    0
-#define CONFIG_SYS_BANK3_START	    0x3ff00000
-#define CONFIG_SYS_BANK3_END	    0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE    0
-#define CONFIG_SYS_BANK4_START	    0x3ff00000
-#define CONFIG_SYS_BANK4_END	    0x3fffffff
-#define CONFIG_SYS_BANK4_ENABLE    0
-#define CONFIG_SYS_BANK5_START	    0x3ff00000
-#define CONFIG_SYS_BANK5_END	    0x3fffffff
-#define CONFIG_SYS_BANK5_ENABLE    0
-#define CONFIG_SYS_BANK6_START	    0x3ff00000
-#define CONFIG_SYS_BANK6_END	    0x3fffffff
-#define CONFIG_SYS_BANK6_ENABLE    0
-#define CONFIG_SYS_BANK7_START	    0x3ff00000
-#define CONFIG_SYS_BANK7_END	    0x3fffffff
-#define CONFIG_SYS_BANK7_ENABLE    0
-
-#define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U  (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L  CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U  CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L  CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U  CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L  CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U  CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	35	/* Max number of sectors per flash	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
-
-
-	/* Warining: environment is not EMBEDDED in the U-Boot code.
-	 * It's stored in flash separately.
-	 */
-#define CONFIG_ENV_IS_IN_FLASH	    1
-#define CONFIG_ENV_ADDR		0xFFFF0000
-#define CONFIG_ENV_SIZE		0x00010000 /* Size of the Environment		*/
-#define CONFIG_ENV_SECT_SIZE	0x00010000 /* Size of the Environment Sector	*/
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_PCI
-#define CONFIG_PCI_PNP
-#undef  CONFIG_PCI_SCAN_SHOW
-
-
-#define CONFIG_SK98
-#define CONFIG_NET_MULTI
-
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/SM850.h b/include/configs/SM850.h
index 7266f9add1d..56f03e2b88d 100644
--- a/include/configs/SM850.h
+++ b/include/configs/SM850.h
@@ -372,4 +372,9 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/TK885D.h b/include/configs/TK885D.h
index 1e6d9cebe07..0df1b6e0425 100644
--- a/include/configs/TK885D.h
+++ b/include/configs/TK885D.h
@@ -516,4 +516,9 @@
 #define CONFIG_NET_RETRY_COUNT	3
 #define CONFIG_ETHPRIME		"FEC ETHERNET"
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h
index 966beaea16e..372c76dcc88 100644
--- a/include/configs/TQM823L.h
+++ b/include/configs/TQM823L.h
@@ -490,4 +490,9 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h
index cfa693da18a..64c97071d62 100644
--- a/include/configs/TQM823M.h
+++ b/include/configs/TQM823M.h
@@ -486,4 +486,9 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h
index dc0498e7d1e..bf6ecce4701 100644
--- a/include/configs/TQM850L.h
+++ b/include/configs/TQM850L.h
@@ -475,4 +475,9 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h
index cdabc530852..74424527b85 100644
--- a/include/configs/TQM850M.h
+++ b/include/configs/TQM850M.h
@@ -475,4 +475,9 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h
index 1255928fb57..32a7e79a4bf 100644
--- a/include/configs/TQM855L.h
+++ b/include/configs/TQM855L.h
@@ -483,4 +483,9 @@
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME		"SCC ETHERNET"
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h
index 584d40be938..4f44be31bba 100644
--- a/include/configs/TQM855M.h
+++ b/include/configs/TQM855M.h
@@ -518,4 +518,9 @@
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME		"SCC ETHERNET"
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h
index a772a27bec2..e86fe5ef963 100644
--- a/include/configs/TQM860L.h
+++ b/include/configs/TQM860L.h
@@ -482,4 +482,9 @@
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME		"SCC ETHERNET"
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT       1
+#define CONFIG_OF_BOARD_SETUP  1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h
index 7c347861f0c..4fd873b1bda 100644
--- a/include/configs/TQM860M.h
+++ b/include/configs/TQM860M.h
@@ -486,4 +486,9 @@
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME		"SCC ETHERNET"
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h
index 75d2dacba61..0c966c9e0c1 100644
--- a/include/configs/TQM862L.h
+++ b/include/configs/TQM862L.h
@@ -488,4 +488,9 @@
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME		"SCC ETHERNET"
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h
index 0c7aacdce64..178e6e21379 100644
--- a/include/configs/TQM862M.h
+++ b/include/configs/TQM862M.h
@@ -489,4 +489,9 @@
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME		"SCC ETHERNET"
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h
index 071afd4f3fb..a65946deb2b 100644
--- a/include/configs/TQM866M.h
+++ b/include/configs/TQM866M.h
@@ -508,4 +508,9 @@
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME		"SCC ETHERNET"
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h
index d435819aaaa..0fc4b69acf3 100644
--- a/include/configs/TQM885D.h
+++ b/include/configs/TQM885D.h
@@ -508,4 +508,9 @@
 
 #define CONFIG_ETHPRIME		"SCC ETHERNET"
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h
index d9028fae3c5..d0cb1e1d603 100644
--- a/include/configs/ipek01.h
+++ b/include/configs/ipek01.h
@@ -267,8 +267,6 @@
 /* End of used area in DPRAM */
 #define CONFIG_SYS_INIT_RAM_END		MPC5XXX_SRAM_SIZE
 
-
-
 /* size in bytes reserved for initial data */
 #define CONFIG_SYS_GBL_DATA_SIZE	128
 
@@ -315,7 +313,6 @@
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
-
 #define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1...15 MB in DRAM */
 
diff --git a/include/configs/spear3xx.h b/include/configs/spear3xx.h
index 0248abadc9e..0248abadc9e 100755..100644
--- a/include/configs/spear3xx.h
+++ b/include/configs/spear3xx.h
diff --git a/include/configs/spear6xx.h b/include/configs/spear6xx.h
index 2ad5beb82c6..2ad5beb82c6 100755..100644
--- a/include/configs/spear6xx.h
+++ b/include/configs/spear6xx.h
diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h
index f7813a1ff67..7046e6739d6 100644
--- a/include/configs/virtlab2.h
+++ b/include/configs/virtlab2.h
@@ -491,4 +491,10 @@
 						OR_SCY_2_CLK)
 #define CONFIG_SYS_BR4_PRELIM ((CONFIG_SYS_PERIPHERAL_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
 #define PCMCIA_CTRL (CONFIG_SYS_PERIPHERAL_BASE + 0xB00)
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */