Merge tag 'xilinx-for-v2024.01-rc1-v2' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2024.01-rc1

clk:
- Dont return error when assigned-clocks is empty or missing

dm:
- Support reading a single indexed u64 value
- Add support for reading bootscript address/flash address from DT

cmd:
- Fix flash_is_unlocked API

fpga:
- Define fpga_load() for debug build

global:
- U-Boot project name cleanup (next2)

net:
- zynq_gem: Use generic_phy_valid() helper
- axienet: Convert to ofnode functions
- gmii2rgmii: Read bridge address from DT

pytest:
- skip tpm2_startup when env__tpm_device_test_skip=True

spi-nor:
- Add mx25u25635f support
- zynqmp_qspi: Tune cache behavior

trace:
- Fix flyrecord alignment issue

xilinx:
- Move scriptaddr to DT as bootscr-address
- Pick script_offset_f/script_size_f from DT as bootscr-flash-offset/size
- Do not generate distro boot variables if disabled

versal:
- Extend memory ranges to cover HBM
- Enable TPM, sha1sum and KASLRSEED
- Fix distroboot prioritization in connection to available devices
- Clean mini targets bootcommand
- Fix clock driver

versal-net:
- Enable TPM, sha1sum and KASLRSEED
- Fix distroboot prioritization in connection to available devices

zynqmp;
- Allow AES to run from SPL
- Enable CMD_KASLRSEED
- Add proper dependencies for USB and remove ZYNQMP_USB
- Fix user si570 default frequency for zcu* boards
- Cover SOM rev2 revision
- Various DT changes
- Add firmware and pinctrl support for tristate configuration
  (high impedance/output enable)
- Add output-enable pins to SOMs
- Fix distroboot prioritization in connection to available devices
- Read bootscript address/flash address from DT
- Fix pcap_prog address

4 files changed, 20 insertions, 7 deletions

diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h
index a403999977e..b634bb1ab70 100644
--- a/include/configs/xilinx_versal.h
+++ b/include/configs/xilinx_versal.h
@@ -40,10 +40,11 @@
 	"kernel_size_r=0x10000000\0" \
 	"kernel_comp_addr_r=0x30000000\0" \
 	"kernel_comp_size=0x3C00000\0" \
-	"scriptaddr=0x20000000\0" \
 	"ramdisk_addr_r=0x02100000\0" \
 	"script_size_f=0x80000\0"
 
+#if defined(CONFIG_DISTRO_DEFAULTS)
+
 #if defined(CONFIG_MMC_SDHCI_ZYNQ)
 # define BOOT_TARGET_DEVICES_MMC(func)	func(MMC, mmc, 0) func(MMC, mmc, 1)
 #else
@@ -125,6 +126,10 @@
 
 #include <config_distro_bootcmd.h>
 
+#else /* CONFIG_DISTRO_DEFAULTS */
+# define BOOTENV
+#endif /* CONFIG_DISTRO_DEFAULTS */
+
 /* Initial environment variables */
 #ifndef CFG_EXTRA_ENV_SETTINGS
 #define CFG_EXTRA_ENV_SETTINGS \
diff --git a/include/configs/xilinx_versal_net.h b/include/configs/xilinx_versal_net.h
index 613cce46f90..2b441da91a1 100644
--- a/include/configs/xilinx_versal_net.h
+++ b/include/configs/xilinx_versal_net.h
@@ -54,10 +54,11 @@
 	"kernel_size_r=0x10000000\0" \
 	"kernel_comp_addr_r=0x30000000\0" \
 	"kernel_comp_size=0x3C00000\0" \
-	"scriptaddr=0x20000000\0" \
 	"ramdisk_addr_r=0x02100000\0" \
 	"script_size_f=0x80000\0"
 
+#if defined(CONFIG_DISTRO_DEFAULTS)
+
 #if defined(CONFIG_MMC_SDHCI_ZYNQ)
 # define BOOT_TARGET_DEVICES_MMC(func)	func(MMC, mmc, 0) func(MMC, mmc, 1)
 #else
@@ -126,6 +127,10 @@
 
 #include <config_distro_bootcmd.h>
 
+#else /* CONFIG_DISTRO_DEFAULTS */
+# define BOOTENV
+#endif /* CONFIG_DISTRO_DEFAULTS */
+
 /* Initial environment variables */
 #ifndef CFG_EXTRA_ENV_SETTINGS
 #define CFG_EXTRA_ENV_SETTINGS \
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 74264b7bee8..5bc117e1900 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -29,7 +29,7 @@
 
 /* Miscellaneous configurable options */
 
-#if defined(CONFIG_ZYNQMP_USB)
+#if defined(CONFIG_USB_STORAGE)
 #define DFU_DEFAULT_POLL_TIMEOUT	300
 
 # define PARTS_DEFAULT \
@@ -57,13 +57,14 @@
 	"kernel_size_r=0x10000000\0" \
 	"kernel_comp_addr_r=0x30000000\0" \
 	"kernel_comp_size=0x3C00000\0" \
-	"scriptaddr=0x20000000\0" \
 	"ramdisk_addr_r=0x02100000\0" \
 	"script_size_f=0x80000\0" \
 	"stdin=serial\0" \
 	"stdout=serial,vidconsole\0" \
 	"stderr=serial,vidconsole\0" \
 
+#if defined(CONFIG_DISTRO_DEFAULTS)
+
 #if defined(CONFIG_MMC_SDHCI_ZYNQ)
 # define BOOT_TARGET_DEVICES_MMC(func)	func(MMC, mmc, 0) func(MMC, mmc, 1)
 #else
@@ -76,7 +77,7 @@
 # define BOOT_TARGET_DEVICES_SCSI(func)
 #endif
 
-#if defined(CONFIG_ZYNQMP_USB)
+#if defined(CONFIG_USB_STORAGE)
 # define BOOT_TARGET_DEVICES_USB(func)	func(USB, usb, 0) func(USB, usb, 1)
 #else
 # define BOOT_TARGET_DEVICES_USB(func)
@@ -175,6 +176,10 @@
 
 #include <config_distro_bootcmd.h>
 
+#else /* CONFIG_DISTRO_DEFAULTS */
+# define BOOTENV
+#endif /* CONFIG_DISTRO_DEFAULTS */
+
 /* Initial environment variables */
 #ifndef CFG_EXTRA_ENV_SETTINGS
 #define CFG_EXTRA_ENV_SETTINGS \
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index e372e903170..553bb1b45b6 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -172,12 +172,10 @@
 /* Default environment */
 #ifndef CFG_EXTRA_ENV_SETTINGS
 #define CFG_EXTRA_ENV_SETTINGS	\
-	"scriptaddr=0x20000\0"	\
 	"script_size_f=0x40000\0"	\
 	"fdt_addr_r=0x1f00000\0"        \
 	"pxefile_addr_r=0x2000000\0"    \
 	"kernel_addr_r=0x2000000\0"     \
-	"scriptaddr=0x3000000\0"        \
 	"ramdisk_addr_r=0x3100000\0"    \
 	BOOTENV
 #endif