mx6sabre: Move environment variables to .env files

Move the shared environment from CFG_EXTRA_ENV_SETTINGS in
mx6sabre_common.h to a common text environment fragment in
include/env/nxp/mx6sabre_common.env. The mx6sabresd and mx6sabreauto
board environments include this fragment and add their own console
setting, which is the only board specific difference between them. The
eMMC firmware update variables remain guarded by CONFIG_SUPPORT_EMMC_BOOT
inside the fragment. The now unused CONSOLE_DEV defines and the
linux/stringify.h include are dropped.

The generated default environment is unchanged for both boards. This was
verified by comparing the output of scripts/get_default_envs.sh before
and after the change, which produced identical results.

Signed-off-by: Aristo Chen <[email protected]>
Reviewed-by: Peng Fan <[email protected]>

1 files changed, 114 insertions, 0 deletions

diff --git a/include/env/nxp/mx6sabre_common.env b/include/env/nxp/mx6sabre_common.env
new file mode 100644
index 00000000000..5346cd4e953
--- /dev/null
+++ b/include/env/nxp/mx6sabre_common.env
@@ -0,0 +1,114 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+
+script=boot.scr
+image=zImage
+fdtfile=undefined
+fdt_addr=0x18000000
+boot_fdt=try
+ip_dyn=yes
+dfuspi=dfu 0 sf 0:0:10000000:0
+dfu_alt_info_spl=spl raw 0x400
+dfu_alt_info_img=u-boot raw 0x10000
+dfu_alt_info=spl raw 0x400
+initrd_high=0xffffffff
+splashimage=CONFIG_SYS_LOAD_ADDR
+mmcdev=CONFIG_ENV_MMC_DEVICE_INDEX
+mmcpart=1
+finduuid=part uuid mmc ${mmcdev}:2 uuid
+update_sd_firmware=if test ${ip_dyn} = yes; then
+		setenv get_cmd dhcp;
+	else
+		setenv get_cmd tftp;
+	fi;
+	if mmc dev ${mmcdev}; then
+		if ${get_cmd} ${update_sd_firmware_filename}; then
+			setexpr fw_sz ${filesize} / 0x200;
+			setexpr fw_sz ${fw_sz} + 1;
+			mmc write ${loadaddr} 0x2 ${fw_sz};
+		fi;
+	fi
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+emmcdev=2
+update_emmc_firmware=if test ${ip_dyn} = yes; then
+		setenv get_cmd dhcp;
+	else
+		setenv get_cmd tftp;
+	fi;
+	if ${get_cmd} ${update_sd_firmware_filename}; then
+		if mmc dev ${emmcdev} 1; then
+			setexpr fw_sz ${filesize} / 0x200;
+			setexpr fw_sz ${fw_sz} + 1;
+			mmc write ${loadaddr} 0x2 ${fw_sz};
+		fi;
+	fi
+#endif
+mmcargs=setenv bootargs console=${console},${baudrate} root=PARTUUID=${uuid} rootwait rw
+loadbootscript=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script} ||
+	load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${script};
+bootscript=echo Running bootscript from mmc ...; source
+loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image} ||
+	load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${image}
+loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile} ||
+	load mmc ${mmcdev}:${mmcpart} ${fdt_addr} boot/${fdtfile}
+mmcboot=echo Booting from mmc ...;
+	run finduuid;
+	run mmcargs;
+	if test ${boot_fdt} = yes || test ${boot_fdt} = try; then
+		if run loadfdt; then
+			bootz ${loadaddr} - ${fdt_addr};
+		else
+			if test ${boot_fdt} = try; then
+				bootz;
+			else
+				echo WARN: Cannot load the DT;
+			fi;
+		fi;
+	else
+		bootz;
+	fi;
+netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs
+	ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp
+netboot=echo Booting from net ...;
+	run netargs;
+	if test ${ip_dyn} = yes; then
+		setenv get_cmd dhcp;
+	else
+		setenv get_cmd tftp;
+	fi;
+	${get_cmd} ${image};
+	if test ${boot_fdt} = yes || test ${boot_fdt} = try; then
+		if ${get_cmd} ${fdt_addr} ${fdtfile}; then
+			bootz ${loadaddr} - ${fdt_addr};
+		else
+			if test ${boot_fdt} = try; then
+				bootz;
+			else
+				echo WARN: Cannot load the DT;
+			fi;
+		fi;
+	else
+		bootz;
+	fi;
+findfdt=if test $fdtfile = undefined; then
+		if test $board_name = SABREAUTO && test $board_rev = MX6QP; then
+			setenv fdtfile imx6qp-sabreauto.dtb;
+		fi;
+		if test $board_name = SABREAUTO && test $board_rev = MX6Q; then
+			setenv fdtfile imx6q-sabreauto.dtb;
+		fi;
+		if test $board_name = SABREAUTO && test $board_rev = MX6DL; then
+			setenv fdtfile imx6dl-sabreauto.dtb;
+		fi;
+		if test $board_name = SABRESD && test $board_rev = MX6QP; then
+			setenv fdtfile imx6qp-sabresd.dtb;
+		fi;
+		if test $board_name = SABRESD && test $board_rev = MX6Q; then
+			setenv fdtfile imx6q-sabresd.dtb;
+		fi;
+		if test $board_name = SABRESD && test $board_rev = MX6DL; then
+			setenv fdtfile imx6dl-sabresd.dtb;
+		fi;
+		if test $fdtfile = undefined; then
+			echo WARNING: Could not determine dtb to use;
+		fi;
+	fi;