Merge tag 'v2024.07-rc3' into next

Prepare v2024.07-rc3

1 files changed, 0 insertions, 122 deletions

diff --git a/include/env/adi/adi_boot.env b/include/env/adi/adi_boot.env
deleted file mode 100644
index d56b14f5172..00000000000
--- a/include/env/adi/adi_boot.env
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * A target board needs to set these variables for the commands below to work:
- *
- * - adi_stage2_offset, the location of stage2-boot.ldr on the SPI flash
- * - adi_image_offset, location of the fitImage on the SPI flash
- * - adi_rfs_offset, location of the RFS on the SPI flash
- * - loadaddr, where you want to load things
- * - jffs2file, name of the jffs2 file for update, ex adsp-sc5xx-tiny-adsp-sc573.jffs2
- */
-
-#ifdef CONFIG_SC59X_64
-#define EARLY_PRINTK earlycon=adi_uart,0x31003000
-#else
-#define EARLY_PRINTK earlyprintk=serial,uart0,CONFIG_BAUDRATE
-#endif
-
-/* Config options */
-imagefile=fitImage
-ethaddr=02:80:ad:20:31:e8
-eth1addr=02:80:ad:20:31:e9
-uart_console=CONFIG_UART_CONSOLE
-#ifdef CONFIG_SC59X_64
-fdt_high=0xffffffffffffffff
-initrd_high=0xffffffffffffffff
-#else
-fdt_high=0xffffffff
-initrd_high=0xffffffff
-#endif
-
-/* Helper routines */
-init_ethernet=mii info;
-	dhcp;
-	setenv serverip ${tftpserverip}
-
-/* Args for each boot mode */
-adi_bootargs=EARLY_PRINTK console=ttySC0,CONFIG_BAUDRATE vmalloc=512M
-ramargs=setenv bootargs ${adi_bootargs}
-
-addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:eth0:off
-
-/* Boot modes are selectable and should be defined in the board env before including */
-#if defined(USE_NFS)
-// rootpath is set by CONFIG_ROOTPATH
-nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}${rootpath},tcp,nfsvers=3 ${adi_bootargs}
-nfsboot=run init_ethernet;
-	tftp ${loadaddr} ${tftp_dir_prefix}${imagefile};
-	run nfsargs;
-	run addip;
-	bootm ${loadaddr}
-#endif
-
-#if defined(USE_MMC)
-mmcargs=setenv bootargs root=/dev/mmcblk0p1 rw rootfstype=ext4 rootwait ${adi_bootargs}
-mmcboot=mmc rescan;
-	ext4load mmc 0:1 ${loadaddr} /boot/${imagefile};
-	run mmcargs;
-	bootm ${loadaddr}
-#endif
-
-#if defined(USE_SPI) || defined(USE_OSPI)
-spiargs=setenv bootargs root=/dev/mtdblock4 rw rootfstype=jffs2 ${adi_bootargs}
-spiboot=run spiargs;
-	sf probe ${sfdev};
-	sf read ${loadaddr} ${adi_image_offset} ${imagesize};
-	bootm ${loadaddr}
-#endif
-
-#if defined(USE_OSPI)
-ospiboot=run spiboot
-#endif
-
-#if defined(USE_RAM)
-ramboot=run init_ethernet;
-	tftp ${loadaddr} ${tfpt_dir_prefix}${imagefile};
-	run ramargs;
-	bootm ${loadaddr}
-#endif
-
-/* Update commands */
-stage1file=stage1-boot.ldr
-stage2file=stage2-boot.ldr
-
-#if defined(USE_SPI) || defined(USE_OSPI)
-update_spi_uboot_stage1=tftp ${loadaddr} ${tftp_dir_prefix}${stage1file};
-	sf probe ${sfdev};
-	sf update ${loadaddr} 0x0 ${filesize}
-update_spi_uboot_stage2=tftp ${loadaddr} ${tftp_dir_prefix}${stage2file};
-	sf probe ${sfdev};
-	sf update ${loadaddr} ${adi_stage2_offset} ${filesize}
-update_spi_uboot=run update_spi_uboot_stage1;
-	run update_spi_uboot_stage2;
-update_spi_fit=tftp ${loadaddr} ${tftp_dir_prefix}${imagefile};
-	sf probe ${sfdev};
-	sf update ${loadaddr} ${adi_image_offset} ${filesize};
-	setenv imagesize ${filesize}
-update_spi_rfs=tftp ${loadaddr} ${tftp_dir_prefix}${jffs2file};
-	sf probe ${sfdev};
-	sf update ${loadaddr} ${adi_rfs_offset} ${filesize}
-
-start_update_spi=run init_ethernet;
-	run update_spi_uboot;
-	run update_spi_fit;
-	run update_spi_rfs;
-start_update_spi_uboot_only=run init_ethernet;
-	run update_spi_uboot;
-#endif
-
-#if defined(USE_SPI)
-update_spi=setenv sfdev CONFIG_SC_BOOT_SPI_BUS:CONFIG_SC_BOOT_SPI_SSEL;
-	setenv bootcmd run spiboot;
-	setenv argscmd spiargs;
-	run start_update_spi;
-	saveenv
-#endif
-
-#if defined(USE_OSPI)
-update_ospi=setenv sfdev CONFIG_SC_BOOT_OSPI_BUS:CONFIG_SC_BOOT_OSPI_SSEL;
-	setenv bootcmd run ospiboot;
-	setenv argscmd spiargs;
-	run start_update_spi;
-	saveenv
-#endif