board/km: move ls102xa boards to environment text files

Create a common.env which we can use later on also for other boards.

Signed-off-by: Holger Brunck <[email protected]>

2 files changed, 97 insertions, 0 deletions

diff --git a/include/environment/pg-wcom/common.env b/include/environment/pg-wcom/common.env
new file mode 100644
index 00000000000..4b660cebd67
--- /dev/null
+++ b/include/environment/pg-wcom/common.env
@@ -0,0 +1,68 @@
+
+#ifndef WCOM_UBI_PARTITION_APP
+/* one flash chip only called boot */
+# define WCOM_UBI_LINUX_MTD	ubi.mtd=ubi0
+ubiattach=ubi part ubi0
+#else /* WCOM_UBI_PARTITION_APP */
+/* two flash chips called boot and app */
+# define WCOM_UBI_LINUX_MTD	ubi.mtd=ubi0 ubi.mtd=ubi1
+ubiattach=if test ${boot_bank} -eq 0;
+          then;
+		ubi part ubi0;
+	  else;
+		ubi part ubi1;
+	  fi
+#endif /* WCOMC_UBI_PARTITION_APP */
+
+actual_bank=0
+
+add_default=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off:
+		console=ttyS0,${baudrate} mem=${kernelmem} init=${init}
+		phram.phram=phvar,${varaddr},CONFIG_KM_PHRAM
+		WCOM_UBI_LINUX_MTD
+
+addpanic=setenv bootargs ${bootargs} panic=1 panic_on_oops=1
+altbootcmd=run bootcmd
+backup_bank=0
+boot=bootm ${load_addr_r} - ${fdt_addr_r}
+
+bootcmd=km_checkbidhwk &&
+	setenv bootcmd 'if km_checktestboot;
+			then;
+				setenv boot_bank ${test_bank};
+			else;
+				setenv boot_bank ${actual_bank};
+			fi;
+			run ${subbootcmds}; reset' &&
+	setenv altbootcmd 'setenv boot_bank ${backup_bank};
+			   run ${subbootcmds};
+			   reset' &&
+	saveenv &&
+	saveenv &&
+	boot
+
+cramfsaddr=CONFIG_KM_CRAMFS_ADDR
+cramfsloadfdt=cramfsload ${fdt_addr_r} fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb
+cramfsloadkernel=cramfsload ${load_addr_r} ${uimage}
+
+develop=tftp ${load_addr_r} scripts/develop-${arch}.txt &&
+	env import -t ${load_addr_r} ${filesize} &&
+	run setup_debug_env
+
+env_version=1
+fdt_addr_r=CONFIG_KM_FDT_ADDR
+flashargs=setenv bootargs root=mtdblock:rootfs${boot_bank} rootfstype=squashfs ro
+init=/sbin/init-overlay.sh
+load=tftpboot ${load_addr_r} ${hostname}/u-boot.bin
+load_addr_r=CONFIG_KM_KERNEL_ADDR
+pnvramsize=CONFIG_KM_PNVRAM
+
+ramfs=tftp ${load_addr_r} scripts/ramfs-${arch}.txt &&
+      env import -t ${load_addr_r} ${filesize} &&
+      run setup_debug_env
+
+release=run newenv; reset
+subbootcmds=ubiattach ubicopy checkfdt cramfsloadfdt set_fdthigh
+                      cramfsloadkernel flashargs add_default addpanic boot
+testbootcmd=setenv boot_bank ${test_bank}; run ${subbootcmds}; reset
+ubicopy=ubi read ${cramfsaddr} bootfs${boot_bank}
diff --git a/include/environment/pg-wcom/ls102xa.env b/include/environment/pg-wcom/ls102xa.env
new file mode 100644
index 00000000000..5b5bda95e28
--- /dev/null
+++ b/include/environment/pg-wcom/ls102xa.env
@@ -0,0 +1,29 @@
+#define WCOM_UBI_PARTITION_APP
+
+#include <environment/pg-wcom/common.env>
+
+EEprom_ivm=pca9547:70:9
+boot=bootm $load_addr_r - $fdt_addr_r
+checkfdt=true
+cramfsloadfdt=cramfsload $fdt_addr_r fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb
+ethrotate=no
+hwconfig=devdis:esdhc,usb3,usb2,sata,sec,dcu,duart2,qspi,can1,can2_4,ftm2_8,i2c2_3,sai1_4,lpuart2_6,asrc,spdif,lpuart1,ftm1
+netdev=eth2
+
+newenv=protect off CONFIG_ENV_ADDR_REDUND +0x40000 &&
+       erase CONFIG_ENV_ADDR_REDUND +0x40000 &&
+       protect on CONFIG_ENV_ADDR_REDUND +0x40000
+
+set_fdthigh=true
+
+update=protect off CONFIG_SYS_MONITOR_BASE +${filesize} &&
+       erase CONFIG_SYS_MONITOR_BASE +${filesize} &&
+       cp.b ${load_addr_r} CONFIG_SYS_MONITOR_BASE ${filesize} &&
+       protect on CONFIG_SYS_MONITOR_BASE +${filesize}
+
+update-nor=protect off CONFIG_SYS_FLASH_BASE +${filesize} &&
+	   erase CONFIG_SYS_FLASH_BASE +${filesize} &&
+	   cp.b ${load_addr_r} CONFIG_SYS_FLASH_BASE ${filesize} &&
+	   protect on CONFIG_SYS_MONITOR_BASE +0x100000
+
+uimage=uImage