Merge git://git.denx.de/u-boot-x86

- Add support for sound.

Albeit the big changeset, changes are pretty limited to x86 only and a
few new sound drivers used by x86 so I think it would be good to have
this in the next release.

1 files changed, 103 insertions, 0 deletions

diff --git a/include/hda_codec.h b/include/hda_codec.h
new file mode 100644
index 00000000000..56de571f0f7
--- /dev/null
+++ b/include/hda_codec.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Support for Intel High-Definition Audio codec
+ *
+ * Copyright 2018 Google LLC
+ *
+ * Taken from coreboot file of the same name
+ */
+
+#ifndef __HDA_CODEC_H_
+#define __HDA_CODEC_H_
+
+struct hda_regs;
+
+/**
+ * struct hda_codec_priv - Private data required by the HDA codec
+ *
+ * @regs: HDA registers
+ * @beep_nid: Node ID of beep node (>0)
+ */
+struct hda_codec_priv {
+	struct hda_regs *regs;
+	uint beep_nid;
+};
+
+/**
+ *  hda_wait_for_ready() - Wait for the codec to indicate it is ready
+ *
+ * @regs: HDA registers
+ * @return 0 if OK -ETIMEDOUT if codec did not respond in time
+ */
+int hda_wait_for_ready(struct hda_regs *regs);
+
+/**
+ *  hda_wait_for_valid() - Wait for the codec to accept the last command
+ *
+ * @regs: HDA registers
+ * @return 0 if OK -ETIMEDOUT if codec did not respond in time
+ */
+int hda_wait_for_valid(struct hda_regs *regs);
+
+/**
+ * hda_codec_detect() - Detect which codecs are present
+ *
+ * @regs: HDA registers
+ * @return bit mask of active codecs (0 if none)
+ * @return 0 if OK, -ve on error
+ */
+int hda_codec_detect(struct hda_regs *regs);
+
+/**
+ * hda_codecs_init() - Init all codecs
+ *
+ * @dev: Sound device
+ * @regs: HDA registers
+ * @codec_mask: Mask of codecs to init (bits 3:0)
+ * @return 0 if OK, -ve on error
+ */
+int hda_codecs_init(struct udevice *dev, struct hda_regs *regs, u32 codec_mask);
+
+/**
+ * hda_codec_start_beep() - Start beeping
+ *
+ * This tells the sound hardware to start a beep. It will continue until stopped
+ * by sound_stop_beep().
+ *
+ * @dev: Sound device
+ * @frequency_hz: Beep frequency in hertz
+ * @return if OK, -ve on error
+ */
+int hda_codec_start_beep(struct udevice *dev, int frequency_hz);
+
+/**
+ * hda_codec_stop_beep() - Stop beeping
+ *
+ * This tells the sound hardware to stop a previously started beep.
+ *
+ * @dev: Sound device
+ * @return if OK, -ve on error
+ */
+int hda_codec_stop_beep(struct udevice *dev);
+
+/**
+ * hda_codec_init() - Set up the HDA codec base address
+ *
+ * This should be called at the start of the probe() method.
+ *
+ * @dev: Sound device
+ * @return 0 if OK, -ve on error
+ */
+int hda_codec_init(struct udevice *dev);
+
+/**
+ * hda_codec_finish_init() - Finish setting up the HDA codec base address
+ *
+ * This should be called at the end of the probe() method.
+ *
+ * @dev: Sound device
+ * @return 0 if OK, -ve on error
+ */
+int hda_codec_finish_init(struct udevice *dev);
+
+#endif /* __HDA_CODEC_H_ */