diff options
| author | Tom Rini <[email protected]> | 2022-12-07 18:08:01 -0500 |
|---|---|---|
| committer | Tom Rini <[email protected]> | 2022-12-07 18:08:01 -0500 |
| commit | 2b2e9127ccdacdd1170dfcd2a4f1794ff9446fb1 (patch) | |
| tree | c43505efa6b8a29f4382024c6ef606e9a9d34d94 /include | |
| parent | b071de98433c9bcc5a44e005a7c7b7cda1333bb9 (diff) | |
| parent | e524f3a449f58e2ef967fb9b64b01db3d099a27a (diff) | |
Merge branch '2022-12-07-Kconfig-migrations' into next
- Import another batch of Kconfig migrations and in this case, also
legacy code removal.
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/MPC837XERDB.h | 27 | ||||
| -rw-r--r-- | include/configs/MPC8548CDS.h | 27 | ||||
| -rw-r--r-- | include/configs/P1010RDB.h | 31 | ||||
| -rw-r--r-- | include/configs/ls1021aiot.h | 21 | ||||
| -rw-r--r-- | include/configs/ls1021aqds.h | 26 | ||||
| -rw-r--r-- | include/configs/p1_p2_rdb_pc.h | 21 | ||||
| -rw-r--r-- | include/configs/socrates.h | 16 | ||||
| -rw-r--r-- | include/dm/platform_data/net_ethoc.h | 4 | ||||
| -rw-r--r-- | include/net.h | 71 | ||||
| -rw-r--r-- | include/phy.h | 41 | ||||
| -rw-r--r-- | include/tsec.h | 60 | ||||
| -rw-r--r-- | include/usb.h | 15 | ||||
| -rw-r--r-- | include/usb_ether.h | 44 |
13 files changed, 1 insertions, 403 deletions
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 95a90199a42..f312ffb37e2 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -41,8 +41,6 @@ #ifdef CONFIG_VSC7385_ENET -#define CONFIG_TSEC2 - /* The flash address and size of the VSC7385 firmware image */ #define CONFIG_VSC7385_IMAGE 0xFE7FE000 #define CONFIG_VSC7385_IMAGE_SIZE 8192 @@ -178,31 +176,6 @@ #define CFG_SYS_PCIE2_MEM_PHYS 0xC8000000 #define CFG_SYS_PCIE2_IO_PHYS 0xD8000000 -/* - * TSEC - */ -#ifdef CONFIG_TSEC_ENET - -#define CONFIG_GMII /* MII PHY management */ - -#define CONFIG_TSEC1 - -#ifdef CONFIG_TSEC1 -#define CONFIG_TSEC1_NAME "TSEC0" -#define CFG_SYS_TSEC1_OFFSET 0x24000 -#define TSEC1_PHY_ADDR 2 -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC1_PHYIDX 0 -#endif - -#ifdef CONFIG_TSEC2 -#define CONFIG_TSEC2_NAME "TSEC1" -#define TSEC2_PHY_ADDR 0x1c -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_PHYIDX 0 -#endif -#endif - #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC_PIN_MUX #define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC83xx_ESDHC_ADDR diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 780ee5ae865..34b876f829e 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -283,33 +283,6 @@ #endif #define CFG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */ -#if defined(CONFIG_TSEC_ENET) - -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC0" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC1" -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "eTSEC2" -#define CONFIG_TSEC4 -#define CONFIG_TSEC4_NAME "eTSEC3" -#undef CONFIG_MPC85XX_FEC - -#define TSEC1_PHY_ADDR 0 -#define TSEC2_PHY_ADDR 1 -#define TSEC3_PHY_ADDR 2 -#define TSEC4_PHY_ADDR 3 - -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 -#define TSEC4_PHYIDX 0 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC2_FLAGS TSEC_GIGABIT -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#endif /* CONFIG_TSEC_ENET */ - /* * Miscellaneous configurable options */ diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index b1d6b15811d..4418d516956 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -349,37 +349,6 @@ extern unsigned long get_sdram_size(void); /* eSPI - Enhanced SPI */ #endif -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "eTSEC3" - -#define TSEC1_PHY_ADDR 1 -#define TSEC2_PHY_ADDR 0 -#define TSEC3_PHY_ADDR 2 - -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 - -/* TBI PHY configuration for SGMII mode */ -#define CONFIG_TSEC_TBICR_SETTINGS ( \ - TBICR_PHY_RESET \ - | TBICR_ANEG_ENABLE \ - | TBICR_FULL_DUPLEX \ - | TBICR_SPEED1_SET \ - ) - -#endif /* CONFIG_TSEC_ENET */ - #ifdef CONFIG_MMC #define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85xx_ESDHC_ADDR #endif diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 024a7185275..179c5128e3b 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -66,27 +66,6 @@ /* SPI */ -/* - * eTSEC - */ - -#ifdef CONFIG_TSEC_ENET -#define CONFIG_MII_DEFAULT_TSEC 1 -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" - -#define TSEC1_PHY_ADDR 1 -#define TSEC2_PHY_ADDR 3 - -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#endif - #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" #define CONFIG_PEN_ADDR_BIG_ENDIAN diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 5a91cc3efec..d6681e85987 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -247,32 +247,6 @@ * MMC */ -/* - * eTSEC - */ - -#ifdef CONFIG_TSEC_ENET -#define CONFIG_MII_DEFAULT_TSEC 3 -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "eTSEC3" - -#define TSEC1_PHY_ADDR 1 -#define TSEC2_PHY_ADDR 2 -#define TSEC3_PHY_ADDR 3 - -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 -#endif - #define CONFIG_PEN_ADDR_BIG_ENDIAN #define CONFIG_SMP_PEN_ADDR 0x01ee0200 diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 9738e9fa9cb..49c5aef3059 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -366,27 +366,6 @@ #endif #endif /* CONFIG_PCI */ -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_TSEC1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 -#define CONFIG_TSEC2_NAME "eTSEC2" -#define CONFIG_TSEC3 -#define CONFIG_TSEC3_NAME "eTSEC3" - -#define TSEC1_PHY_ADDR 2 -#define TSEC2_PHY_ADDR 0 -#define TSEC3_PHY_ADDR 1 - -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 -#endif /* CONFIG_TSEC_ENET */ - /* * Environment */ diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 95393d3ab25..2a076716023 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -111,22 +111,6 @@ #define CFG_SYS_PCI1_MEM_PHYS 0x80000000 #define CFG_SYS_PCI1_IO_PHYS 0xE2000000 -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "TSEC1" -#undef CONFIG_MPC85XX_FEC - -#define TSEC1_PHY_ADDR 0 -#define TSEC3_PHY_ADDR 1 - -#define TSEC1_PHYIDX 0 -#define TSEC3_PHYIDX 0 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC3_FLAGS TSEC_GIGABIT - -/* Options are: TSEC[0,1] */ - /* * Miscellaneous configurable options */ diff --git a/include/dm/platform_data/net_ethoc.h b/include/dm/platform_data/net_ethoc.h index 855e9999a0a..44547d14f53 100644 --- a/include/dm/platform_data/net_ethoc.h +++ b/include/dm/platform_data/net_ethoc.h @@ -8,13 +8,9 @@ #include <net.h> -#ifdef CONFIG_DM_ETH - struct ethoc_eth_pdata { struct eth_pdata eth_pdata; phys_addr_t packet_base; }; -#endif - #endif /* _ETHOC_H */ diff --git a/include/net.h b/include/net.h index 1a99009959d..ee08f3307ec 100644 --- a/include/net.h +++ b/include/net.h @@ -101,7 +101,6 @@ enum eth_state_t { ETH_STATE_ACTIVE }; -#ifdef CONFIG_DM_ETH /** * struct eth_pdata - Platform data for Ethernet MAC controllers * @@ -180,76 +179,6 @@ unsigned char *eth_get_ethaddr(void); /* get the current device MAC */ int eth_is_active(struct udevice *dev); /* Test device for active state */ int eth_init_state_only(void); /* Set active state */ void eth_halt_state_only(void); /* Set passive state */ -#endif - -#ifndef CONFIG_DM_ETH -struct eth_device { -#define ETH_NAME_LEN 20 - char name[ETH_NAME_LEN]; - unsigned char enetaddr[ARP_HLEN]; - phys_addr_t iobase; - int state; - - int (*init)(struct eth_device *eth, struct bd_info *bd); - int (*send)(struct eth_device *, void *packet, int length); - int (*recv)(struct eth_device *); - void (*halt)(struct eth_device *); - int (*mcast)(struct eth_device *, const u8 *enetaddr, int join); - int (*write_hwaddr)(struct eth_device *eth); - struct eth_device *next; - int index; - void *priv; -}; - -int eth_register(struct eth_device *dev);/* Register network device */ -int eth_unregister(struct eth_device *dev);/* Remove network device */ - -extern struct eth_device *eth_current; - -static __always_inline struct eth_device *eth_get_dev(void) -{ - return eth_current; -} -struct eth_device *eth_get_dev_by_name(const char *devname); -struct eth_device *eth_get_dev_by_index(int index); /* get dev @ index */ - -/* get the current device MAC */ -static inline unsigned char *eth_get_ethaddr(void) -{ - if (eth_current) - return eth_current->enetaddr; - return NULL; -} - -/* Used only when NetConsole is enabled */ -int eth_is_active(struct eth_device *dev); /* Test device for active state */ -/* Set active state */ -static __always_inline int eth_init_state_only(void) -{ - eth_get_dev()->state = ETH_STATE_ACTIVE; - - return 0; -} -/* Set passive state */ -static __always_inline void eth_halt_state_only(void) -{ - eth_get_dev()->state = ETH_STATE_PASSIVE; -} - -/* - * Set the hardware address for an ethernet interface based on 'eth%daddr' - * environment variable (or just 'ethaddr' if eth_number is 0). - * Args: - * base_name - base name for device (normally "eth") - * eth_number - value of %d (0 for first device of this type) - * Returns: - * 0 is success, non-zero is error status from driver. - */ -int eth_write_hwaddr(struct eth_device *dev, const char *base_name, - int eth_number); - -int usb_eth_initialize(struct bd_info *bi); -#endif int eth_initialize(void); /* Initialize network subsystem */ void eth_try_another(int first_restart); /* Change the device */ diff --git a/include/phy.h b/include/phy.h index ff69536fca7..87aa86c2e78 100644 --- a/include/phy.h +++ b/include/phy.h @@ -138,12 +138,8 @@ struct phy_device { struct phy_driver *drv; void *priv; -#ifdef CONFIG_DM_ETH struct udevice *dev; ofnode node; -#else - struct eth_device *dev; -#endif /* forced speed & duplex (no autoneg) * partner speed & duplex & pause (autoneg) @@ -233,8 +229,6 @@ static inline struct phy_device *fixed_phy_create(ofnode node) #endif -#ifdef CONFIG_DM_ETH - /** * phy_connect_dev() - Associates the given pair of PHY and Ethernet devices * @phydev: PHY device @@ -293,41 +287,6 @@ static inline ofnode phy_get_ofnode(struct phy_device *phydev) else return dev_ofnode(phydev->dev); } -#else - -/** - * phy_connect_dev() - Associates the given pair of PHY and Ethernet devices - * @phydev: PHY device - * @dev: Ethernet device - * @interface: type of MAC-PHY interface - */ -void phy_connect_dev(struct phy_device *phydev, struct eth_device *dev, - phy_interface_t interface); - -/** - * phy_connect() - Creates a PHY device for the Ethernet interface - * Creates a PHY device for the PHY at the given address, if one doesn't exist - * already, and associates it with the Ethernet device. - * The function may be called with addr <= 0, in this case addr value is ignored - * and the bus is scanned to detect a PHY. Scanning should only be used if only - * one PHY is expected to be present on the MDIO bus, otherwise it is undefined - * which PHY is returned. - * - * @bus: MII/MDIO bus that hosts the PHY - * @addr: PHY address on MDIO bus - * @dev: Ethernet device to associate to the PHY - * @interface: type of MAC-PHY interface - * @return: pointer to phy_device if a PHY is found, or NULL otherwise - */ -struct phy_device *phy_connect(struct mii_dev *bus, int addr, - struct eth_device *dev, - phy_interface_t interface); - -static inline ofnode phy_get_ofnode(struct phy_device *phydev) -{ - return ofnode_null(); -} -#endif int phy_read(struct phy_device *phydev, int devad, int regnum); int phy_write(struct phy_device *phydev, int devad, int regnum, u16 val); diff --git a/include/tsec.h b/include/tsec.h index de279b21171..153337837a9 100644 --- a/include/tsec.h +++ b/include/tsec.h @@ -19,56 +19,6 @@ #define TSEC_MDIO_REGS_OFFSET 0x520 -#ifndef CONFIG_DM_ETH - -#ifdef CONFIG_ARCH_LS1021A -#define TSEC_SIZE 0x40000 -#define TSEC_MDIO_OFFSET 0x40000 -#else -#define TSEC_SIZE 0x01000 -#define TSEC_MDIO_OFFSET 0x01000 -#endif - -#define CONFIG_SYS_MDIO_BASE_ADDR (MDIO_BASE_ADDR + TSEC_MDIO_REGS_OFFSET) - -#define TSEC_GET_REGS(num, offset) \ - (struct tsec __iomem *)\ - (TSEC_BASE_ADDR + (((num) - 1) * (offset))) - -#define TSEC_GET_REGS_BASE(num) \ - TSEC_GET_REGS((num), TSEC_SIZE) - -#define TSEC_GET_MDIO_REGS(num, offset) \ - (struct tsec_mii_mng __iomem *)\ - (CONFIG_SYS_MDIO_BASE_ADDR + ((num) - 1) * (offset)) - -#define TSEC_GET_MDIO_REGS_BASE(num) \ - TSEC_GET_MDIO_REGS((num), TSEC_MDIO_OFFSET) - -#define DEFAULT_MII_NAME "FSL_MDIO" - -#define STD_TSEC_INFO(num) \ -{ \ - .regs = TSEC_GET_REGS_BASE(num), \ - .miiregs_sgmii = TSEC_GET_MDIO_REGS_BASE(num), \ - .devname = CONFIG_TSEC##num##_NAME, \ - .phyaddr = TSEC##num##_PHY_ADDR, \ - .flags = TSEC##num##_FLAGS, \ - .mii_devname = DEFAULT_MII_NAME \ -} - -#define SET_STD_TSEC_INFO(x, num) \ -{ \ - x.regs = TSEC_GET_REGS_BASE(num); \ - x.miiregs_sgmii = TSEC_GET_MDIO_REGS_BASE(num); \ - x.devname = CONFIG_TSEC##num##_NAME; \ - x.phyaddr = TSEC##num##_PHY_ADDR; \ - x.flags = TSEC##num##_FLAGS;\ - x.mii_devname = DEFAULT_MII_NAME;\ -} - -#endif /* CONFIG_DM_ETH */ - #define MAC_ADDR_LEN 6 /* #define TSEC_TIMEOUT 1000000 */ @@ -414,11 +364,7 @@ struct tsec_private { u32 flags; uint rx_idx; /* index of the current RX buffer */ uint tx_idx; /* index of the current TX buffer */ -#ifndef CONFIG_DM_ETH - struct eth_device *dev; -#else struct udevice *dev; -#endif }; struct tsec_info_struct { @@ -431,10 +377,4 @@ struct tsec_info_struct { u32 flags; }; -#ifndef CONFIG_DM_ETH -int tsec_standard_init(struct bd_info *bis); -int tsec_eth_init(struct bd_info *bis, struct tsec_info_struct *tsec_info, - int num); -#endif - #endif /* __TSEC_H */ diff --git a/include/usb.h b/include/usb.h index 7e3796bd5ba..80cb8467203 100644 --- a/include/usb.h +++ b/include/usb.h @@ -809,21 +809,6 @@ struct dm_usb_ops { #define usb_get_emul_ops(dev) ((struct dm_usb_ops *)(dev)->driver->ops) /** - * usb_get_dev_index() - look up a device index number - * - * Look up devices using their index number (starting at 0). This works since - * in U-Boot device addresses are allocated starting at 1 with no gaps. - * - * TODO([email protected]): Remove this function when usb_ether.c is modified - * to work better with driver model. - * - * @bus: USB bus to check - * @index: Index number of device to find (0=first). This is just the - * device address less 1. - */ -struct usb_device *usb_get_dev_index(struct udevice *bus, int index); - -/** * usb_setup_device() - set up a device ready for use * * @dev: USB device pointer. This need not be a real device - it is diff --git a/include/usb_ether.h b/include/usb_ether.h index 8c7bd069064..18d7184711b 100644 --- a/include/usb_ether.h +++ b/include/usb_ether.h @@ -8,19 +8,13 @@ #include <net.h> -/* TODO([email protected]): Remove @pusb_dev when all boards use CONFIG_DM_ETH */ +/* TODO([email protected]): Remove @pusb_dev now that all boards use CONFIG_DM_ETH */ struct ueth_data { /* eth info */ -#ifdef CONFIG_DM_ETH uint8_t *rxbuf; int rxsize; int rxlen; /* Total bytes available in rxbuf */ int rxptr; /* Current position in rxbuf */ -#else - struct eth_device eth_dev; /* used with eth_register */ - /* driver private */ - void *dev_priv; -#endif int phy_id; /* mii phy id */ /* usb info */ @@ -34,7 +28,6 @@ struct ueth_data { unsigned char irqinterval; /* Intervall for IRQ Pipe */ }; -#ifdef CONFIG_DM_ETH /** * usb_ether_register() - register a new USB ethernet device * @@ -92,40 +85,5 @@ int usb_ether_get_rx_bytes(struct ueth_data *ueth, uint8_t **ptrp); * @num_bytes: Number of bytes to skip, or -1 to skip all bytes */ void usb_ether_advance_rxbuf(struct ueth_data *ueth, int num_bytes); -#else -/* - * Function definitions for each USB ethernet driver go here - * (declaration is unconditional, compilation is conditional) - */ -void asix_eth_before_probe(void); -int asix_eth_probe(struct usb_device *dev, unsigned int ifnum, - struct ueth_data *ss); -int asix_eth_get_info(struct usb_device *dev, struct ueth_data *ss, - struct eth_device *eth); - -void ax88179_eth_before_probe(void); -int ax88179_eth_probe(struct usb_device *dev, unsigned int ifnum, - struct ueth_data *ss); -int ax88179_eth_get_info(struct usb_device *dev, struct ueth_data *ss, - struct eth_device *eth); - -void mcs7830_eth_before_probe(void); -int mcs7830_eth_probe(struct usb_device *dev, unsigned int ifnum, - struct ueth_data *ss); -int mcs7830_eth_get_info(struct usb_device *dev, struct ueth_data *ss, - struct eth_device *eth); - -void smsc95xx_eth_before_probe(void); -int smsc95xx_eth_probe(struct usb_device *dev, unsigned int ifnum, - struct ueth_data *ss); -int smsc95xx_eth_get_info(struct usb_device *dev, struct ueth_data *ss, - struct eth_device *eth); - -void r8152_eth_before_probe(void); -int r8152_eth_probe(struct usb_device *dev, unsigned int ifnum, - struct ueth_data *ss); -int r8152_eth_get_info(struct usb_device *dev, struct ueth_data *ss, - struct eth_device *eth); -#endif #endif /* __USB_ETHER_H__ */ |
