diff options
| author | Svyatoslav Ryhel <[email protected]> | 2023-06-30 10:29:05 +0300 |
|---|---|---|
| committer | Thierry Reding <[email protected]> | 2023-06-30 15:20:37 +0200 |
| commit | 623a8c812e127c4f008dfbb60f29edc8c7d94e09 (patch) | |
| tree | 5fee7392377f7b9e1723cc9b0a936a024323cde8 /include | |
| parent | 855ffdfa650aa54edf2bfdd99da50cd6255453b8 (diff) | |
board: lg: x3: add Optimus 4X HD and Optimus Vu support
LG X3 is a development board based on Nvidia Tegra 3 SoC
on base of which Optimus 4X HD and Optimus Vu were created.
Both smartphones feature a 4.7" and 5" panels respectively,
an Nvidia Tegra 3 quad-core chip, 1 GB of RAM and 16/32 GB
of internal storage. Optimux 4X HD additionally has a micro
SD slot.
Tested-by: Andreas Westman Dorcsak <[email protected]> # LG P880 T30
Tested-by: Svyatoslav Ryhel <[email protected]> # LG P895 T30
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/x3-t30.h | 77 |
1 files changed, 77 insertions, 0 deletions
diff --git a/include/configs/x3-t30.h b/include/configs/x3-t30.h new file mode 100644 index 00000000000..d29ea700b2e --- /dev/null +++ b/include/configs/x3-t30.h @@ -0,0 +1,77 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * (C) Copyright 2010,2012 + * NVIDIA Corporation <www.nvidia.com> + * + * (C) Copyright 2022 + * Svyatoslav Ryhel <[email protected]> + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <linux/sizes.h> + +#include "tegra30-common.h" + +#define CFG_TEGRA_BOARD_STRING "LG X3 Board" + +#ifdef CONFIG_DEVICE_P880 +/* High-level configuration options */ +#undef CFG_TEGRA_BOARD_STRING +#define CFG_TEGRA_BOARD_STRING "LG Optimus 4X HD" +#endif + +#ifdef CONFIG_DEVICE_P895 +/* High-level configuration options */ +#undef CFG_TEGRA_BOARD_STRING +#define CFG_TEGRA_BOARD_STRING "LG Optimus Vu" +#endif + +#define X3_FLASH_UBOOT \ + "flash_uboot=echo Preparing RAM;" \ + "mw ${kernel_addr_r} 0 ${boot_block_size_r};" \ + "mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \ + "echo Reading BCT;" \ + "mmc dev 0 1;" \ + "mmc read ${kernel_addr_r} 0 ${boot_block_size};" \ + "echo Reading bootloader;" \ + "if load mmc 0:1 ${ramdisk_addr_r} ${bootloader_file};" \ + "then echo Calculating bootloader size;" \ + "size mmc 0:1 ${bootloader_file};" \ + "ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \ + "echo Writing bootloader to eMMC;" \ + "mmc dev 0 1;" \ + "mmc write ${kernel_addr_r} 0 ${boot_block_size};" \ + "mmc dev 0 2;" \ + "mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \ + "echo Bootloader written successfully;" \ + "pause 'Press ANY key to reboot device...'; reset;" \ + "else echo Reading bootloader failed;" \ + "pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0" + +#define X3_BOOTMENU \ + X3_FLASH_UBOOT \ + "bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \ + "bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu\0" \ + "bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \ + "bootmenu_3=update bootloader=run flash_uboot\0" \ + "bootmenu_4=reboot RCM=enterrcm\0" \ + "bootmenu_5=reboot=reset\0" \ + "bootmenu_6=power off=poweroff\0" \ + "bootmenu_delay=-1\0" + +#define BOARD_EXTRA_ENV_SETTINGS \ + "boot_block_size_r=0x200000\0" \ + "boot_block_size=0x1000\0" \ + "bootloader_file=u-boot-dtb-tegra.bin\0" \ + "check_button=gpio input 116; test $? -eq 0\0" \ + "partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \ + X3_BOOTMENU + +/* Board-specific serial config */ +#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE + +#include "tegra-common-post.h" + +#endif /* __CONFIG_H */ |