miiphy: define mii_devs with LIST_HEAD()

When enabling net console and console multiplexing, a boot crash was
observed using mtk_eth driver with stdin/stdout set to "serial,nc"
in persistent environment:

> CPU:   MediaTek MT7981
> Model: OpenWrt One
> DRAM:  1 GiB
> Core:  35 devices, 15 uclasses, devicetree: separate
> spi-nand: spi_nand spi_nand@0: Winbond SPI NAND was found.
> spi-nand: spi_nand spi_nand@0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
> Loading Environment from UBI... SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
> mtd: partition "ubi" extends beyond the end of device "spi-nand0" -- size truncated to 0x7f00000
> Read 126976 bytes from volume ubootenv to 000000007f7bf0c0
> Read 126976 bytes from volume ubootenv2 to 000000007f7de100
> OK
> "Synchronous Abort" handler, esr 0x96000004, far 0xeafffffeea000018
> elr: 0000000041e63cd4 lr : 0000000041e1b844 (reloc)
> elr: 000000007ff9ecd4 lr : 000000007ff56844
> x0 : eafffffeea000018 x1 : 000000007fb552e0
> x2 : 00000000000000fe x3 : 0000000000000000

The cause is that "serial,nc" forced the console subsystem to
initialize the ethernet driver before ethernet subsystem
initialization (console_init_r() is called before initr_net()).

During the mtk_eth driver initialization, mdio_register() will be
called, and miiphy_get_dev_by_name() will then be called.

The miiphy_get_dev_by_name() will check the list "mii_devs" to see
if the passed device name exists. However the mii_devs is defined
without initialization:
> static struct list_head mii_devs;
and the actual initialization is done in the following chain:
initr_net -> eth_initialize -> eth_common_init -> miiphy_init
Since initr_net() hasn't be called, iterating over the mii_devs
will access to physical address 0 (mii_devs.next == NULL) and will
cause the crash.

The fix is to define mii_devs using:
> static LIST_HEAD(mii_devs);

As the "current_mii" is defined as a static variable, it will
always be NULL in board_r stage and initializing it will NULL is
unnecessary. So the entire miiphy_init() can be remove.

Signed-off-by: Weijie Gao <[email protected]>

1 files changed, 0 insertions, 2 deletions

diff --git a/include/miiphy.h b/include/miiphy.h
index 1e6c7041fdc..63ec3bcc76b 100644
--- a/include/miiphy.h
+++ b/include/miiphy.h
@@ -33,8 +33,6 @@ int miiphy_is_1000base_x(const char *devname, unsigned char addr);
 int miiphy_link(const char *devname, unsigned char addr);
 #endif
 
-void miiphy_init(void);
-
 int miiphy_set_current_dev(const char *devname);
 const char *miiphy_get_current_dev(void);
 struct mii_dev *mdio_get_current_dev(void);