diff options
| author | Patrick Delaunay <[email protected]> | 2022-10-21 17:37:28 +0200 |
|---|---|---|
| committer | Patrice Chotard <[email protected]> | 2025-04-25 16:00:22 +0200 |
| commit | a7f00c8adaf3a8bc463ac55be4e4755f3b0ad4c9 (patch) | |
| tree | 1915179e01d3a972a5bf10247bc5e69efe771959 /include | |
| parent | 17f3cdd253a9c615d146b2f9378cc6c14ad19c84 (diff) | |
board: st: stm32mp2: change bootcmd for ST boards
For nor0 boot for the STMicroelectronics boards, the bootfs
is found in SD-Card = mmc0 for nor0 boot.
Introduce a new file configuration file stm32mp25_st_common.h
to manage this specific behavior for the STMicroelectronics
boards; change the boot order for nor0 boot and don't use
the default DISTRO order define in BOOT_TARGET_DEVICES:
mmc1, ubifs, mmc0, mmc2.
Signed-off-by: Patrick Delaunay <[email protected]>
Signed-off-by: Patrice CHOTARD <[email protected]>
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/stm32mp25_st_common.h | 51 |
1 files changed, 51 insertions, 0 deletions
diff --git a/include/configs/stm32mp25_st_common.h b/include/configs/stm32mp25_st_common.h new file mode 100644 index 00000000000..ab5a4a91644 --- /dev/null +++ b/include/configs/stm32mp25_st_common.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause */ +/* + * Copyright (C) 2022, STMicroelectronics - All Rights Reserved + * + * Configuration settings for the STMicroelectonics STM32MP25x boards + */ + +#ifndef __CONFIG_STM32MP25_ST_COMMON_H__ +#define __CONFIG_STM32MP25_ST_COMMON_H__ + +#define STM32MP_BOARD_EXTRA_ENV \ + "usb_pgood_delay=2000\0" \ + "console=ttySTM0\0" + +#include <configs/stm32mp25_common.h> + +#ifdef CFG_EXTRA_ENV_SETTINGS +/* + * default bootcmd for stm32mp25 STMicroelectronics boards: + * for serial/usb: execute the stm32prog command + * for mmc boot (eMMC, SD card), distro boot on the same mmc device + * for nand or spi-nand boot, distro boot with ubifs on UBI partition or + * sdcard + * for nor boot, distro boot on SD card = mmc0 ONLY ! + */ +#define ST_STM32MP25_BOOTCMD "bootcmd_stm32mp=" \ + "echo \"Boot over ${boot_device}${boot_instance}!\";" \ + "if test ${boot_device} = serial || test ${boot_device} = usb;" \ + "then stm32prog ${boot_device} ${boot_instance}; " \ + "else " \ + "run env_check;" \ + "if test ${boot_device} = mmc;" \ + "then env set boot_targets \"mmc${boot_instance}\"; fi;" \ + "if test ${boot_device} = nand ||" \ + " test ${boot_device} = spi-nand ;" \ + "then env set boot_targets ubifs0 mmc0; fi;" \ + "if test ${boot_device} = nor;" \ + "then env set boot_targets mmc0; fi;" \ + "run distro_bootcmd;" \ + "fi;\0" + +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ + STM32MP_MEM_LAYOUT \ + ST_STM32MP25_BOOTCMD \ + BOOTENV \ + STM32MP_EXTRA \ + STM32MP_BOARD_EXTRA_ENV + +#endif +#endif |