arm: Remove omap3_beagle board

This board has not been converted to CONFIG_DM_I2C by the deadline.
Remove it.

Acked-by: Robert Nelson <[email protected]>
Signed-off-by: Tom Rini <[email protected]>

1 files changed, 0 insertions, 197 deletions

diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
deleted file mode 100644
index b616dd2608c..00000000000
--- a/include/configs/omap3_beagle.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2006-2008
- * Texas Instruments.
- * Richard Woodruff <[email protected]>
- * Syed Mohammed Khasim <[email protected]>
- *
- * Configuration settings for the TI OMAP3530 Beagle board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <configs/ti_omap3_common.h>
-
-/*
- * We are only ever GP parts and will utilize all of the "downloaded image"
- * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
- */
-
-/* NAND */
-#if defined(CONFIG_MTD_RAW_NAND)
-#define CFG_SYS_FLASH_BASE		NAND_BASE
-#define CFG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
-                                         10, 11, 12, 13}
-#define CFG_SYS_NAND_ECCSIZE         512
-#define CFG_SYS_NAND_ECCBYTES        3
-/* NAND: SPL falcon mode configs */
-#endif /* CONFIG_MTD_RAW_NAND */
-
-/* DSS Support */
-
-/* TWL4030 LED Support */
-
-#define MEM_LAYOUT_ENV_SETTINGS \
-	DEFAULT_LINUX_BOOT_ENV
-
-#define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \
-	"bootcmd_" #devtypel #instance "=" \
-	"setenv mmcdev " #instance "; " \
-	"run mmcboot\0"
-#define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \
-	#devtypel #instance " "
-
-#if defined(CONFIG_MTD_RAW_NAND)
-
-#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
-	"bootcmd_" #devtypel #instance "=" \
-	"if test ${mtdids} = '' || test ${mtdparts} = '' ; then " \
-		"echo NAND boot disabled: No mtdids and/or mtdparts; " \
-	"else " \
-		"run nandboot; " \
-	"fi\0"
-#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
-	#devtypel #instance " "
-
-#define BOOT_TARGET_DEVICES(func) \
-	func(MMC, mmc, 0) \
-	func(LEGACY_MMC, legacy_mmc, 0) \
-	func(UBIFS, ubifs, 0, rootfs, rootfs) \
-	func(NAND, nand, 0)
-
-#else /* !CONFIG_MTD_RAW_NAND */
-
-#define BOOT_TARGET_DEVICES(func) \
-	func(MMC, mmc, 0) \
-	func(LEGACY_MMC, legacy_mmc, 0)
-
-#endif /* CONFIG_MTD_RAW_NAND */
-
-#include <config_distro_bootcmd.h>
-
-#define CFG_EXTRA_ENV_SETTINGS \
-	MEM_LAYOUT_ENV_SETTINGS \
-	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
-	"fdt_high=0xffffffff\0" \
-	"console=ttyO2,115200n8\0" \
-	"bootdir=/boot\0" \
-	"bootenv=uEnv.txt\0" \
-	"bootfile=zImage\0" \
-	"bootpart=0:2\0" \
-	"usbtty=cdc_acm\0" \
-	"mpurate=auto\0" \
-	"buddy=none\0" \
-	"camera=none\0" \
-	"vram=12M\0" \
-	"dvimode=640x480MR-16@60\0" \
-	"defaultdisplay=dvi\0" \
-	"defaultargs=setenv defargs " \
-		"mpurate=${mpurate} " \
-		"buddy=${buddy} "\
-		"camera=${camera} "\
-		"vram=${vram} " \
-		"omapfb.mode=dvi:${dvimode} " \
-		"omapdss.def_disp=${defaultdisplay}\0" \
-	"optargs=\0" \
-	"findfdt=" \
-		"if test $beaglerev = AxBx; then " \
-			"setenv fdtfile omap3-beagle.dtb; fi; " \
-		"if test $beaglerev = Cx; then " \
-			"setenv fdtfile omap3-beagle.dtb; fi; " \
-		"if test $beaglerev = C4; then " \
-			"setenv fdtfile omap3-beagle.dtb; fi; " \
-		"if test $beaglerev = xMAB; then " \
-			"setenv fdtfile omap3-beagle-xm-ab.dtb; fi; " \
-		"if test $beaglerev = xMC; then " \
-			"setenv fdtfile omap3-beagle-xm.dtb; fi; " \
-		"if test $fdtfile = undefined; then " \
-			"echo WARNING: Could not determine device tree to use; fi\0" \
-	"mmcdev=0\0" \
-	"mmcpart=2\0" \
-	"mmcroot=/dev/mmcblk0p2 rw\0" \
-	"mmcrootfstype=ext4 rootwait\0" \
-	"mmcargs=run defaultargs; setenv bootargs console=${console} " \
-		"${mtdparts} " \
-		"${defargs} " \
-		"${optargs} " \
-		"root=${mmcroot} " \
-		"rootfstype=${mmcrootfstype}\0" \
-	"userbutton_xm=gpio input 4;\0" \
-	"userbutton_nonxm=gpio input 7;\0" \
-	"userbutton=if gpio input 173; then " \
-			"run userbutton_xm; " \
-		"else " \
-			"run userbutton_nonxm; " \
-		"fi;\0" \
-	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-	"ext4bootenv=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootenv}\0" \
-	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
-		"env import -t ${loadaddr} ${filesize}\0" \
-	"mmcbootenv=setenv bootpart ${mmcdev}:${mmcpart}; " \
-		"mmc dev ${mmcdev}; " \
-		"if mmc rescan; then " \
-			"if run userbutton; then " \
-				"setenv bootenv uEnv.txt;" \
-			"else " \
-				"setenv bootenv user.txt;" \
-			"fi;" \
-			"run loadbootenv && run importbootenv; " \
-			"run ext4bootenv && run importbootenv; " \
-			"if test -n $uenvcmd; then " \
-				"echo Running uenvcmd ...; " \
-				"run uenvcmd; " \
-			"fi; " \
-		"fi\0" \
-	"validatefdt=" \
-		"if test $beaglerev = xMAB; then " \
-			"if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile}; then " \
-				"setenv fdtfile omap3-beagle-xm.dtb; " \
-			"fi; " \
-		"fi; \0" \
-	"loadimage=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-	"loaddtb=run validatefdt; ext4load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-	"mmcboot=run mmcbootenv; " \
-		"if run loadimage && run loaddtb; then " \
-			"echo Booting ${bootdir}/${bootfile} from mmc ${bootpart} ...; " \
-			"run mmcargs; " \
-			"if test ${bootfile} = uImage; then " \
-				"bootm ${loadaddr} - ${fdtaddr}; " \
-			"fi; " \
-			"if test ${bootfile} = zImage; then " \
-				"bootz ${loadaddr} - ${fdtaddr}; " \
-			"fi; " \
-		"fi\0" \
-	"nandroot=ubi0:rootfs ubi.mtd=rootfs rw\0" \
-	"nandrootfstype=ubifs rootwait\0" \
-	"nandargs=run defaultargs; setenv bootargs console=${console} " \
-		"${mtdparts} " \
-		"${defargs} " \
-		"${optargs} " \
-		"root=${nandroot} " \
-		"rootfstype=${nandrootfstype}\0" \
-	"nandboot=if nand read ${loadaddr} kernel && nand read ${fdtaddr} dtb; then " \
-			"echo Booting uImage from NAND MTD 'kernel' partition ...; " \
-			"run nandargs; " \
-			"bootm ${loadaddr} - ${fdtaddr}; " \
-		"fi\0" \
-	"loadramdisk=ext4load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \
-	"ramdisk=rootfs.ext2.gz.uboot\0" \
-	"ramdisk_size=16384\0" \
-	"ramroot=/dev/ram rw\0" \
-	"ramrootfstype=ext2\0" \
-	"ramargs=run defaultargs; setenv bootargs console=${console} " \
-		"${mtdparts} " \
-		"${defargs} " \
-		"${optargs} " \
-		"root=${ramroot} ramdisk_size=${ramdisk_size} " \
-		"rootfstype=${ramrootfstype}\0" \
-	"ramboot=run mmcbootenv; " \
-		"if run loadimage && run loaddtb && run loadramdisk; then " \
-			"echo Booting ${bootdir}/${bootfile} from mmc ${bootpart} w/ramdisk ...; " \
-			"run ramargs; " \
-			"bootz ${loadaddr} ${rdaddr} ${fdtaddr}; " \
-		"fi\0" \
-	BOOTENV
-
-#endif /* __CONFIG_H */