scripts: Rename Makefile.spl to Makefile.xpl

Rename this file to indicate that it refers to any non-U-Boot-proper
phase, not just SPL, which is the phase immediately before U-Boot
proper.

Signed-off-by: Simon Glass <[email protected]>

1 files changed, 0 insertions, 612 deletions

diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
deleted file mode 100644
index 1868f1beef6..00000000000
--- a/scripts/Makefile.spl
+++ /dev/null
@@ -1,612 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2011
-# Wolfgang Denk, DENX Software Engineering, [email protected].
-#
-# (C) Copyright 2011
-# Daniel Schwierzeck, [email protected].
-#
-# (C) Copyright 2011
-# Texas Instruments Incorporated - https://www.ti.com/
-# Aneesh V <[email protected]>
-# Based on top-level Makefile.
-#
-
-src := $(obj)
-
-# Create output directory if not already present
-_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
-
-include $(srctree)/scripts/Kbuild.include
-
--include include/config/auto.conf
--include $(obj)/include/autoconf.mk
-
-UBOOTINCLUDE := -I$(obj)/include $(UBOOTINCLUDE)
-
-KBUILD_CPPFLAGS += -DCONFIG_SPL_BUILD
-ifeq ($(CONFIG_TPL_BUILD),y)
-KBUILD_CPPFLAGS += -DCONFIG_TPL_BUILD
-else
-ifeq ($(CONFIG_VPL_BUILD),y)
-KBUILD_CPPFLAGS += -DCONFIG_VPL_BUILD
-endif
-endif
-
-ifeq ($(CONFIG_VPL_BUILD),y)
-SPL_BIN := u-boot-vpl
-SPL_NAME := vpl
-else
-ifeq ($(CONFIG_TPL_BUILD),y)
-SPL_BIN := u-boot-tpl
-SPL_NAME := tpl
-else
-SPL_BIN := u-boot-spl
-SPL_NAME := spl
-endif
-endif
-
-export SPL_NAME
-
-ifdef CONFIG_SPL_BUILD
-SPL_ := SPL_
-ifeq ($(CONFIG_VPL_BUILD),y)
-SPL_TPL_ := VPL_
-else
-ifeq ($(CONFIG_TPL_BUILD),y)
-SPL_TPL_ := TPL_
-else
-SPL_TPL_ := SPL_
-endif
-endif
-else
-SPL_ :=
-SPL_TPL_ :=
-endif
-
-ifeq ($(obj)$(CONFIG_SUPPORT_SPL),spl)
-$(error You cannot build SPL without enabling CONFIG_SUPPORT_SPL)
-endif
-ifeq ($(obj)$(CONFIG_SUPPORT_TPL),tpl)
-$(error You cannot build TPL without enabling CONFIG_SUPPORT_TPL)
-endif
-ifeq ($(obj)$(CONFIG_SUPPORT_VPL),vpl)
-$(error You cannot build VPL without enabling CONFIG_SUPPORT_VPL)
-endif
-
-include $(srctree)/config.mk
-include $(srctree)/arch/$(ARCH)/Makefile
-
-include $(srctree)/scripts/Makefile.lib
-
-# Enable garbage collection of un-used sections for SPL
-KBUILD_CFLAGS += -ffunction-sections -fdata-sections
-LDFLAGS_FINAL += --gc-sections
-
-ifeq ($(CONFIG_$(SPL_TPL_)STACKPROTECTOR),y)
-KBUILD_CFLAGS += -fstack-protector-strong
-else
-KBUILD_CFLAGS += -fno-stack-protector
-endif
-
-# FIX ME
-cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
-							$(NOSTDINC_FLAGS)
-c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
-
-HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
-
-libs-y += $(if $(wildcard $(srctree)/board/$(BOARDDIR)/Makefile),board/$(BOARDDIR)/)
-libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
-
-ifeq ($(CONFIG_TPL_BUILD),y)
-libs-$(CONFIG_TPL_FRAMEWORK) += common/spl/
-else
-libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
-endif
-libs-y += common/init/
-
-# Special handling for a few options which support SPL/TPL/VPL
-libs-$(CONFIG_$(SPL_TPL_)LIBCOMMON_SUPPORT) += boot/ common/ cmd/ env/
-libs-$(CONFIG_$(SPL_TPL_)LIBGENERIC_SUPPORT) += lib/
-ifdef CONFIG_SPL_FRAMEWORK
-libs-$(CONFIG_PARTITIONS) += disk/
-endif
-
-libs-y += drivers/
-libs-$(CONFIG_SPL_MEMORY) += drivers/memory/
-libs-$(CONFIG_SPL_USB_GADGET) += drivers/usb/dwc3/
-libs-$(CONFIG_SPL_USB_GADGET) += drivers/usb/cdns3/
-libs-y += dts/
-libs-y += fs/
-libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
-libs-$(CONFIG_SPL_NET) += net/
-libs-$(CONFIG_$(SPL_TPL_)UNIT_TEST) += test/
-
-head-y		:= $(addprefix $(obj)/,$(head-y))
-libs-y		:= $(addprefix $(obj)/,$(libs-y))
-u-boot-spl-dirs	:= $(patsubst %/,%,$(filter %/, $(libs-y)))
-
-libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
-
-# Add GCC lib
-ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
-PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
-PLATFORM_LIBS := $(filter-out %/lib.a, $(filter-out -lgcc, $(PLATFORM_LIBS))) $(PLATFORM_LIBGCC)
-endif
-
-u-boot-spl-init := $(head-y)
-u-boot-spl-main := $(libs-y)
-ifdef CONFIG_$(SPL_TPL_)OF_PLATDATA
-platdata-hdr := include/generated/dt-structs-gen.h include/generated/dt-decl.h
-platdata-inst := $(obj)/dts/dt-uclass.o $(obj)/dts/dt-device.o
-platdata-noinst := $(obj)/dts/dt-plat.o
-
-ifdef CONFIG_$(SPL_TPL_)OF_PLATDATA_INST
-u-boot-spl-platdata := $(platdata-inst)
-u-boot-spl-old-platdata := $(platdata-noinst)
-else
-u-boot-spl-platdata := $(platdata-noinst)
-u-boot-spl-old-platdata := $(platdata-inst)
-endif
-
-# Files we need to generate
-u-boot-spl-platdata_c := $(patsubst %.o,%.c,$(u-boot-spl-platdata))
-
-# Files we won't generate and should remove
-u-boot-spl-old-platdata_c := $(patsubst %.o,%.c,$(u-boot-spl-old-platdata))
-endif  # OF_PLATDATA
-
-# Linker Script
-# First test whether there's a linker-script for the specific stage defined...
-ifneq ($(CONFIG_$(SPL_TPL_)LDSCRIPT),)
-# need to strip off double quotes
-LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_$(SPL_TPL_)LDSCRIPT:"%"=%))
-else
-# ...then fall back to the generic SPL linker-script
-ifneq ($(CONFIG_SPL_LDSCRIPT),)
-# need to strip off double quotes
-LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_SPL_LDSCRIPT:"%"=%))
-endif
-endif
-
-ifeq ($(wildcard $(LDSCRIPT)),)
-	LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-spl.lds
-endif
-ifeq ($(wildcard $(LDSCRIPT)),)
-	LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot-spl.lds
-endif
-ifeq ($(wildcard $(LDSCRIPT)),)
-	LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot-spl.lds
-endif
-ifeq ($(wildcard $(LDSCRIPT)),)
-$(error could not find linker script)
-endif
-
-# Special flags for CPP when processing the linker script.
-# Pass the version down so we can handle backwards compatibility
-# on the fly.
-LDPPFLAGS += \
-	-include $(srctree)/include/u-boot/u-boot.lds.h \
-	-include $(objtree)/include/config.h \
-	-DCPUDIR=$(CPUDIR) \
-	$(shell $(LD) --version | \
-	  sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
-
-# Turn various CONFIG symbols into IMAGE symbols for easy reuse of
-# the scripts between SPL, TPL and VPL.
-ifneq ($(CONFIG_$(SPL_TPL_)MAX_SIZE),0x0)
-LDPPFLAGS += -DIMAGE_MAX_SIZE=$(CONFIG_$(SPL_TPL_)MAX_SIZE)
-endif
-ifneq ($(CONFIG_$(SPL_TPL_)TEXT_BASE),)
-LDPPFLAGS += -DIMAGE_TEXT_BASE=$(CONFIG_$(SPL_TPL_)TEXT_BASE)
-endif
-
-MKIMAGEOUTPUT ?= /dev/null
-
-quiet_cmd_mkimage = MKIMAGE $@
-cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
-	>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
-
-quiet_cmd_mkfitimage = MKIMAGE $@
-cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(SPL_ITS) -E $@ \
-	$(if $(KBUILD_VERBOSE:1=), MKIMAGEOUTPUT)
-
-MKIMAGEFLAGS_MLO = -T omapimage -a $(CONFIG_SPL_TEXT_BASE)
-
-MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE)
-
-MLO MLO.byteswap: $(obj)/u-boot-spl.bin FORCE
-	$(call if_changed,mkimage)
-
-ifeq ($(CONFIG_SYS_SOC),"at91")
-MKIMAGEFLAGS_boot.bin = -T atmelimage
-
-ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y)
-MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params)
-
-$(obj)/boot.bin: $(obj)/../tools/atmel_pmecc_params
-endif
-
-$(obj)/boot.bin: $(obj)/u-boot-spl.bin FORCE
-	$(call if_changed,mkimage)
-else
-ifdef CONFIG_ARCH_ZYNQ
-MKIMAGEFLAGS_boot.bin = -T zynqimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE)
-endif
-ifdef CONFIG_ARCH_ZYNQMP
-ifneq ($(CONFIG_PMUFW_INIT_FILE),"")
-spl/boot.bin: zynqmp-check-pmufw
-zynqmp-check-pmufw: FORCE
-	( cd $(srctree) && test -r $(CONFIG_PMUFW_INIT_FILE) ) \
-		|| ( echo "Cannot read $(CONFIG_PMUFW_INIT_FILE)" && false )
-endif
-MKIMAGEFLAGS_boot.bin = -T zynqmpimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE) \
-	-n "$(shell cd $(srctree); readlink -f $(CONFIG_PMUFW_INIT_FILE))"
-endif
-
-$(obj)/$(SPL_BIN)-align.bin: $(obj)/$(SPL_BIN).bin
-	@dd if=$< of=$@ conv=block,sync bs=4 2>/dev/null;
-
-spl/boot.bin: $(obj)/$(SPL_BIN)-align.bin FORCE
-	$(call if_changed,mkimage)
-endif
-
-INPUTS-y	+= $(obj)/$(SPL_BIN).bin $(obj)/$(SPL_BIN).sym
-
-ifneq ($(CONFIG_ARCH_EXYNOS)$(CONFIG_ARCH_S5PC1XX),)
-INPUTS-y	+= $(obj)/$(BOARD)-spl.bin
-endif
-
-ifneq ($(CONFIG_TARGET_SOCFPGA_GEN5)$(CONFIG_TARGET_SOCFPGA_ARRIA10),)
-INPUTS-y	+= $(obj)/$(SPL_BIN).sfp
-endif
-
-INPUTS-$(CONFIG_TARGET_SOCFPGA_SOC64) += $(obj)/u-boot-spl-dtb.hex
-
-ifdef CONFIG_ARCH_SUNXI
-INPUTS-y	+= $(obj)/sunxi-spl.bin
-
-ifdef CONFIG_NAND_SUNXI
-INPUTS-y	+= $(obj)/sunxi-spl-with-ecc.bin
-endif
-endif
-
-ifeq ($(CONFIG_SYS_SOC),"at91")
-INPUTS-y	+= $(obj)/boot.bin
-endif
-
-ifndef CONFIG_VPL_BUILD
-ifdef CONFIG_TPL_BUILD
-INPUTS-$(CONFIG_TPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-start16-tpl.bin \
-	$(obj)/u-boot-x86-reset16-tpl.bin
-else
-INPUTS-$(CONFIG_SPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-start16-spl.bin \
-	$(obj)/u-boot-x86-reset16-spl.bin
-endif
-endif
-
-INPUTS-$(CONFIG_ARCH_ZYNQ)		+= $(obj)/boot.bin
-INPUTS-$(CONFIG_ARCH_ZYNQMP)	+= $(obj)/boot.bin
-
-INPUTS-$(CONFIG_ARCH_MEDIATEK)	+= $(obj)/u-boot-spl-mtk.bin
-
-all:	$(INPUTS-y)
-
-quiet_cmd_cat = CAT     $@
-cmd_cat = cat $(filter-out $(PHONY), $^) > $@
-
-quiet_cmd_copy = COPY    $@
-      cmd_copy = cp $< $@
-
-ifneq ($(CONFIG_SPL_MULTI_DTB_FIT),y)
-FINAL_DTB_CONTAINER = $(obj)/$(SPL_BIN).dtb
-else ifeq ($(CONFIG_SPL_MULTI_DTB_FIT_LZO),y)
-FINAL_DTB_CONTAINER = $(obj)/$(SPL_BIN).multidtb.fit.lzo
-else ifeq ($(CONFIG_SPL_MULTI_DTB_FIT_GZIP),y)
-FINAL_DTB_CONTAINER = $(obj)/$(SPL_BIN).multidtb.fit.gz
-else
-FINAL_DTB_CONTAINER = $(obj)/$(SPL_BIN).multidtb.fit
-endif
-
-# Build the .dtb file if needed
-#   - OF_REAL is enabled
-#   - we have either OF_SEPARATE or OF_HOSTFILE
-build_dtb :=
-ifneq ($(CONFIG_$(SPL_TPL_)OF_REAL),)
-ifneq ($(CONFIG_OF_SEPARATE)$(CONFIG_SANDBOX),)
-build_dtb := y
-endif
-endif
-
-ifneq ($(build_dtb),)
-$(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN)-nodtb.bin \
-		$(if $(CONFIG_$(SPL_TPL_)SEPARATE_BSS),,$(obj)/$(SPL_BIN)-pad.bin) \
-		$(FINAL_DTB_CONTAINER)  FORCE
-	$(call if_changed,cat)
-
-$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN)-dtb.bin FORCE
-	$(call if_changed,copy)
-else
-$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN)-nodtb.bin FORCE
-	$(call if_changed,copy)
-endif
-
-# Create a file that pads from the end of u-boot-spl-nodtb.bin to bss_end
-$(obj)/$(SPL_BIN)-pad.bin: $(obj)/$(SPL_BIN)
-	@bss_size_str=$(shell $(NM) $< | awk 'BEGIN {size = 0} /__bss_size/ {size = $$1} END {print "ibase=16; " toupper(size)}' | bc); \
-	dd if=/dev/zero of=$@ bs=1 count=$${bss_size_str} 2>/dev/null;
-
-$(obj)/$(SPL_BIN).dtb: $(obj)/dts/dt-$(SPL_NAME).dtb FORCE
-	$(call if_changed,copy)
-
-pythonpath = PYTHONPATH=scripts/dtc/pylibfdt
-
-DTOC_ARGS := $(pythonpath) $(srctree)/tools/dtoc/dtoc \
-	-d $(obj)/$(SPL_BIN).dtb -p $(SPL_NAME)
-
-ifneq ($(CONFIG_$(SPL_TPL_)OF_PLATDATA_INST),)
-DTOC_ARGS += -i
-endif
-
-quiet_cmd_dtoc = DTOC    $@
-cmd_dtoc = $(DTOC_ARGS) -c $(obj)/dts -C include/generated all
-
-quiet_cmd_plat = PLAT    $@
-cmd_plat = $(CC) $(c_flags) -c $< -o $(filter-out $(PHONY),$@)
-
-$(obj)/dts/dt-%.o: $(obj)/dts/dt-%.c $(platdata-hdr)
-	$(call if_changed,plat)
-
-# Don't use dts_dir here, since it forces running this expensive rule every time
-$(platdata-hdr) $(u-boot-spl-platdata_c) &: $(obj)/$(SPL_BIN).dtb FORCE
-	@[ -d $(obj)/dts ] || mkdir -p $(obj)/dts
-	@# Remove old files since which ones we generate depends on the setting
-	@# of OF_PLATDATA_INST and this might change between builds. Leaving old
-	@# ones around is confusing and it is possible that switching the
-	@# setting again will use the old one instead of regenerating it.
-	@rm -f $(u-boot-spl-old-platdata_c) $(u-boot-spl-platdata_c) \
-		$(u-boot-spl-old-platdata)
-	$(call if_changed,dtoc)
-
-ifneq ($(CONFIG_ARCH_EXYNOS)$(CONFIG_ARCH_S5PC1XX),)
-ifeq ($(CONFIG_EXYNOS5420),y)
-VAR_SIZE_PARAM = --vs
-else
-VAR_SIZE_PARAM =
-endif
-$(obj)/$(BOARD)-spl.bin: $(obj)/u-boot-spl.bin
-	$(if $(wildcard $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl),\
-	$(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl,\
-	$(objtree)/tools/mkexynosspl) $(VAR_SIZE_PARAM) $< $@
-endif
-
-$(obj)/u-boot-spl.ldr: $(obj)/u-boot-spl
-	$(CREATE_LDR_ENV)
-	$(LDR) -T $(CONFIG_LDR_CPU) -c $@ $< $(LDR_FLAGS)
-	$(BOARD_SIZE_CHECK)
-
-quiet_cmd_objcopy = OBJCOPY $@
-cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
-
-OBJCOPYFLAGS_$(SPL_BIN)-nodtb.bin = $(SPL_OBJCFLAGS) -O binary \
-		$(if $(CONFIG_$(SPL_TPL_)X86_16BIT_INIT),-R .start16 -R .resetvec)
-
-$(obj)/$(SPL_BIN)-nodtb.bin: $(obj)/$(SPL_BIN) FORCE
-	$(call if_changed,objcopy)
-
-OBJCOPYFLAGS_u-boot-x86-start16-spl.bin := -O binary -j .start16
-$(obj)/u-boot-x86-start16-spl.bin: $(obj)/u-boot-spl FORCE
-	$(call if_changed,objcopy)
-
-OBJCOPYFLAGS_u-boot-x86-start16-tpl.bin := -O binary -j .start16
-$(obj)/u-boot-x86-start16-tpl.bin: $(obj)/u-boot-tpl FORCE
-	$(call if_changed,objcopy)
-
-OBJCOPYFLAGS_u-boot-x86-reset16-spl.bin := -O binary -j .resetvec
-$(obj)/u-boot-x86-reset16-spl.bin: $(obj)/u-boot-spl FORCE
-	$(call if_changed,objcopy)
-
-OBJCOPYFLAGS_u-boot-x86-reset16-tpl.bin := -O binary -j .resetvec
-$(obj)/u-boot-x86-reset16-tpl.bin: $(obj)/u-boot-tpl FORCE
-	$(call if_changed,objcopy)
-
-LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)
-
-# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
-LDFLAGS_$(SPL_BIN) += $(call ld-option, --no-dynamic-linker)
-
-LDFLAGS_$(SPL_BIN) += --build-id=none
-
-# Pick the best match (e.g. SPL_TEXT_BASE for SPL, TPL_TEXT_BASE for TPL)
-ifneq ($(CONFIG_$(SPL_TPL_)TEXT_BASE),)
-LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_$(SPL_TPL_)TEXT_BASE)
-endif
-
-ifdef CONFIG_TARGET_SOCFPGA_ARRIA10
-MKIMAGEFLAGS_$(SPL_BIN).sfp = -T socfpgaimage_v1
-else
-MKIMAGEFLAGS_$(SPL_BIN).sfp = -T socfpgaimage
-endif
-$(obj)/$(SPL_BIN).sfp: $(obj)/$(SPL_BIN).bin FORCE
-	$(call if_changed,mkimage)
-
-MKIMAGEFLAGS_sunxi-spl.bin = \
-	-A $(ARCH) \
-	-T $(CONFIG_SPL_IMAGE_TYPE) \
-	-a $(CONFIG_SPL_TEXT_BASE) \
-	-n $(CONFIG_DEFAULT_DEVICE_TREE)
-
-OBJCOPYFLAGS_u-boot-spl-dtb.hex := -I binary -O ihex --change-address=$(CONFIG_SPL_TEXT_BASE)
-
-$(obj)/u-boot-spl-dtb.hex: $(obj)/u-boot-spl-dtb.bin FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin FORCE
-	$(call if_changed,mkimage)
-
-quiet_cmd_sunxi_spl_image_builder = SUNXI_SPL_IMAGE_BUILDER $@
-cmd_sunxi_spl_image_builder = $(objtree)/tools/sunxi-spl-image-builder \
-				-c $(CONFIG_NAND_SUNXI_SPL_ECC_STRENGTH)/$(CONFIG_NAND_SUNXI_SPL_ECC_SIZE) \
-				-p $(CONFIG_SYS_NAND_PAGE_SIZE) \
-				-o $(CONFIG_SYS_NAND_OOBSIZE) \
-				-u $(CONFIG_NAND_SUNXI_SPL_USABLE_PAGE_SIZE) \
-				-e $(CONFIG_SYS_NAND_BLOCK_SIZE) \
-				-s -b $< $@
-$(obj)/sunxi-spl-with-ecc.bin: $(obj)/sunxi-spl.bin
-	$(call if_changed,sunxi_spl_image_builder)
-
-
-# MediaTek's specific SPL build
-MKIMAGEFLAGS_u-boot-spl-mtk.bin = -T mtk_image \
-	-a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) \
-	-n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
-
-$(obj)/u-boot-spl-mtk.bin: $(obj)/u-boot-spl.bin FORCE
-	$(call if_changed,mkimage)
-
-quiet_cmd_sym ?= SYM     $@
-      cmd_sym ?= $(OBJDUMP) -t $< > $@
-$(obj)/$(SPL_BIN).sym: $(obj)/$(SPL_BIN) FORCE
-	$(call if_changed,sym)
-
-# Generate linker list symbols references to force compiler to not optimize
-# them away when compiling with LTO
-ifdef CONFIG_LTO
-u-boot-spl-keep-syms-lto := $(obj)/keep-syms-lto.o
-u-boot-spl-keep-syms-lto_c := \
-	$(patsubst $(obj)/%.o,$(obj)/%.c,$(u-boot-spl-keep-syms-lto))
-
-quiet_cmd_keep_syms_lto = KSL     $@
-      cmd_keep_syms_lto = \
-	$(srctree)/scripts/gen_ll_addressable_symbols.sh $(NM) $^ > $@
-
-quiet_cmd_keep_syms_lto_cc = KSLCC   $@
-      cmd_keep_syms_lto_cc = \
-	$(CC) $(filter-out $(LTO_CFLAGS),$(c_flags)) -c -o $@ $<
-
-$(u-boot-spl-keep-syms-lto_c): $(u-boot-spl-main) $(u-boot-spl-platdata)
-	$(call if_changed,keep_syms_lto)
-$(u-boot-spl-keep-syms-lto): $(u-boot-spl-keep-syms-lto_c)
-	$(call if_changed,keep_syms_lto_cc)
-else
-u-boot-spl-keep-syms-lto :=
-endif
-
-# Rule to link u-boot-spl
-# May be overridden by arch/$(ARCH)/config.mk
-ifeq ($(LTO_ENABLE),y)
-quiet_cmd_u-boot-spl ?= LTO     $@
-      cmd_u-boot-spl ?= \
-	(									\
-		cd $(obj) &&							\
-		$(CC) -nostdlib -nostartfiles $(LTO_FINAL_LDFLAGS) $(c_flags)	\
-		$(KBUILD_LDFLAGS:%=-Wl,%) $(LDFLAGS_$(@F):%=-Wl,%)		\
-		$(patsubst $(obj)/%,%,$(u-boot-spl-init))			\
-		-Wl,--whole-archive						\
-			$(patsubst $(obj)/%,%,$(u-boot-spl-main))		\
-			$(patsubst $(obj)/%,%,$(u-boot-spl-platdata))		\
-			$(patsubst $(obj)/%,%,$(u-boot-spl-keep-syms-lto))	\
-			$(PLATFORM_LIBS)					\
-		-Wl,--no-whole-archive						\
-		-Wl,-Map,$(SPL_BIN).map -o $(SPL_BIN)				\
-	)
-else
-quiet_cmd_u-boot-spl ?= LD      $@
-      cmd_u-boot-spl ?= \
-	(								\
-		cd $(obj) &&						\
-		$(LD) $(KBUILD_LDFLAGS) $(LDFLAGS_$(@F))		\
-		$(patsubst $(obj)/%,%,$(u-boot-spl-init))		\
-		--whole-archive						\
-			$(patsubst $(obj)/%,%,$(u-boot-spl-main))	\
-			$(patsubst $(obj)/%,%,$(u-boot-spl-platdata))	\
-		--no-whole-archive					\
-		$(PLATFORM_LIBS) -Map $(SPL_BIN).map -o $(SPL_BIN)	\
-	)
-endif
-
-$(obj)/$(SPL_BIN): $(u-boot-spl-platdata) $(u-boot-spl-init) \
-		$(u-boot-spl-main) $(u-boot-spl-keep-syms-lto) \
-		$(obj)/u-boot-spl.lds FORCE
-	$(call if_changed,u-boot-spl)
-
-$(sort $(u-boot-spl-init) $(u-boot-spl-main)): $(u-boot-spl-dirs) ;
-
-PHONY += $(u-boot-spl-dirs)
-$(u-boot-spl-dirs): $(u-boot-spl-platdata) prepare
-	$(Q)$(MAKE) $(build)=$@
-
-PHONY += prepare
-prepare:
-	$(Q)$(MAKE) $(build)=$(obj)/.
-
-quiet_cmd_cpp_lds = LDS     $@
-cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
-		-D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
-
-$(obj)/u-boot-spl.lds: $(LDSCRIPT) FORCE
-	$(call if_changed_dep,cpp_lds)
-
-# read all saved command lines
-
-targets := $(wildcard $(sort $(targets)))
-cmd_files := $(wildcard $(obj)/.*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
-
-ifneq ($(cmd_files),)
-  $(cmd_files): ;	# Do not try to update included dependency files
-  include $(cmd_files)
-endif
-
-PHONY += FORCE
-FORCE:
-
-$(obj)/dts/dt-$(SPL_NAME).dtb: dts/dt.dtb
-	$(Q)$(MAKE) $(build)=$(obj)/dts spl_dtbs
-
-ifeq ($(CONFIG_OF_UPSTREAM),y)
-ifeq ($(CONFIG_ARM64),y)
-dt_dir := dts/upstream/src/arm64
-else
-dt_dir := dts/upstream/src/$(ARCH)
-endif
-else
-dt_dir := arch/$(ARCH)/dts
-endif
-
-# Declare the contents of the .PHONY variable as phony.  We keep that
-# information in a variable so we can use it in if_changed and friends.
-.PHONY: $(PHONY)
-
-SPL_OF_LIST_TARGETS = $(patsubst %,dts/%.dtb,$(subst ",,$(CONFIG_SPL_OF_LIST)))
-SHRUNK_ARCH_DTB = $(addprefix $(obj)/,$(SPL_OF_LIST_TARGETS))
-$(sort $(dir $(SHRUNK_ARCH_DTB))):
-	$(shell [ -d $@ ] || mkdir -p $@)
-
-.SECONDEXPANSION:
-$(SHRUNK_ARCH_DTB): $$(patsubst $(obj)/dts/%, $(dt_dir)/%, $$@) $(dir $(SHRUNK_ARCH_DTB))
-	$(call if_changed,fdtgrep)
-
-targets += $(SPL_OF_LIST_TARGETS)
-
-MKIMAGEFLAGS_$(SPL_BIN).multidtb.fit = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-	-n "Multi DTB fit image for $(SPL_BIN)" -E \
-	$(patsubst %,-b %,$(SHRUNK_ARCH_DTB))
-
-$(obj)/$(SPL_BIN).multidtb.fit: /dev/null $(SHRUNK_ARCH_DTB) FORCE
-	$(call if_changed,mkimage)
-ifneq ($(SOURCE_DATE_EPOCH),)
-	touch -d @$(SOURCE_DATE_EPOCH) $(obj)/$(SPL_BIN).multidtb.fit
-	chmod 0600 $(obj)/$(SPL_BIN).multidtb.fit
-endif
-
-$(obj)/$(SPL_BIN).multidtb.fit.gz: $(obj)/$(SPL_BIN).multidtb.fit
-	@gzip -kf9 $< > $@
-
-$(obj)/$(SPL_BIN).multidtb.fit.lzo: $(obj)/$(SPL_BIN).multidtb.fit
-	@lzop -f9 $< > $@
-
-ifdef CONFIG_ARCH_K3
-tispl.bin: $(obj)/u-boot-spl-nodtb.bin $(SHRUNK_ARCH_DTB) $(SPL_ITS) FORCE
-	$(call if_changed,mkfitimage)
-endif