diff options
| -rw-r--r-- | Kconfig | 1 | ||||
| -rw-r--r-- | boot/Kconfig | 2 | ||||
| -rw-r--r-- | cmd/Kconfig | 5 | ||||
| -rw-r--r-- | common/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/block/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/dfu/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/mtd/Kconfig | 1 | ||||
| -rw-r--r-- | dts/Kconfig | 3 | ||||
| -rw-r--r-- | lib/Kconfig | 1 |
10 files changed, 24 insertions, 0 deletions
@@ -720,6 +720,7 @@ config TPL_SYS_MONITOR_BASE config DYNAMIC_SYS_CLK_FREQ bool "Determine CPU clock frequency at run-time" + depends on !COMPILE_TEST help Implement a get_board_sys_clk function that will determine the CPU clock frequency at run time, rather than define it statically. diff --git a/boot/Kconfig b/boot/Kconfig index dd047365754..780889023e1 100644 --- a/boot/Kconfig +++ b/boot/Kconfig @@ -1852,6 +1852,7 @@ config OF_BOARD_SETUP config OF_BOARD_SETUP_EXTENDED bool "Set up latest board-specific details in device tree before boot" + depends on !COMPILE_TEST imply OF_BOARD_SETUP help This causes U-Boot to call ft_board_setup_ex() before booting into @@ -1862,6 +1863,7 @@ config OF_BOARD_SETUP_EXTENDED config OF_SYSTEM_SETUP bool "Set up system-specific details in device tree before boot" + depends on !COMPILE_TEST help This causes U-Boot to call ft_system_setup() before booting into the Operating System. This function can set up various diff --git a/cmd/Kconfig b/cmd/Kconfig index e0101ca6f82..9a901122e95 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1238,6 +1238,7 @@ config CMD_FPGAD config CMD_FUSE bool "fuse - support for the fuse subssystem" + depends on !COMPILE_TEST help (deprecated - needs conversion to driver model) This allows reading, sensing, programming or overriding fuses @@ -1289,6 +1290,7 @@ config CMD_GPT_RENAME config CMD_IDE bool "ide - Support for IDE drivers" + depends on !COMPILE_TEST select IDE help Provides an 'ide' command which allows accessing the IDE drive, @@ -1558,6 +1560,7 @@ config CMD_NVME config CMD_ONENAND bool "onenand - access to onenand device" depends on MTD + depends on !COMPILE_TEST help OneNAND is a brand of NAND ('Not AND' gate) flash which provides various useful features. This command allows reading, writing, @@ -1567,6 +1570,7 @@ config CMD_ONENAND config USE_ONENAND_BOARD_INIT bool "Call onenand_board_init() in the onenand command" depends on CMD_ONENAND + depends on !COMPILE_TEST config CMD_OSD bool "osd" @@ -2891,6 +2895,7 @@ config JFFS2_PART_SIZE config CMD_MTDPARTS bool "MTD partition support" + depends on !COMPILE_TEST depends on MTD select MTD_PARTITIONS help diff --git a/common/Kconfig b/common/Kconfig index 66dcc8cde15..1c340710a33 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -280,6 +280,7 @@ config SYS_CONSOLE_IS_IN_ENV config SYS_CONSOLE_OVERWRITE_ROUTINE bool "Allow board control over console overwriting" + depends on !COMPILE_TEST help If this is enabled, and the board-specific function overwrite_console() returns 1, the stdin, stderr and stdout are @@ -714,6 +715,7 @@ config ARCH_MISC_INIT config BOARD_EARLY_INIT_F bool "Call board-specific init before relocation" + depends on !COMPILE_TEST help Some boards need to perform initialisation as soon as possible after boot. With this option, U-Boot calls board_early_init_f() @@ -723,6 +725,7 @@ config BOARD_EARLY_INIT_F config BOARD_EARLY_INIT_R bool "Call board-specific init after relocation" + depends on !COMPILE_TEST help Some boards need to perform initialisation as directly after relocation. With this option, U-Boot calls board_early_init_r() @@ -730,6 +733,7 @@ config BOARD_EARLY_INIT_R config BOARD_INIT bool "Call board-specific init board_init() during init-calls" + depends on !COMPILE_TEST default y if ARM || RISCV || SANDBOX help Some boards need an board_init() function called during the initcall @@ -737,6 +741,7 @@ config BOARD_INIT config BOARD_POSTCLK_INIT bool "Call board_postclk_init" + depends on !COMPILE_TEST help Some boards need this to initialize select items, after clocks / timebase and before env / serial. @@ -780,6 +785,7 @@ config LAST_STAGE_INIT config MISC_INIT_R bool "Execute Misc Init" + depends on !COMPILE_TEST default y if ARCH_KEYSTONE || ARCH_SUNXI || MPC85xx default y if ARCH_OMAP2PLUS && !AM33XX help @@ -842,6 +848,7 @@ config SYS_EARLY_PCI_INIT config RESET_PHY_R bool "Reset ethernet PHY during init" + depends on !COMPILE_TEST help Implement reset_phy() in board code if required to reset the ethernet PHY. @@ -952,6 +959,7 @@ config TPL_STACKPROTECTOR config BOARD_RNG_SEED bool "Provide /chosen/rng-seed property to the linux kernel" + depends on !COMPILE_TEST help Selecting this option requires the board to define a board_rng_seed() function, which should return a buffer diff --git a/drivers/Kconfig b/drivers/Kconfig index 0b0c610e629..fe35e07b124 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -162,6 +162,7 @@ source "drivers/xen/Kconfig" config PHYS_TO_BUS bool "Custom physical to bus address mapping" + depends on !COMPILE_TEST help Some SoCs use a different address map for CPU physical addresses and peripheral DMA master accesses. If yours does, select this option in diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index c6c148ebd17..185da2b5cfc 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -137,6 +137,7 @@ endif # EFI_MEDIA config IDE bool "Support IDE controllers" + depends on !COMPILE_TEST select BLK help Enables support for IDE (Integrated Drive Electronics) hard drives. diff --git a/drivers/dfu/Kconfig b/drivers/dfu/Kconfig index e33b0056d0b..2cf4289b448 100644 --- a/drivers/dfu/Kconfig +++ b/drivers/dfu/Kconfig @@ -98,6 +98,7 @@ config DFU_SCSI config SET_DFU_ALT_INFO bool "Dynamic set of DFU alternate information" + depends on !COMPILE_TEST help This option allows to call the function set_dfu_alt_info to dynamically build dfu_alt_info in board. diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index e76601a5545..4afe769ef32 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -41,6 +41,7 @@ config MTD_BLOCK config SYS_MTDPARTS_RUNTIME bool "Allow MTDPARTS to be configured at runtime" + depends on !COMPILE_TEST help This option allows to call the function board_mtdparts_default to dynamically build the variables mtdids and mtdparts at runtime. diff --git a/dts/Kconfig b/dts/Kconfig index 6a5141b56e9..c8bc5232f9b 100644 --- a/dts/Kconfig +++ b/dts/Kconfig @@ -37,6 +37,7 @@ config OF_REAL config OF_BOARD_FIXUP bool "Board-specific manipulation of Device Tree" + depends on !COMPILE_TEST help In certain circumstances it is necessary to be able to modify U-Boot's device tree (e.g. to delete device from it). This option @@ -87,6 +88,7 @@ config OF_LIVE config OF_UPSTREAM bool "Enable use of devicetree imported from Linux kernel release" + depends on !COMPILE_TEST help Traditionally, U-Boot platforms used to have their custom devicetree files or copy devicetree files from Linux kernel which are hard to @@ -306,6 +308,7 @@ config MULTI_DTB_FIT_USER_DEF_ADDR config DTB_RESELECT bool "Support swapping dtbs at a later point in boot" + depends on !COMPILE_TEST depends on MULTI_DTB_FIT help It is possible during initial boot you may need to use a generic diff --git a/lib/Kconfig b/lib/Kconfig index fbc9de90669..7e48b179f6d 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -1244,6 +1244,7 @@ config SPL_LMB config LMB_ARCH_MEM_MAP bool "Add an architecture specific memory map" depends on LMB + depends on !COMPILE_TEST default y if FSL_LAYERSCAPE || X86 help Some architectures have special or unique aspects which need |