diff options
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 6 | ||||
| -rw-r--r-- | board/nxp/lx2160a/lx2160a.c | 18 | ||||
| -rw-r--r-- | include/configs/lx2160a_common.h | 4 |
3 files changed, 20 insertions, 8 deletions
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index 7f0cb28f52d..a047494b1fd 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -1143,7 +1143,7 @@ int arch_early_init_r(void) #ifdef CONFIG_SYS_HAS_SERDES fsl_serdes_init(); #endif -#ifdef CONFIG_SYS_FSL_HAS_RGMII +#if defined(CONFIG_SYS_FSL_HAS_RGMII) && defined(CONFIG_FSL_MC_ENET) /* some dpmacs in armv8a based freescale layerscape SOCs can be * configured via both serdes(sgmii, 10gbase-r, xlaui etc) bits and via * EC*_PMUX(rgmii) bits in RCW. @@ -1158,6 +1158,10 @@ int arch_early_init_r(void) * function of SOC, the dpmac will be enabled as RGMII even if it was * also enabled before as SGMII. If ECx_PMUX is not configured for * RGMII, DPMAC will remain configured as SGMII from fsl_serdes_init(). + * + * fsl_rgmii_init() itself is only built under CONFIG_FSL_MC_ENET + * (drivers/net/ldpaa_eth/); gate the call the same way so builds + * without MC-ENET still link. */ fsl_rgmii_init(); #endif diff --git a/board/nxp/lx2160a/lx2160a.c b/board/nxp/lx2160a/lx2160a.c index d34865de8c2..b7a6ccf46aa 100644 --- a/board/nxp/lx2160a/lx2160a.c +++ b/board/nxp/lx2160a/lx2160a.c @@ -242,13 +242,17 @@ int init_func_vid(void) return 0; } -#endif EVENT_SPY_SIMPLE(EVT_MISC_INIT_F, init_func_vid); +#endif int checkboard(void) { - enum boot_src src = get_boot_src(); char buf[64]; + + cpu_name(buf); + +#if IS_ENABLED(CONFIG_FSL_QIXIS) + enum boot_src src = get_boot_src(); u8 sw; #if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS) int clock; @@ -258,7 +262,6 @@ int checkboard(void) "100 separate SSCG"}; #endif - cpu_name(buf); #if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS) printf("Board: %s-QDS, ", buf); #else @@ -325,7 +328,10 @@ int checkboard(void) clock = sw >> 4; printf("Clock1 = %sMHz Clock2 = %sMHz\n", freq[clock], freq[clock]); #endif -#endif +#endif /* LX2160ARDB-inside-QIXIS switch */ +#else /* !CONFIG_FSL_QIXIS */ + printf("Board: %s\n", buf); +#endif /* CONFIG_FSL_QIXIS */ return 0; } @@ -554,7 +560,7 @@ int board_init(void) out_le32(irq_ccsr + IRQCR_OFFSET / 4, AQR107_IRQ_MASK); #endif -#if !defined(CONFIG_SYS_EARLY_PCI_INIT) +#if defined(CONFIG_PCI) && !defined(CONFIG_SYS_EARLY_PCI_INIT) pci_init(); #endif return 0; @@ -788,7 +794,9 @@ int ft_board_setup(void *blob, struct bd_info *bd) ft_cpu_setup(blob, bd); +#if IS_ENABLED(CONFIG_FSL_MC_ENET) fdt_fixup_mc_ddr(&mc_memory_base, &mc_memory_size); +#endif if (mc_memory_base != 0) mc_memory_bank++; diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index 45b5cbdd85a..dc0d24dca0a 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -197,10 +197,10 @@ #define BOOT_TARGET_DEVICES_USB(func) #endif -#ifdef CONFIG_MMC +#ifdef CONFIG_CMD_MMC #define BOOT_TARGET_DEVICES_MMC(func, instance) func(MMC, mmc, instance) #else -#define BOOT_TARGET_DEVICES_MMC(func) +#define BOOT_TARGET_DEVICES_MMC(func, instance) #endif #ifdef CONFIG_SCSI |