diff options
| -rw-r--r-- | drivers/net/phy/micrel_ksz90x1.c | 32 |
1 files changed, 32 insertions, 0 deletions
diff --git a/drivers/net/phy/micrel_ksz90x1.c b/drivers/net/phy/micrel_ksz90x1.c index c48ae6e88f3..ce7f2e2cc44 100644 --- a/drivers/net/phy/micrel_ksz90x1.c +++ b/drivers/net/phy/micrel_ksz90x1.c @@ -389,6 +389,12 @@ U_BOOT_PHY_DRIVER(ksz9031) = { #define KSZ9131RN_DLL_ENABLE_DELAY 0 #define KSZ9131RN_DLL_DISABLE_DELAY BIT(12) +#define KSZ9131RN_COMMON_CTRL 0 +#define KSZ9131RN_COMMON_CTRL_INDIVIDUAL_LED_MODE BIT(4) + +#define KSZ9131RN_LED_ERRATA_REG 0x1e +#define KSZ9131RN_LED_ERRATA_BIT BIT(9) + static int ksz9131_config_rgmii_delay(struct phy_device *phydev) { struct phy_driver *drv = phydev->drv; @@ -436,6 +442,28 @@ static int ksz9131_config_rgmii_delay(struct phy_device *phydev) return ret; } +/* Silicon Errata DS80000693B + * + * When LEDs are configured in Individual Mode, LED1 is ON in a no-link + * condition. Workaround is to set register 0x1e, bit 9, this way LED1 behaves + * according to the datasheet (off if there is no link). + */ +static int ksz9131_led_errata(struct phy_device *phydev) +{ + int reg; + + reg = phy_read_mmd(phydev, KSZ9131RN_MMD_COMMON_CTRL_REG, + KSZ9131RN_COMMON_CTRL); + if (reg < 0) + return reg; + + if (!(reg & KSZ9131RN_COMMON_CTRL_INDIVIDUAL_LED_MODE)) + return 0; + + return phy_set_bits(phydev, MDIO_DEVAD_NONE, KSZ9131RN_LED_ERRATA_REG, + KSZ9131RN_LED_ERRATA_BIT); +} + static int ksz9131_config(struct phy_device *phydev) { int ret; @@ -446,6 +474,10 @@ static int ksz9131_config(struct phy_device *phydev) return ret; } + ret = ksz9131_led_errata(phydev); + if (ret < 0) + return ret; + /* add an option to disable the gigabit feature of this PHY */ if (env_get("disable_giga")) { unsigned features; |