diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/dts/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/dts/armada-385-synology-ds116.dts | 291 | ||||
| -rw-r--r-- | arch/arm/dts/armada-385-thecus-n2350.dts | 446 | ||||
| -rw-r--r-- | arch/arm/dts/kirkwood-pogoplug-series-4-u-boot.dtsi | 7 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/Kconfig | 1 | ||||
| -rw-r--r-- | arch/arm/mach-mvebu/Kconfig | 18 |
6 files changed, 765 insertions, 0 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index d9b719f85dd..9d647b96393 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -247,6 +247,8 @@ dtb-$(CONFIG_ARCH_MVEBU) += \ armada-385-atl-x530.dtb \ armada-385-atl-x530DP.dtb \ armada-385-db-88f6820-amc.dtb \ + armada-385-synology-ds116.dtb \ + armada-385-thecus-n2350.dtb \ armada-385-turris-omnia.dtb \ armada-388-clearfog.dtb \ armada-388-gp.dtb \ diff --git a/arch/arm/dts/armada-385-synology-ds116.dts b/arch/arm/dts/armada-385-synology-ds116.dts new file mode 100644 index 00000000000..82a0373f7fb --- /dev/null +++ b/arch/arm/dts/armada-385-synology-ds116.dts @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device Tree file for Synology DS116 NAS + * + * Copyright (C) 2017 Willy Tarreau <[email protected]> + */ + +/dts-v1/; +#include "armada-385.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Synology DS116"; + compatible = "marvell,a385-gp", "marvell,armada385", "marvell,armada380"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; /* 1 GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; + + internal-regs { + i2c@11000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + clock-frequency = <100000>; + + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + }; + }; + + serial@12000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; + }; + + serial@12100 { + /* A PIC16F1829 is connected to uart1 at 9600 bps, + * and takes single-character orders : + * "1" : power off // already handled by the poweroff node + * "2" : short beep + * "3" : long beep + * "4" : turn the power LED ON + * "5" : flash the power LED + * "6" : turn the power LED OFF + * "7" : turn the status LED OFF + * "8" : turn the status LED ON + * "9" : flash the status LED + * "A" : flash the motherboard LED (D8) + * "B" : turn the motherboard LED OFF + * "C" : hard reset + */ + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; + }; + + poweroff@12100 { + compatible = "synology,power-off"; + reg = <0x12100 0x100>; + clocks = <&coreclk 0>; + }; + + ethernet@70000 { + pinctrl-names = "default"; + phy = <&phy0>; + phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + status = "okay"; + }; + + mdio@72004 { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; + + sata@a8000 { + pinctrl-names = "default"; + pinctrl-0 = <&sata0_pins>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port@0 { + reg = <0>; + target-supply = <®_5v_sata0>; + }; + }; + + bm@c8000 { + status = "okay"; + }; + + usb3@f0000 { + usb-phy = <&usb3_0_phy>; + status = "okay"; + }; + + usb3@f8000 { + usb-phy = <&usb3_1_phy>; + status = "okay"; + }; + }; + + bm-bppi { + status = "okay"; + }; + + gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>, + <&gpio1 17 GPIO_ACTIVE_HIGH>, + <&gpio1 16 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = < 0 0 + 1500 1 + 2500 2 + 3000 3 + 3400 4 + 3700 5 + 3900 6 + 4000 7>; + #cooling-cells = <2>; + }; + + gpio-leds { + compatible = "gpio-leds"; + + /* The green part is on gpio0.20 which is also used by + * sata0, and accesses to SATA disk 0 make it blink so it + * doesn't need to be declared here. + */ + orange { + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + label = "ds116:orange:disk"; + default-state = "off"; + }; + }; + }; + + usb3_0_phy: usb3_0_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_usb3_0_vbus>; + #phy-cells = <0>; + }; + + usb3_1_phy: usb3_1_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_usb3_1_vbus>; + #phy-cells = <0>; + }; + + reg_usb3_0_vbus: usb3-vbus0 { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus0"; + pinctrl-names = "default"; + pinctrl-0 = <&xhci0_vbus_pins>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + }; + + reg_usb3_1_vbus: usb3-vbus1 { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus1"; + pinctrl-names = "default"; + pinctrl-0 = <&xhci1_vbus_pins>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + }; + + reg_sata0: pwr-sata0 { + compatible = "regulator-fixed"; + regulator-name = "pwr_en_sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + regulator-boot-on; + gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>; + }; + + reg_5v_sata0: v5-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_sata0>; + }; + + reg_12v_sata0: v12-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <®_sata0>; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "macronix,mx25l6405d", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + m25p,fast-read; + + /* Note: there is a redboot partition table despite u-boot + * being used. The names presented here are the same as those + * found in the FIS directory. There is also a small device + * tree in the last 64kB of the RedBoot partition which is not + * enumerated. The MAC address and the serial number are listed + * in the "vendor" partition. + */ + partition@0 { + label = "RedBoot"; + reg = <0x00000000 0x000f0000>; + read-only; + }; + + partition@c0000 { + label = "zImage"; + reg = <0x000f0000 0x002d0000>; + }; + + partition@390000 { + label = "rd.gz"; + reg = <0x003c0000 0x00410000>; + }; + + partition@7d0000 { + label = "vendor"; + reg = <0x007d0000 0x00010000>; + read-only; + }; + + partition@7e0000 { + label = "RedBoot config"; + reg = <0x007e0000 0x00010000>; + read-only; + }; + + partition@7f0000 { + label = "FIS directory"; + reg = <0x007f0000 0x00010000>; + read-only; + }; + }; +}; + +&pinctrl { + /* use only one pin for UART1, as mpp20 is used by sata0 */ + uart1_pins: uart-pins-1 { + marvell,pins = "mpp19"; + marvell,function = "ua1"; + }; + + xhci0_vbus_pins: xhci0_vbus_pins { + marvell,pins = "mpp58"; + marvell,function = "gpio"; + }; + xhci1_vbus_pins: xhci1_vbus_pins { + marvell,pins = "mpp59"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/dts/armada-385-thecus-n2350.dts b/arch/arm/dts/armada-385-thecus-n2350.dts new file mode 100644 index 00000000000..fc29c4d25a8 --- /dev/null +++ b/arch/arm/dts/armada-385-thecus-n2350.dts @@ -0,0 +1,446 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device Tree file for Thecus N2350 board + * + * Copyright (C) 2018-2023 Tony Dinh <[email protected]> + * Copyright (C) 2018 Manuel Jung <[email protected]> + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "armada-385.dtsi" + +/ { + model = "Thecus N2350"; + compatible = "thecus,n2350", "marvell,armada385"; + + aliases { + ethernet0 = ð0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; /* 1GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; + + }; + + usb3_0_phy: usb3_0_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <&usb3_0_power>; + }; + + usb3_1_phy: usb3_1_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <&usb3_1_power>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_button &pmx_copy_button &pmx_reset_button>; + pinctrl-names = "default"; + + button@1 { + label = "Power Button"; + linux,code = <KEY_POWER>; + gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + }; + + button@2 { + label = "Copy Button"; + linux,code = <KEY_COPY>; + gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; + }; + + button@3 { + label = "Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_sata1_white_led + &pmx_sata1_red_led + &pmx_sata2_white_led + &pmx_sata2_red_led + &pmx_sys_white_led + &pmx_sys_red_led + &pmx_pwr_blue_led + &pmx_pwr_red_led + &pmx_usb_white_led + &pmx_usb_red_led>; + + pinctrl-names = "default"; + + white_sata1 { + label = "n2350:white:sata1"; + gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "ide-disk1"; + }; + + red_sata1 { + label = "n2350:red:sata1"; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + + white-sata2 { + label = "n2350:white:sata2"; + gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; + }; + + red-sata2 { + label = "n2350:red:sata2"; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + }; + + white-sys { + label = "n2350:white:sys"; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + red-sys { + label = "n2350:red:sys"; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; + }; + + blue-pwr { + label = "n2350:blue:pwr"; + gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; + + red-pwr { + label = "n2350:red:pwr"; + gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; + }; + + white-usb { + label = "n2350:white:usb"; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + }; + + red-usb { + label = "n2350:red:usb"; + gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb3_0_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB3_0_Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; + }; + + usb3_1_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB3_1_Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>; + }; + + reg_sata0: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "pwr_en_sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; + + reg_5v_sata0: v5-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_sata0>; + }; + + reg_12v_sata0: v12-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <®_sata0>; + }; + + reg_sata1: regulator@4 { + regulator-name = "pwr_en_sata1"; + compatible = "regulator-fixed"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; + }; + + reg_5v_sata1: v5-sata1 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_sata1>; + }; + + reg_12v_sata1: v12-sata1 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata1"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <®_sata1>; + }; + + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_pwr_off>; + pinctrl-names = "default"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + }; + +}; + +&ahci0 { + status = "okay"; +}; + +&bm { + status = "okay"; +}; + +&bm_bppi { + status = "okay"; +}; + +ð0 { + status = "okay"; + phy = <&phy0>; + phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <100000>; +}; + +&mdio { + phy0: ethernet-phy@0 { + reg = <1>; + }; +}; + +&nand_controller { + status = "okay"; + + nand@0 { + status = "okay"; + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "rootfs"; + reg = <0x00000000 0x20000000>; + }; + + }; + }; +}; + +&pciec { + status = "okay"; + /* + * The two PCIe units are accessible through + * standard PCIe slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + + pmx_power_button: pmx-power-button { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + + pmx_copy_button: pmx-copy-button { + marvell,pins = "mpp52"; + marvell,function = "gpio"; + }; + + pmx_reset_button: pmx-reset-button { + marvell,pins = "mpp50"; + marvell,function = "gpio"; + }; + + pmx_sata1_white_led: pmx-sata1-white-led { + marvell,pins = "mpp20"; + marvell,function = "gpio"; + }; + + pmx_sata1_red_led: pmx-sata1-red-led { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + pmx_sata2_white_led: pmx-sata2-white-led { + marvell,pins = "mpp19"; + marvell,function = "gpio"; + }; + + pmx_sata2_red_led: pmx-sata2-red-led { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + pmx_sys_white_led: pmx-sys-white-led { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + pmx_sys_red_led: pmx-sys-red-led { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + + pmx_buzzer: pmx-buzzer { + marvell,pins = "mpp51"; + marvell,function = "gpio"; + }; + + pmx_pwr_off: pmx-pwr-off { + marvell,pins = "mpp54"; + marvell,function = "gpio"; + }; + + pmx_pwr_blue_led: pmx-pwr-blue-led { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + + pmx_pwr_red_led: pmx-pwr-red-led { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; + + pmx_usb_white_led: pmx-usb-white-led { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + + pmx_usb_red_led: pmx-usb-red-led { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; +}; + +&sdhci { + broken-cd; + wp-inverted; + bus-width = <8>; + status = "okay"; + no-1-8-v; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + + /* spi: 4M Flash Macronix MX25L3205D */ + spi-flash@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "macronix,mx25l3205d", "jedec,spi-nor"; + reg = <0>; + + spi-max-frequency = <108000000>; + spi-cpha; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x00100000 0x00010000>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; diff --git a/arch/arm/dts/kirkwood-pogoplug-series-4-u-boot.dtsi b/arch/arm/dts/kirkwood-pogoplug-series-4-u-boot.dtsi new file mode 100644 index 00000000000..f9e127234c7 --- /dev/null +++ b/arch/arm/dts/kirkwood-pogoplug-series-4-u-boot.dtsi @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2023 Tony Dinh <[email protected]> + */ +&uart0 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 45cc9326368..b19ed2c6b3e 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -15,6 +15,7 @@ config SHEEVA_88SV131 config KIRKWOOD_COMMON bool select DM_SERIAL + select SYS_NS16550 config HAS_CUSTOM_SYS_INIT_SP_ADDR bool "Use a custom location for the initial stack pointer address" diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 594e9a03d90..16c5e722955 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -97,6 +97,9 @@ config 88F6820 config CUSTOMER_BOARD_SUPPORT bool +config DDR4 + bool "Support Marvell DDR4 Training driver" + choice prompt "Armada XP/375/38x/3700/7K/8K/Alleycat-5 board select" optional @@ -166,6 +169,10 @@ config TARGET_DB_MV784MP_GP select BOARD_ECC_SUPPORT select MV78460 +config TARGET_DS116 + bool "Support Synology DS116" + select 88F6820 + config TARGET_DS414 bool "Support Synology DS414" select MV78230 @@ -175,6 +182,11 @@ config TARGET_MAXBCM select BOARD_ECC_SUPPORT select MV78460 +config TARGET_N2350 + bool "Support Thecus N2350" + select 88F6820 + select DDR4 + config TARGET_THEADORABLE bool "Support theadorable Armada XP" select BOARD_LATE_INIT if USB @@ -255,8 +267,10 @@ config SYS_BOARD default "mvebu_armada-8k" if TARGET_MVEBU_ARMADA_8K default "octeontx2_cn913x" if TARGET_OCTEONTX2_CN913x default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP + default "ds116" if TARGET_DS116 default "ds414" if TARGET_DS414 default "maxbcm" if TARGET_MAXBCM + default "n2350" if TARGET_N2350 default "theadorable" if TARGET_THEADORABLE default "a38x" if TARGET_CONTROLCENTERDC default "x530" if TARGET_X530 @@ -274,8 +288,10 @@ config SYS_CONFIG_NAME default "mvebu_armada-8k" if TARGET_MVEBU_ARMADA_8K default "mvebu_armada-8k" if TARGET_OCTEONTX2_CN913x default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP + default "ds116" if TARGET_DS116 default "ds414" if TARGET_DS414 default "maxbcm" if TARGET_MAXBCM + default "n2350" if TARGET_N2350 default "theadorable" if TARGET_THEADORABLE default "turris_omnia" if TARGET_TURRIS_OMNIA default "turris_mox" if TARGET_TURRIS_MOX @@ -297,7 +313,9 @@ config SYS_VENDOR default "Marvell" if TARGET_MVEBU_DB_88F7040 default "solidrun" if TARGET_CLEARFOG default "kobol" if TARGET_HELIOS4 + default "Synology" if TARGET_DS116 default "Synology" if TARGET_DS414 + default "thecus" if TARGET_N2350 default "CZ.NIC" if TARGET_TURRIS_OMNIA default "CZ.NIC" if TARGET_TURRIS_MOX default "gdsys" if TARGET_CONTROLCENTERDC |