5 files changed, 13 insertions, 13 deletions
diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c
index 85025f20efa..2efede62aa5 100644
--- a/board/siemens/common/board.c
+++ b/board/siemens/common/board.c
@@ -85,7 +85,7 @@ int board_init(void)
 #ifdef CONFIG_MACH_TYPE
 	gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
 #endif
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+	gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100;
 
 #ifdef CONFIG_FACTORYSET
 	factoryset_read_eeprom(FACTORYSET_EEPROM_ADDR);
diff --git a/board/siemens/corvus/board.c b/board/siemens/corvus/board.c
index d87628097d0..569b86db00a 100644
--- a/board/siemens/corvus/board.c
+++ b/board/siemens/corvus/board.c
@@ -262,7 +262,7 @@ void at91_udp_hw_init(void)
 int board_init(void)
 {
 	/* address of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+	gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100;
 
 	/* we have to request the gpios again after relocation */
 	corvus_request_gpio();
@@ -287,8 +287,8 @@ int board_init(void)
 
 int dram_init(void)
 {
-	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
-				    CONFIG_SYS_SDRAM_SIZE);
+	gd->ram_size = get_ram_size((void *)CFG_SYS_SDRAM_BASE,
+				    CFG_SYS_SDRAM_SIZE);
 	return 0;
 }
 
diff --git a/board/siemens/iot2050/board.c b/board/siemens/iot2050/board.c
index b965ae9fa49..8f4b0eae495 100644
--- a/board/siemens/iot2050/board.c
+++ b/board/siemens/iot2050/board.c
@@ -146,7 +146,7 @@ int dram_init_banksize(void)
 	dram_init();
 
 	/* Bank 0 declares the memory available in the DDR low region */
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].start = CFG_SYS_SDRAM_BASE;
 	gd->bd->bi_dram[0].size = gd->ram_size;
 
 	/* Bank 1 declares the memory available in the DDR high region */
diff --git a/board/siemens/smartweb/smartweb.c b/board/siemens/smartweb/smartweb.c
index ce6c877959a..3d0f7341a37 100644
--- a/board/siemens/smartweb/smartweb.c
+++ b/board/siemens/smartweb/smartweb.c
@@ -167,7 +167,7 @@ int board_init(void)
 #endif
 
 	/* Adress of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+	gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100;
 
 	smartweb_nand_hw_init();
 	smartweb_macb_hw_init();
@@ -177,8 +177,8 @@ int board_init(void)
 int dram_init(void)
 {
 	gd->ram_size = get_ram_size(
-		(void *)CONFIG_SYS_SDRAM_BASE,
-		CONFIG_SYS_SDRAM_SIZE);
+		(void *)CFG_SYS_SDRAM_BASE,
+		CFG_SYS_SDRAM_SIZE);
 	return 0;
 }
 
diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c
index 47d3f6aef22..1eee972d49e 100644
--- a/board/siemens/taurus/taurus.c
+++ b/board/siemens/taurus/taurus.c
@@ -185,8 +185,8 @@ void mem_init(void)
 	sdramc_configure(AT91_SDRAMC_NC_10);
 
 	/* Do memtest for 128MB */
-	ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
-				CONFIG_SYS_SDRAM_SIZE);
+	ram_size = get_ram_size((void *)CFG_SYS_SDRAM_BASE,
+				CFG_SYS_SDRAM_SIZE);
 
 	/*
 	 * If 32MB or 16MB should be supported check also for
@@ -306,7 +306,7 @@ struct at91_udc_data board_udc_data  = {
 int board_init(void)
 {
 	/* adress of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+	gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100;
 
 	taurus_request_gpio();
 #ifdef CONFIG_CMD_NAND
@@ -326,8 +326,8 @@ int board_init(void)
 
 int dram_init(void)
 {
-	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
-				    CONFIG_SYS_SDRAM_SIZE);
+	gd->ram_size = get_ram_size((void *)CFG_SYS_SDRAM_BASE,
+				    CFG_SYS_SDRAM_SIZE);
 	return 0;
 }