4 files changed, 14 insertions, 14 deletions
diff --git a/doc/develop/bootstd/overview.rst b/doc/develop/bootstd/overview.rst
index 397f6db18b4..ec9fafa0fa0 100644
--- a/doc/develop/bootstd/overview.rst
+++ b/doc/develop/bootstd/overview.rst
@@ -152,7 +152,7 @@ boot_targets
 This environment variable can be used to control the list of bootdevs searched
 and their ordering, for example::
 
-   setenv boot_targets "mmc0 mmc1 usb pxe"
+   env set boot_targets "mmc0 mmc1 usb pxe"
 
 Entries may be removed or re-ordered in this list to affect the boot order. If
 the variable is empty, the default ordering is used, based on the priority of
@@ -169,7 +169,7 @@ used by the old distro scripts.
 This environment variable can be used to control the list of bootmeths used and
 their ordering for example::
 
-   setenv bootmeths "extlinux efi"
+   env set bootmeths "extlinux efi"
 
 Entries may be removed or re-ordered in this list to affect the order the
 bootmeths are tried on each bootdev. If the variable is empty, the default
diff --git a/doc/develop/distro.rst b/doc/develop/distro.rst
index 01efce40a29..5e906750119 100644
--- a/doc/develop/distro.rst
+++ b/doc/develop/distro.rst
@@ -384,22 +384,22 @@ boot_scripts:
 
 scan_dev_for_extlinux:
   If you want to disable extlinux.conf on all disks, set the value to something
-  innocuous, e.g. setenv scan_dev_for_extlinux true.
+  innocuous, e.g. env set scan_dev_for_extlinux true.
 
 scan_dev_for_scripts:
   If you want to disable boot.scr on all disks, set the value to something
-  innocuous, e.g. setenv scan_dev_for_scripts true.
+  innocuous, e.g. env set scan_dev_for_scripts true.
 
 boot_net_usb_start:
   If you want to prevent USB enumeration by distro boot commands which execute
-  network operations, set the value to something innocuous, e.g. setenv
+  network operations, set the value to something innocuous, e.g. env set
   boot_net_usb_start true. This would be useful if you know your Ethernet
   device is not attached to USB, and you wish to increase boot speed by
   avoiding unnecessary actions.
 
 boot_net_pci_enum:
   If you want to prevent PCI enumeration by distro boot commands which execute
-  network operations, set the value to something innocuous, e.g. setenv
+  network operations, set the value to something innocuous, e.g. env set
   boot_net_pci_enum true. This would be useful if you know your Ethernet
   device is not attached to PCI, and you wish to increase boot speed by
   avoiding unnecessary actions.
diff --git a/doc/develop/uefi/u-boot_on_efi.rst b/doc/develop/uefi/u-boot_on_efi.rst
index 177e887ebd9..883bd2b1451 100644
--- a/doc/develop/uefi/u-boot_on_efi.rst
+++ b/doc/develop/uefi/u-boot_on_efi.rst
@@ -300,9 +300,9 @@ Content of **boot.scr**:
 .. code-block:: bash
 
   ext4load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} ${prefix}Image
-  setenv kernel_size ${filesize}
+  env set kernel_size ${filesize}
   ext4load ${devtype} ${devnum}:${distro_bootpart} ${ramdisk_addr_r} ${prefix}Initrd
-  setenv initrd_size ${filesize}
+  env set initrd_size ${filesize}
   zboot  ${kernel_addr_r} ${kernel_size} ${ramdisk_addr_r} ${initrd_size}
 
 Extlinux configuration
diff --git a/doc/develop/uefi/uefi.rst b/doc/develop/uefi/uefi.rst
index 3ca22b572a9..6fd1db6606d 100644
--- a/doc/develop/uefi/uefi.rst
+++ b/doc/develop/uefi/uefi.rst
@@ -170,11 +170,11 @@ Sign an image with one of the keys in "db" on your host
 Now in U-Boot install the keys on your board::
 
     fatload mmc 0:1 <tmpaddr> PK.auth
-    setenv -e -nv -bs -rt -at -i <tmpaddr>:$filesize PK
+    env set -e -nv -bs -rt -at -i <tmpaddr>:$filesize PK
     fatload mmc 0:1 <tmpaddr> KEK.auth
-    setenv -e -nv -bs -rt -at -i <tmpaddr>:$filesize KEK
+    env set -e -nv -bs -rt -at -i <tmpaddr>:$filesize KEK
     fatload mmc 0:1 <tmpaddr> db.auth
-    setenv -e -nv -bs -rt -at -i <tmpaddr>:$filesize db
+    env set -e -nv -bs -rt -at -i <tmpaddr>:$filesize db
 
 Set up boot parameters on your board::
 
@@ -412,7 +412,7 @@ bit in OsIndications variable with
 
 .. code-block:: console
 
-    => setenv -e -nv -bs -rt -v OsIndications =0x0000000000000004
+    => env set -e -nv -bs -rt -v OsIndications =0x0000000000000004
 
 Since U-Boot doesn't currently support SetVariable at runtime, its value
 won't be taken over across the reboot. If this is the case, you can skip
@@ -698,7 +698,7 @@ end up with "host not found".
 
 We need to preset the "httpserverip" environment variable to proceed the wget::
 
-    setenv httpserverip 192.168.1.1
+    env set httpserverip 192.168.1.1
 
 UEFI HTTP(s) Boot using lwIP
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -789,7 +789,7 @@ If the environment variable is set to 'list' a list of all tests is shown.
 
 Below you can find the output of an example session::
 
-    => setenv efi_selftest simple network protocol
+    => env set efi_selftest simple network protocol
     => bootefi selftest
     Testing EFI API implementation
     Selected test: 'simple network protocol'