diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/device-tree-bindings/serial/mcf-uart.txt | 19 | ||||
| -rw-r--r-- | doc/device-tree-bindings/spi/spi-mcf-dspi.txt | 30 |
2 files changed, 49 insertions, 0 deletions
diff --git a/doc/device-tree-bindings/serial/mcf-uart.txt b/doc/device-tree-bindings/serial/mcf-uart.txt new file mode 100644 index 00000000000..d73f764c019 --- /dev/null +++ b/doc/device-tree-bindings/serial/mcf-uart.txt @@ -0,0 +1,19 @@ +Freescale ColdFire UART + +Required properties: +- compatible : should be "fsl,mcf-uart" +- reg: start address and size of the registers + +Example: + +soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + uart0: uart@fc060000 { + compatible = "fsl,mcf-uart"; + reg = <0xfc060000 0x40>; + status = "disabled"; + }; +}; diff --git a/doc/device-tree-bindings/spi/spi-mcf-dspi.txt b/doc/device-tree-bindings/spi/spi-mcf-dspi.txt new file mode 100644 index 00000000000..860eb8ac852 --- /dev/null +++ b/doc/device-tree-bindings/spi/spi-mcf-dspi.txt @@ -0,0 +1,30 @@ +Freescale ColdFire DSPI controller + +Required properties: +- compatible : "fsl,mcf-dspi" +- #address-cells: <1>, as required by generic SPI binding +- #size-cells: <0>, also as required by generic SPI binding +- reg : offset and length of the register set for the device + +Optional properties: +- spi-max-frequency : max supported spi frequency +- num-cs : the number of the chipselect signals +- spi-mode: spi motorola mode, 0 to 3 +- ctar-params: CTAR0 to 7 register configuration, as an array + of 8 integer fields for each register, where each register + is defined as: <fmsz, pcssck, pasc, pdt, cssck, asc, dt, br>. + +Example: + +dspi0: dspi@fc05c000 { + compatible = "fsl,mcf-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfc05c000 0x100>; + spi-max-frequency = <50000000>; + num-cs = <4>; + spi-mode = <0>; + ctar-fields = <7, 0, 0, 0, 0, 0, 1, 6>, + <7, 0, 0, 0, 0, 0, 1, 6>, + <7, 0, 0, 0, 0, 0, 1, 6>; +}; |