2 files changed, 0 insertions, 80 deletions
diff --git a/doc/board/renesas/index.rst b/doc/board/renesas/index.rst
index 34e62baff62..401ffcf61b2 100644
--- a/doc/board/renesas/index.rst
+++ b/doc/board/renesas/index.rst
@@ -6,5 +6,4 @@ Renesas
 .. toctree::
    :maxdepth: 2
 
-   sh7752evb
    sh7753evb
diff --git a/doc/board/renesas/sh7752evb.rst b/doc/board/renesas/sh7752evb.rst
deleted file mode 100644
index 272d6dde053..00000000000
--- a/doc/board/renesas/sh7752evb.rst
+++ /dev/null
@@ -1,79 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0+
-
-R0P7752C00000RZ board
-=====================
-
-This board specification
-------------------------
-
-The R0P7752C00000RZ(board config name:sh7752evb) has the following device:
-
- - SH7752 (SH-4A)
- - DDR3-SDRAM 512MB
- - SPI ROM 8MB
- - Gigabit Ethernet controllers
- - eMMC 4GB
-
-
-Configuration for This board
-----------------------------
-
-You can select the configuration as follows:
-
- - make sh7752evb_config
-
-
-This board specific command
----------------------------
-
-This board has the following its specific command:
-
-write_mac:
-  You can write MAC address to SPI ROM.
-
-Usage 1: Write MAC address
-
-.. code-block:: none
-
-   write_mac [GETHERC ch0] [GETHERC ch1]
-
-   For example:
-   => write_mac 74:90:50:00:33:9e 74:90:50:00:33:9f
-
-* We have to input the command as a single line (without carriage return)
-* We have to reset after input the command.
-
-Usage 2: Show current data
-
-.. code-block:: none
-
-   write_mac
-
-   For example:
-   => write_mac
-      GETHERC ch0 = 74:90:50:00:33:9e
-      GETHERC ch1 = 74:90:50:00:33:9f
-
-
-Update SPI ROM
---------------
-
-1. Copy u-boot image to RAM area.
-2. Probe SPI device.
-
-.. code-block:: none
-
-   => sf probe 0
-   SF: Detected MX25L6405D with page size 64KiB, total 8 MiB
-
-3. Erase SPI ROM.
-
-.. code-block:: none
-
-   => sf erase 0 80000
-
-4. Write u-boot image to SPI ROM.
-
-.. code-block:: none
-
-   => sf write 0x48000000 0 80000