diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/board/coreboot/coreboot.rst | 29 | ||||
| -rw-r--r-- | doc/develop/event.rst | 6 |
2 files changed, 32 insertions, 3 deletions
diff --git a/doc/board/coreboot/coreboot.rst b/doc/board/coreboot/coreboot.rst index 4a5f101cad2..0fe95af56d2 100644 --- a/doc/board/coreboot/coreboot.rst +++ b/doc/board/coreboot/coreboot.rst @@ -71,3 +71,32 @@ Memory map (typically redirects to 7ab10030 or similar) 500 Location of coreboot sysinfo table, used during startup ========== ================================================================== + + +Debug UART +---------- + +It is possible to enable the debug UART with coreboot. To do this, use the +info from the cbsysinfo command to locate the UART base. For example:: + + => cbsysinfo + ... + Serial I/O port: 00000000 + base : 00000000 + pointer : 767b51bc + type : 2 + base : fe03e000 + baud : 0d115200 + regwidth : 4 + input_hz : 0d1843200 + PCI addr : 00000010 + ... + +Here you can see that the UART base is fe03e000, regwidth is 4 (1 << 2) and the +input clock is 1843200. So you can add the following CONFIG options:: + + CONFIG_DEBUG_UART=y + CONFIG_DEBUG_UART_BASE=fe03e000 + CONFIG_DEBUG_UART_CLOCK=1843200 + CONFIG_DEBUG_UART_SHIFT=2 + CONFIG_DEBUG_UART_ANNOUNCE=y diff --git a/doc/develop/event.rst b/doc/develop/event.rst index e60cbf65691..1c1c9ef7f1b 100644 --- a/doc/develop/event.rst +++ b/doc/develop/event.rst @@ -11,7 +11,7 @@ block device is probed. Rather than using weak functions and direct calls across subsystemss, it is often easier to use an event. -An event consists of a type (e.g. EVT_DM_POST_INIT) and some optional data, +An event consists of a type (e.g. EVT_DM_POST_INIT_F) and some optional data, in `union event_data`. An event spy can be created to watch for events of a particular type. When the event is created, it is sent to each spy in turn. @@ -26,9 +26,9 @@ To declare a spy, use something like this:: /* do something */ return 0; } - EVENT_SPY(EVT_DM_POST_INIT, snow_setup_cpus); + EVENT_SPY(EVT_DM_POST_INIT_F, snow_setup_cpus); -Your function is called when EVT_DM_POST_INIT is emitted, i.e. after driver +Your function is called when EVT_DM_POST_INIT_F is emitted, i.e. after driver model is inited (in SPL, or in U-Boot proper before and after relocation). |