diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/phy/airoha/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/net/phy/airoha/air_en8811.c | 60 |
2 files changed, 45 insertions, 16 deletions
diff --git a/drivers/net/phy/airoha/Kconfig b/drivers/net/phy/airoha/Kconfig index da8747939e3..4139df343ad 100644 --- a/drivers/net/phy/airoha/Kconfig +++ b/drivers/net/phy/airoha/Kconfig @@ -7,6 +7,7 @@ config PHY_AIROHA_EN8811 depends on PHY_AIROHA depends on SUPPORTS_FW_LOADER select FW_LOADER + select PHY_COMMON_PROPS help AIROHA EN8811H supported. AIROHA AN8811HB supported. diff --git a/drivers/net/phy/airoha/air_en8811.c b/drivers/net/phy/airoha/air_en8811.c index 0b974472732..32f06dd6dfa 100644 --- a/drivers/net/phy/airoha/air_en8811.c +++ b/drivers/net/phy/airoha/air_en8811.c @@ -23,6 +23,7 @@ #include <linux/compat.h> #include <dm/device_compat.h> #include <u-boot/crc.h> +#include <linux/phy/phy-common-props.h> /* MII Registers */ #define AIR_AUX_CTRL_STATUS 0x1d @@ -1046,11 +1047,50 @@ static int air_leds_init(struct phy_device *phydev, int num, u16 dur, int mode) return 0; } -static int en8811h_config(struct phy_device *phydev) +static int en8811h_config_serdes_polarity(struct phy_device *phydev) { - struct en8811h_priv *priv = phydev->priv; ofnode node = phy_get_ofnode(phydev); + unsigned int pol, default_pol; u32 pbus_value = 0; + int ret; + + if (!ofnode_valid(node)) + return 0; + + default_pol = PHY_POL_NORMAL; + if (ofnode_read_bool(node, "airoha,pnswap-rx")) + default_pol = PHY_POL_INVERT; + + ret = phy_get_rx_polarity(node, + phy_string_for_interface(phydev->interface), + BIT(PHY_POL_NORMAL) | BIT(PHY_POL_INVERT), + default_pol, &pol); + if (ret) + return ret; + if (pol == PHY_POL_INVERT) + pbus_value |= EN8811H_POLARITY_RX_REVERSE; + + default_pol = PHY_POL_NORMAL; + if (ofnode_read_bool(node, "airoha,pnswap-tx")) + default_pol = PHY_POL_INVERT; + + ret = phy_get_tx_polarity(node, + phy_string_for_interface(phydev->interface), + BIT(PHY_POL_NORMAL) | BIT(PHY_POL_INVERT), + default_pol, &pol); + if (ret) + return ret; + if (pol == PHY_POL_NORMAL) + pbus_value |= EN8811H_POLARITY_TX_NORMAL; + + return air_buckpbus_reg_modify(phydev, EN8811H_POLARITY, + EN8811H_POLARITY_RX_REVERSE | + EN8811H_POLARITY_TX_NORMAL, pbus_value); +} + +static int en8811h_config(struct phy_device *phydev) +{ + struct en8811h_priv *priv = phydev->priv; int ret = 0; /* If restart happened in .probe(), no need to restart now */ @@ -1081,20 +1121,8 @@ static int en8811h_config(struct phy_device *phydev) if (ret < 0) return ret; - /* Serdes polarity */ - pbus_value = 0; - if (ofnode_read_bool(node, "airoha,pnswap-rx")) - pbus_value |= EN8811H_POLARITY_RX_REVERSE; - else - pbus_value &= ~EN8811H_POLARITY_RX_REVERSE; - if (ofnode_read_bool(node, "airoha,pnswap-tx")) - pbus_value &= ~EN8811H_POLARITY_TX_NORMAL; - else - pbus_value |= EN8811H_POLARITY_TX_NORMAL; - ret = air_buckpbus_reg_modify(phydev, EN8811H_POLARITY, - EN8811H_POLARITY_RX_REVERSE | - EN8811H_POLARITY_TX_NORMAL, - pbus_value); + /* Configure Serdes polarity from device tree */ + ret = en8811h_config_serdes_polarity(phydev); if (ret < 0) return ret; |