diff options
Diffstat (limited to 'include/configs/mx6sabre_common.h')
| -rw-r--r-- | include/configs/mx6sabre_common.h | 122 |
1 files changed, 0 insertions, 122 deletions
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index ef2848b71f3..d3a57a10a16 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -8,133 +8,11 @@ #ifndef __MX6QSABRE_COMMON_CONFIG_H #define __MX6QSABRE_COMMON_CONFIG_H -#include <linux/stringify.h> - #include "mx6_common.h" /* MMC Configs */ #define CFG_SYS_FSL_ESDHC_ADDR 0 -#ifdef CONFIG_SUPPORT_EMMC_BOOT -#define EMMC_ENV \ - "emmcdev=2\0" \ - "update_emmc_firmware=" \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "if ${get_cmd} ${update_sd_firmware_filename}; then " \ - "if mmc dev ${emmcdev} 1; then " \ - "setexpr fw_sz ${filesize} / 0x200; " \ - "setexpr fw_sz ${fw_sz} + 1; " \ - "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ - "fi; " \ - "fi\0" -#else -#define EMMC_ENV "" -#endif - -#define CFG_EXTRA_ENV_SETTINGS \ - "script=boot.scr\0" \ - "image=zImage\0" \ - "fdtfile=undefined\0" \ - "fdt_addr=0x18000000\0" \ - "boot_fdt=try\0" \ - "ip_dyn=yes\0" \ - "console=" CONSOLE_DEV "\0" \ - "dfuspi=dfu 0 sf 0:0:10000000:0\0" \ - "dfu_alt_info_spl=spl raw 0x400\0" \ - "dfu_alt_info_img=u-boot raw 0x10000\0" \ - "dfu_alt_info=spl raw 0x400\0" \ - "initrd_high=0xffffffff\0" \ - "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ - "mmcdev=" __stringify(CONFIG_ENV_MMC_DEVICE_INDEX) "\0" \ - "mmcpart=1\0" \ - "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \ - "update_sd_firmware=" \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "if mmc dev ${mmcdev}; then " \ - "if ${get_cmd} ${update_sd_firmware_filename}; then " \ - "setexpr fw_sz ${filesize} / 0x200; " \ - "setexpr fw_sz ${fw_sz} + 1; " \ - "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ - "fi; " \ - "fi\0" \ - EMMC_ENV \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "root=PARTUUID=${uuid} rootwait rw\0" \ - "loadbootscript=" \ - "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script} || " \ - "load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ - "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image} || " \ - "load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${image}\0" \ - "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile} || " \ - "load mmc ${mmcdev}:${mmcpart} ${fdt_addr} boot/${fdtfile}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run finduuid; " \ - "run mmcargs; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if run loadfdt; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootz; " \ - "fi;\0" \ - "netargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ - "run netargs; " \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "${get_cmd} ${image}; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if ${get_cmd} ${fdt_addr} ${fdtfile}; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootz; " \ - "fi;\0" \ - "findfdt="\ - "if test $fdtfile = undefined; then " \ - "if test $board_name = SABREAUTO && test $board_rev = MX6QP; then " \ - "setenv fdtfile imx6qp-sabreauto.dtb; fi; " \ - "if test $board_name = SABREAUTO && test $board_rev = MX6Q; then " \ - "setenv fdtfile imx6q-sabreauto.dtb; fi; " \ - "if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \ - "setenv fdtfile imx6dl-sabreauto.dtb; fi; " \ - "if test $board_name = SABRESD && test $board_rev = MX6QP; then " \ - "setenv fdtfile imx6qp-sabresd.dtb; fi; " \ - "if test $board_name = SABRESD && test $board_rev = MX6Q; then " \ - "setenv fdtfile imx6q-sabresd.dtb; fi; " \ - "if test $board_name = SABRESD && test $board_rev = MX6DL; then " \ - "setenv fdtfile imx6dl-sabresd.dtb; fi; " \ - "if test $fdtfile = undefined; then " \ - "echo WARNING: Could not determine dtb to use; fi; " \ - "fi;\0" \ - /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR |