diff options
Diffstat (limited to 'include/env')
| -rw-r--r-- | include/env/nxp/mx6sabre_common.env | 114 |
1 files changed, 114 insertions, 0 deletions
diff --git a/include/env/nxp/mx6sabre_common.env b/include/env/nxp/mx6sabre_common.env new file mode 100644 index 00000000000..5346cd4e953 --- /dev/null +++ b/include/env/nxp/mx6sabre_common.env @@ -0,0 +1,114 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ + +script=boot.scr +image=zImage +fdtfile=undefined +fdt_addr=0x18000000 +boot_fdt=try +ip_dyn=yes +dfuspi=dfu 0 sf 0:0:10000000:0 +dfu_alt_info_spl=spl raw 0x400 +dfu_alt_info_img=u-boot raw 0x10000 +dfu_alt_info=spl raw 0x400 +initrd_high=0xffffffff +splashimage=CONFIG_SYS_LOAD_ADDR +mmcdev=CONFIG_ENV_MMC_DEVICE_INDEX +mmcpart=1 +finduuid=part uuid mmc ${mmcdev}:2 uuid +update_sd_firmware=if test ${ip_dyn} = yes; then + setenv get_cmd dhcp; + else + setenv get_cmd tftp; + fi; + if mmc dev ${mmcdev}; then + if ${get_cmd} ${update_sd_firmware_filename}; then + setexpr fw_sz ${filesize} / 0x200; + setexpr fw_sz ${fw_sz} + 1; + mmc write ${loadaddr} 0x2 ${fw_sz}; + fi; + fi +#ifdef CONFIG_SUPPORT_EMMC_BOOT +emmcdev=2 +update_emmc_firmware=if test ${ip_dyn} = yes; then + setenv get_cmd dhcp; + else + setenv get_cmd tftp; + fi; + if ${get_cmd} ${update_sd_firmware_filename}; then + if mmc dev ${emmcdev} 1; then + setexpr fw_sz ${filesize} / 0x200; + setexpr fw_sz ${fw_sz} + 1; + mmc write ${loadaddr} 0x2 ${fw_sz}; + fi; + fi +#endif +mmcargs=setenv bootargs console=${console},${baudrate} root=PARTUUID=${uuid} rootwait rw +loadbootscript=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script} || + load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${script}; +bootscript=echo Running bootscript from mmc ...; source +loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image} || + load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${image} +loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile} || + load mmc ${mmcdev}:${mmcpart} ${fdt_addr} boot/${fdtfile} +mmcboot=echo Booting from mmc ...; + run finduuid; + run mmcargs; + if test ${boot_fdt} = yes || test ${boot_fdt} = try; then + if run loadfdt; then + bootz ${loadaddr} - ${fdt_addr}; + else + if test ${boot_fdt} = try; then + bootz; + else + echo WARN: Cannot load the DT; + fi; + fi; + else + bootz; + fi; +netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs + ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp +netboot=echo Booting from net ...; + run netargs; + if test ${ip_dyn} = yes; then + setenv get_cmd dhcp; + else + setenv get_cmd tftp; + fi; + ${get_cmd} ${image}; + if test ${boot_fdt} = yes || test ${boot_fdt} = try; then + if ${get_cmd} ${fdt_addr} ${fdtfile}; then + bootz ${loadaddr} - ${fdt_addr}; + else + if test ${boot_fdt} = try; then + bootz; + else + echo WARN: Cannot load the DT; + fi; + fi; + else + bootz; + fi; +findfdt=if test $fdtfile = undefined; then + if test $board_name = SABREAUTO && test $board_rev = MX6QP; then + setenv fdtfile imx6qp-sabreauto.dtb; + fi; + if test $board_name = SABREAUTO && test $board_rev = MX6Q; then + setenv fdtfile imx6q-sabreauto.dtb; + fi; + if test $board_name = SABREAUTO && test $board_rev = MX6DL; then + setenv fdtfile imx6dl-sabreauto.dtb; + fi; + if test $board_name = SABRESD && test $board_rev = MX6QP; then + setenv fdtfile imx6qp-sabresd.dtb; + fi; + if test $board_name = SABRESD && test $board_rev = MX6Q; then + setenv fdtfile imx6q-sabresd.dtb; + fi; + if test $board_name = SABRESD && test $board_rev = MX6DL; then + setenv fdtfile imx6dl-sabresd.dtb; + fi; + if test $fdtfile = undefined; then + echo WARNING: Could not determine dtb to use; + fi; + fi; |