2 files changed, 31 insertions, 76 deletions
diff --git a/include/configs/sc573-ezkit.h b/include/configs/sc573-ezlite.h
index 42e42f8150b..590a8f06fb5 100644
--- a/include/configs/sc573-ezkit.h
+++ b/include/configs/sc573-ezlite.h
@@ -3,8 +3,8 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-#ifndef __CONFIG_SC573_EZKIT_H
-#define __CONFIG_SC573_EZKIT_H
+#ifndef __CONFIG_SC573_EZLITE_H
+#define __CONFIG_SC573_EZLITE_H
 
 /*
  * Memory Settings
diff --git a/include/env/adi/adi_boot.env b/include/env/adi/adi_boot.env
index db4148b1af9..3c83826cf9a 100644
--- a/include/env/adi/adi_boot.env
+++ b/include/env/adi/adi_boot.env
@@ -1,13 +1,3 @@
-/*
- * A target board needs to set these variables for the commands below to work:
- *
- * - adi_stage2_offset, the location of stage2-boot.ldr on the SPI flash
- * - adi_image_offset, location of the fitImage on the SPI flash
- * - adi_rfs_offset, location of the RFS on the SPI flash
- * - loadaddr, where you want to load things
- * - jffs2file, name of the jffs2 file for update, ex adsp-sc5xx-tiny-adsp-sc573.jffs2
- */
-
 #ifdef CONFIG_SC59X_64
 #define EARLY_PRINTK earlycon=adi_uart,0x31003000
 #else
@@ -15,106 +5,71 @@
 #endif
 
 /* Config options */
-imagefile=fitImage
 ethaddr=02:80:ad:20:31:e8
 eth1addr=02:80:ad:20:31:e9
+httpdstp=8000
 uart_console=CONFIG_UART_CONSOLE
 #ifdef CONFIG_SC59X_64
 initrd_high=0xffffffffffffffff
 #else
 initrd_high=0xffffffff
 #endif
-
-/* Helper routines */
-init_ethernet=mii info;
-	dhcp;
-	setenv serverip ${tftpserverip}
+#if defined(CONFIG_SC59X) || defined(CONFIG_SC59X_64)
+adi_image_offset=0x100000
+#else
+adi_image_offset=0xd0000
+#endif
 
 /* Args for each boot mode */
 adi_bootargs=EARLY_PRINTK console=ttySC0,CONFIG_BAUDRATE vmalloc=512M
 ramargs=setenv bootargs ${adi_bootargs}
 
 addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:eth0:off
+rootpath=/romfs
 
 /* Boot modes are selectable and should be defined in the board env before including */
 #if defined(USE_NFS)
-// rootpath is set by CONFIG_ROOTPATH
 nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath},tcp,nfsvers=3 ${adi_bootargs}
-nfsboot=run init_ethernet;
-	tftp ${loadaddr} ${tftp_dir_prefix}${imagefile};
-	run nfsargs;
+nfsboot=run nfsargs;
 	run addip;
-	bootm ${loadaddr}
+	wget ${loadaddr} ${serverip}:/fitImage;
+	bootm
 #endif
 
 #if defined(USE_MMC)
-mmcargs=setenv bootargs root=/dev/mmcblk0p1 rw rootfstype=ext4 rootwait ${adi_bootargs}
+mmcargs=setenv bootargs root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait ${adi_bootargs}
 mmcboot=mmc rescan;
-	ext4load mmc 0:1 ${loadaddr} /boot/${imagefile};
+	ext4load mmc 0:1 ${loadaddr} /fitImage;
 	run mmcargs;
-	bootm ${loadaddr}
+	bootm
 #endif
 
-#if defined(USE_SPI) || defined(USE_OSPI)
-spiargs=setenv bootargs root=/dev/mtdblock4 rw rootfstype=jffs2 ${adi_bootargs}
+#if defined(USE_SPI)
+spiargs=setenv bootargs rootfstype=ubifs root=ubi0:rootfs ubi.mtd=3 rw ${adi_bootargs}; setenv sfdev CONFIG_SC_BOOT_SPI_BUS:CONFIG_SC_BOOT_SPI_SSEL
 spiboot=run spiargs;
 	sf probe ${sfdev};
-	sf read ${loadaddr} ${adi_image_offset} ${imagesize};
+	sf read ${loadaddr} ${adi_image_offset} 0xf00000;
 	bootm ${loadaddr}
 #endif
 
 #if defined(USE_OSPI)
-ospiboot=run spiboot
+ospiargs=setenv bootargs rootfstype=ubifs root=ubi0:rootfs ubi.mtd=3 rw ${adi_bootargs}; setenv sfdev CONFIG_SC_BOOT_OSPI_BUS:CONFIG_SC_BOOT_OSPI_SSEL
+ospiboot=run ospiargs;
+	sf probe ${sfdev};
+	sf read ${loadaddr} ${adi_image_offset} 0xf00000;
+	bootm ${loadaddr}
 #endif
 
 #if defined(USE_RAM)
-ramboot=run init_ethernet;
-	tftp ${loadaddr} ${tfpt_dir_prefix}${imagefile};
+ramboot=wget ${loadaddr} ${serverip}:/fitImage;
 	run ramargs;
-	bootm ${loadaddr}
+	bootm
 #endif
 
-/* Update commands */
-stage1file=stage1-boot.ldr
-stage2file=stage2-boot.ldr
-
-#if defined(USE_SPI) || defined(USE_OSPI)
-update_spi_uboot_stage1=tftp ${loadaddr} ${tftp_dir_prefix}${stage1file};
-	sf probe ${sfdev};
-	sf update ${loadaddr} 0x0 ${filesize}
-update_spi_uboot_stage2=tftp ${loadaddr} ${tftp_dir_prefix}${stage2file};
-	sf probe ${sfdev};
-	sf update ${loadaddr} ${adi_stage2_offset} ${filesize}
-update_spi_uboot=run update_spi_uboot_stage1;
-	run update_spi_uboot_stage2;
-update_spi_fit=tftp ${loadaddr} ${tftp_dir_prefix}${imagefile};
-	sf probe ${sfdev};
-	sf update ${loadaddr} ${adi_image_offset} ${filesize};
-	setenv imagesize ${filesize}
-update_spi_rfs=tftp ${loadaddr} ${tftp_dir_prefix}${jffs2file};
-	sf probe ${sfdev};
-	sf update ${loadaddr} ${adi_rfs_offset} ${filesize}
-
-start_update_spi=run init_ethernet;
-	run update_spi_uboot;
-	run update_spi_fit;
-	run update_spi_rfs;
-start_update_spi_uboot_only=run init_ethernet;
-	run update_spi_uboot;
-#endif
-
-#if defined(USE_SPI)
-update_spi=setenv sfdev CONFIG_SC_BOOT_SPI_BUS:CONFIG_SC_BOOT_SPI_SSEL;
-	setenv bootcmd run spiboot;
-	setenv argscmd spiargs;
-	run start_update_spi;
-	saveenv
-#endif
-
-#if defined(USE_OSPI)
-update_ospi=setenv sfdev CONFIG_SC_BOOT_OSPI_BUS:CONFIG_SC_BOOT_OSPI_SSEL;
-	setenv bootcmd run ospiboot;
-	setenv argscmd spiargs;
-	run start_update_spi;
-	saveenv
+#if defined(USE_USB)
+usbargs=setenv bootargs root=/dev/sda2 rw rootfstype=ext4 rootwait ${adi_bootargs}
+usbboot=usb start;
+	run usbargs;
+	ext4load usb 0:1 ${loadaddr} /fitImage;
+	bootm ${loadaddr}
 #endif