summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/configs/suniv.h14
-rw-r--r--include/configs/sunxi-common.h64
-rw-r--r--include/dt-bindings/clock/suniv-ccu-f1c100s.h70
-rw-r--r--include/dt-bindings/reset/suniv-ccu-f1c100s.h38
4 files changed, 164 insertions, 22 deletions
diff --git a/include/configs/suniv.h b/include/configs/suniv.h
new file mode 100644
index 00000000000..6118cd5e1a6
--- /dev/null
+++ b/include/configs/suniv.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration settings for new Allwinner F-series (suniv) CPU
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * Include common sunxi configuration where most the settings are
+ */
+#include <configs/sunxi-common.h>
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 7260eb72a40..4bab917c0b7 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -22,7 +22,12 @@
/* Serial & console */
#define CONFIG_SYS_NS16550_SERIAL
/* ns16550 reg in the low bits of cpu reg */
+#ifdef CONFIG_MACH_SUNIV
+/* suniv doesn't have apb2 and uart is connected to apb1 */
+#define CONFIG_SYS_NS16550_CLK 100000000
+#else
#define CONFIG_SYS_NS16550_CLK 24000000
+#endif
#ifndef CONFIG_DM_SERIAL
# define CONFIG_SYS_NS16550_REG_SIZE -4
# define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE
@@ -49,6 +54,15 @@
* since it needs to fit in with the other values. By also #defining it
* we get warnings if the Kconfig value mismatches. */
#define CONFIG_SPL_BSS_START_ADDR 0x2ff80000
+#elif defined(CONFIG_MACH_SUNIV)
+#define SDRAM_OFFSET(x) 0x8##x
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
+ * since it needs to fit in with the other values. By also #defining it
+ * we get warnings if the Kconfig value mismatches.
+ */
+#define CONFIG_SPL_STACK_R_ADDR 0x81e00000
+#define CONFIG_SPL_BSS_START_ADDR 0x81f80000
#else
#define SDRAM_OFFSET(x) 0x4##x
#define CONFIG_SYS_SDRAM_BASE 0x40000000
@@ -93,13 +107,9 @@
#endif
/* mmc config */
-#ifdef CONFIG_MMC
#define CONFIG_MMC_SUNXI_SLOT 0
-#endif
#if defined(CONFIG_ENV_IS_IN_MMC)
-
-#ifdef CONFIG_ARM64
/*
* This is actually (CONFIG_ENV_OFFSET -
* (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)), but the value will be used
@@ -109,7 +119,6 @@
#endif
#define CONFIG_SYS_MMC_MAX_DEVICE 4
-#endif
/*
* Miscellaneous configurable options
@@ -124,8 +133,6 @@
#define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */
-#define CONFIG_SPL_BOARD_LOAD_IMAGE
-
/*
* We cannot use expressions here, because expressions won't be evaluated in
* autoconf.mk.
@@ -186,13 +193,40 @@
#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(FE00000))
#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FF00000))
+#elif defined(CONFIG_MACH_SUN8I_V3S)
+/*
+ * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
+ * 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
+ * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
+ */
+#define BOOTM_SIZE __stringify(0x2e00000)
+#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000))
+#define FDT_ADDR_R __stringify(SDRAM_OFFSET(1800000))
+#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1900000))
+#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000))
+#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
+#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1C00000))
+
+#elif defined(CONFIG_MACH_SUNIV)
+/*
+ * 32M RAM minus 1MB heap + 8MB for u-boot, stack, fb, etc.
+ * 8M uncompressed kernel, 4M compressed kernel, 512K fdt,
+ * 512K script, 512K pxe and the ramdisk at the end.
+ */
+#define BOOTM_SIZE __stringify(0x1700000)
+#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0500000))
+#define FDT_ADDR_R __stringify(SDRAM_OFFSET(0C00000))
+#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(0C50000))
+#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(0D00000))
+#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(0D50000))
+#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(0D60000))
+
#else
/*
* 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
* 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
* 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
*/
-#ifndef CONFIG_MACH_SUN8I_V3S
#define BOOTM_SIZE __stringify(0xa000000)
#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000))
#define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000))
@@ -200,20 +234,6 @@
#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(3300000))
#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3400000))
-#else
-/*
- * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
- * 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
- * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
- */
-#define BOOTM_SIZE __stringify(0x2e00000)
-#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000))
-#define FDT_ADDR_R __stringify(SDRAM_OFFSET(1800000))
-#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1900000))
-#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000))
-#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
-#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1C00000))
-#endif
#endif
#define MEM_LAYOUT_ENV_SETTINGS \
diff --git a/include/dt-bindings/clock/suniv-ccu-f1c100s.h b/include/dt-bindings/clock/suniv-ccu-f1c100s.h
new file mode 100644
index 00000000000..f5ac155c9c7
--- /dev/null
+++ b/include/dt-bindings/clock/suniv-ccu-f1c100s.h
@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ *
+ * Copyright (c) 2018 Icenowy Zheng <[email protected]>
+ *
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUNIV_F1C100S_H_
+#define _DT_BINDINGS_CLK_SUNIV_F1C100S_H_
+
+#define CLK_CPU 11
+
+#define CLK_BUS_DMA 14
+#define CLK_BUS_MMC0 15
+#define CLK_BUS_MMC1 16
+#define CLK_BUS_DRAM 17
+#define CLK_BUS_SPI0 18
+#define CLK_BUS_SPI1 19
+#define CLK_BUS_OTG 20
+#define CLK_BUS_VE 21
+#define CLK_BUS_LCD 22
+#define CLK_BUS_DEINTERLACE 23
+#define CLK_BUS_CSI 24
+#define CLK_BUS_TVD 25
+#define CLK_BUS_TVE 26
+#define CLK_BUS_DE_BE 27
+#define CLK_BUS_DE_FE 28
+#define CLK_BUS_CODEC 29
+#define CLK_BUS_SPDIF 30
+#define CLK_BUS_IR 31
+#define CLK_BUS_RSB 32
+#define CLK_BUS_I2S0 33
+#define CLK_BUS_I2C0 34
+#define CLK_BUS_I2C1 35
+#define CLK_BUS_I2C2 36
+#define CLK_BUS_PIO 37
+#define CLK_BUS_UART0 38
+#define CLK_BUS_UART1 39
+#define CLK_BUS_UART2 40
+
+#define CLK_MMC0 41
+#define CLK_MMC0_SAMPLE 42
+#define CLK_MMC0_OUTPUT 43
+#define CLK_MMC1 44
+#define CLK_MMC1_SAMPLE 45
+#define CLK_MMC1_OUTPUT 46
+#define CLK_I2S 47
+#define CLK_SPDIF 48
+
+#define CLK_USB_PHY0 49
+
+#define CLK_DRAM_VE 50
+#define CLK_DRAM_CSI 51
+#define CLK_DRAM_DEINTERLACE 52
+#define CLK_DRAM_TVD 53
+#define CLK_DRAM_DE_FE 54
+#define CLK_DRAM_DE_BE 55
+
+#define CLK_DE_BE 56
+#define CLK_DE_FE 57
+#define CLK_TCON 58
+#define CLK_DEINTERLACE 59
+#define CLK_TVE2_CLK 60
+#define CLK_TVE1_CLK 61
+#define CLK_TVD 62
+#define CLK_CSI 63
+#define CLK_VE 64
+#define CLK_CODEC 65
+#define CLK_AVS 66
+
+#endif
diff --git a/include/dt-bindings/reset/suniv-ccu-f1c100s.h b/include/dt-bindings/reset/suniv-ccu-f1c100s.h
new file mode 100644
index 00000000000..6a4b4385fe5
--- /dev/null
+++ b/include/dt-bindings/reset/suniv-ccu-f1c100s.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ *
+ * Copyright (C) 2018 Icenowy Zheng <[email protected]>
+ *
+ */
+
+#ifndef _DT_BINDINGS_RST_SUNIV_F1C100S_H_
+#define _DT_BINDINGS_RST_SUNIV_F1C100S_H_
+
+#define RST_USB_PHY0 0
+#define RST_BUS_DMA 1
+#define RST_BUS_MMC0 2
+#define RST_BUS_MMC1 3
+#define RST_BUS_DRAM 4
+#define RST_BUS_SPI0 5
+#define RST_BUS_SPI1 6
+#define RST_BUS_OTG 7
+#define RST_BUS_VE 8
+#define RST_BUS_LCD 9
+#define RST_BUS_DEINTERLACE 10
+#define RST_BUS_CSI 11
+#define RST_BUS_TVD 12
+#define RST_BUS_TVE 13
+#define RST_BUS_DE_BE 14
+#define RST_BUS_DE_FE 15
+#define RST_BUS_CODEC 16
+#define RST_BUS_SPDIF 17
+#define RST_BUS_IR 18
+#define RST_BUS_RSB 19
+#define RST_BUS_I2S0 20
+#define RST_BUS_I2C0 21
+#define RST_BUS_I2C1 22
+#define RST_BUS_I2C2 23
+#define RST_BUS_UART0 24
+#define RST_BUS_UART1 25
+#define RST_BUS_UART2 26
+
+#endif /* _DT_BINDINGS_RST_SUNIV_F1C100S_H_ */