diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-generic/gpio.h | 31 |
1 files changed, 25 insertions, 6 deletions
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index 4f8d1938da9..7d1e19ad531 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -128,6 +128,12 @@ struct gpio_desc { #define GPIOD_PULL_UP BIT(7) /* GPIO has pull-up enabled */ #define GPIOD_PULL_DOWN BIT(8) /* GPIO has pull-down enabled */ +/* Flags for updating the above */ +#define GPIOD_MASK_DIR (GPIOD_IS_OUT | GPIOD_IS_IN | \ + GPIOD_IS_OUT_ACTIVE) +#define GPIOD_MASK_DSTYPE (GPIOD_OPEN_DRAIN | GPIOD_OPEN_SOURCE) +#define GPIOD_MASK_PULL (GPIOD_PULL_UP | GPIOD_PULL_DOWN) + uint offset; /* GPIO offset within the device */ /* * We could consider adding the GPIO label in here. Possibly we could @@ -135,12 +141,6 @@ struct gpio_desc { */ }; -/* helper to compute the value of the gpio output */ -#define GPIOD_FLAGS_OUTPUT_MASK (GPIOD_ACTIVE_LOW | GPIOD_IS_OUT_ACTIVE) -#define GPIOD_FLAGS_OUTPUT(flags) \ - (((((flags) & GPIOD_FLAGS_OUTPUT_MASK) == GPIOD_IS_OUT_ACTIVE) || \ - (((flags) & GPIOD_FLAGS_OUTPUT_MASK) == GPIOD_ACTIVE_LOW))) - /** * dm_gpio_is_valid() - Check if a GPIO is valid * @@ -669,6 +669,25 @@ int dm_gpio_set_value(const struct gpio_desc *desc, int value); int dm_gpio_set_dir(struct gpio_desc *desc); /** + * dm_gpio_clrset_flags() - Update flags + * + * This updates the flags as directled. Note that desc->flags is updated by this + * function on success. If any changes cannot be made, best efforts are made. + * + * By use of @clr and @set any of flags can be individually updated, or left + * alone + * + * @desc: GPIO description containing device, offset and flags, + * previously returned by gpio_request_by_name() + * @clr: Flags to clear (GPIOD_...) + * @set: Flags to set (GPIOD_...) + * @return 0 if OK, -EINVAL if the flags had obvious conflicts, + * -ERECALLCONFLICT if there was a non-obvious hardware conflict when attempting + * to set the flags + */ +int dm_gpio_clrset_flags(struct gpio_desc *desc, ulong clr, ulong set); + +/** * dm_gpio_set_dir_flags() - Set direction using description and added flags * * This sets up the direction according to the provided flags and the GPIO |