6 files changed, 0 insertions, 59 deletions
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index aa31f3b05a0..266b77fbf68 100644
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -37,20 +37,4 @@
 
 /* CPSW Ethernet */
 
-/*
- * Default to using SPI for environment, etc.
- * 0x000000 - 0x040000 : QSPI.SPL (256KiB)
- * 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
- * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
- * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
- * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB)
- * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB)
- * 0x9E0000 - 0x2000000 : USERLAND
- */
-#define CFG_SYS_SPI_KERNEL_OFFS      0x1E0000
-#define CFG_SYS_SPI_ARGS_OFFS        0x140000
-#define CFG_SYS_SPI_ARGS_SIZE        0x80000
-
-/* SPI SPL */
-
 #endif /* __CONFIG_AM57XX_EVM_H */
diff --git a/include/configs/display5.h b/include/configs/display5.h
index 98b1e5af2c0..19d71d6066f 100644
--- a/include/configs/display5.h
+++ b/include/configs/display5.h
@@ -29,11 +29,6 @@
  * 0x1F00000 - 0x2000000 : SPI.factory  (1MiB)
  */
 
-/* Below values are "dummy" - only to avoid build break */
-#define CFG_SYS_SPI_KERNEL_OFFS      0x150000
-#define CFG_SYS_SPI_ARGS_OFFS        0x140000
-#define CFG_SYS_SPI_ARGS_SIZE        0x10000
-
 #define CFG_MXC_UART_BASE		UART5_BASE
 
 /* MMC Configs */
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 96dcd731cb6..3c960ca2ce2 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -47,22 +47,6 @@
 
 #include <configs/ti_omap5_common.h>
 
-/*
- * Default to using SPI for environment, etc.
- * 0x000000 - 0x040000 : QSPI.SPL (256KiB)
- * 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
- * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
- * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
- * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB)
- * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB)
- * 0x9E0000 - 0x2000000 : USERLAND
- */
-#define CFG_SYS_SPI_KERNEL_OFFS	0x1E0000
-#define CFG_SYS_SPI_ARGS_OFFS	0x140000
-#define CFG_SYS_SPI_ARGS_SIZE	0x80000
-
-/* SPI SPL */
-
 /* NAND support */
 #ifdef CONFIG_MTD_RAW_NAND
 /* NAND: device related configs */
diff --git a/include/configs/xea.h b/include/configs/xea.h
index 00d62748733..21454d13d21 100644
--- a/include/configs/xea.h
+++ b/include/configs/xea.h
@@ -12,14 +12,6 @@
 #ifndef __CONFIGS_XEA_H__
 #define __CONFIGS_XEA_H__
 
-#include <linux/sizes.h>
-
-/* SPL */
-
-#define CFG_SYS_SPI_KERNEL_OFFS	SZ_1M
-#define CFG_SYS_SPI_ARGS_OFFS	SZ_512K
-#define CFG_SYS_SPI_ARGS_SIZE	SZ_32K
-
 /* Memory configuration */
 #define PHYS_SDRAM_1			0x40000000	/* Base address */
 #define PHYS_SDRAM_1_SIZE		0x10000000	/* Max 256 MB RAM */
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 13941ba3589..ec78f2ee8ed 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -194,12 +194,6 @@
 	"dfu_bufsiz=0x1000\0"
 #endif
 
-#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT)
-# define CFG_SYS_SPI_KERNEL_OFFS	0x80000
-# define CFG_SYS_SPI_ARGS_OFFS	0xa0000
-# define CFG_SYS_SPI_ARGS_SIZE	0xa0000
-#endif
-
 #ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
 # error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
 #endif
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 37c77aa1611..93ae5891a07 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -191,14 +191,6 @@
 
 /* Not using MMC raw mode - just for compilation purpose */
 
-/* qspi mode is working fine */
-#ifdef CONFIG_ZYNQ_QSPI
-#define CFG_SYS_SPI_ARGS_OFFS	0x200000
-#define CFG_SYS_SPI_ARGS_SIZE	0x80000
-#define CFG_SYS_SPI_KERNEL_OFFS	(CFG_SYS_SPI_ARGS_OFFS + \
-					CFG_SYS_SPI_ARGS_SIZE)
-#endif
-
 /* SP location before relocation, must use scratch RAM */
 
 /* 3 * 64kB blocks of OCM - one is on the top because of bootrom */