summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-02-28board: rockchip: Add Radxa Compute Module 3 IO BoardJagan Teki
Radxa Compute Module 3(CM3) IO board an application board from Radxa and is compatible with Raspberry Pi CM4 IO form factor. Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Add support for Radxa CM3 IO Board defconfig and -u-boot.dtsi Reviewed-by: Kever Yang <[email protected]> Signed-off-by: Jagan Teki <[email protected]>
2023-02-28arm64: dts: rockchip: rk3566: Add Radxa Compute Module 3 IOJagan Teki
Radxa Compute Module 3(CM3) IO board an application board from Radxa and is compatible with Raspberry Pi CM4 IO form factor. Specification: - 1x HDMI, - 2x MIPI DSI - 2x MIPI CSI2 - 1x eDP - 1x PCIe card - 2x SATA - 2x USB 2.0 Host - 1x USB 3.0 - 1x USB 2.0 OTG - Phone jack - microSD slot - 40-pin GPIO expansion header - 12V DC Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. linux-next commit for the same, commit <8f19828844f2> ("arm64: dts: rockchip: Fix compatible for Radxa CM3") Add support for Radxa CM3 IO Board. Co-developed-by: FUKAUMI Naoki <[email protected]> Signed-off-by: FUKAUMI Naoki <[email protected]> Co-developed-by: Manoj Sai <[email protected]> Signed-off-by: Manoj Sai <[email protected]> Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28arm64: dts: rockchip: rk3566: Add Radxa Compute Module 3Jagan Teki
Radxa Compute Module 3(CM3) is one of the modules from a series System On Module based on the Radxa ROCK 3 series and is compatible with Raspberry Pi CM4 pinout and form factor. Specification: - Rockchip RK3566 - up to 8GB LPDDR4 - up to 128GB high performance eMMC - Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless, BT 5.0, BLE with onboard and external antenna. - Gigabit Ethernet PHY Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Since Radxa CM3 is compatible with Raspberry Pi CM4 pinout so it is possible to mount Radxa CM3 on top of the Rasberry Pi CM4 IO board. linux-next commit for the same, commit <8f19828844f2> ("arm64: dts: rockchip: Fix compatible for Radxa CM3") Add support for Radxa CM3. Reviewed-by: Kever Yang <[email protected]> Co-developed-by: FUKAUMI Naoki <[email protected]> Signed-off-by: FUKAUMI Naoki <[email protected]> Signed-off-by: Jagan Teki <[email protected]>
2023-02-28dt-bindings: rockchip: Sync rockchip, vop2.h from LinuxJagan Teki
Sync rockchip,vop2.h from linux-next, and the last commit is commit <604be85547ce> ("drm/rockchip: Add VOP2 driver") Reviewed-by: Kever Yang <[email protected]> Signed-off-by: Jagan Teki <[email protected]>
2023-02-28rockchip: rk3568: Move DM_RESET in arch kconfigJagan Teki
Like other rockchip SoCs, DM_RESET is useful across rk3568 platform. Select it from arch kconfig. Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28board: edgeble: Fix neural-compute-module-2 board nameJagan Teki
The board should be RV1126-NEU2 instead RV1126-ECM0. Fix the wrong name. Fixes: b8f1ca954013 ("board: rockchip: Add Edgeble Neu2 IO Board") Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28include: rk3328: Add default env for compressed kernel imagesChristopher Obbard
Add default memory addresses for kernel_comp_addr_r and kernel_comp_size to enable booting from a compressed kernel image. This area is temporarily used to decompress the kernel image on-the-fly. Signed-off-by: Christopher Obbard <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28arm64: dts: rockchip: rk3308: Add Radxa ROCK Pi S supportAkash Gajjar
Add Radxa ROCK 3 Model A support. sync rk3308-rock-pi-s.dts from Linux 6.2.0-rc7. ROCK Pi S is RK3308 based SBC from radxa.com. ROCK Pi S has a, - 256MB/512MB DDR3 RAM - SD, NAND flash (optional on board 1/2/4/8Gb) - 100MB ethernet, PoE (optional) - Onboard 802.11 b/g/n wifi + Bluetooth 4.0 Module - USB2.0 Type-A HOST x1 - USB3.0 Type-C OTG x1 - 26-pin expansion header - USB Type-C DC 5V Power Supply Linux commit commit for the same, <2e04c25b1320> ("arm64: dts: rockchip: add ROCK Pi S DTS support") Signed-off-by: Akash Gajjar <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28arm64: dts: rockchip: rk3568: Add Radxa ROCK 3 Model A board supportAkash Gajjar
Add Radxa ROCK 3 Model A support. sync rk3568-rock-3a.dts from Linux 6.2.0-rc7 Board Specifications - Rockchip RK3568 - 2/4/8GB LPDDR4 3200MT/s - eMMC socket, SD card slot - GbE LAN - PCIe 3.0/2.0 - M.2 Connector - 3.5mm Audio jack with mic - HDMI 2.0, MIPI DSI/CSI - USB 3.0 Host/OTG, USB 2.0 Host - 40-pin GPIO expansion ports - USB Type C PD 2.0, 9V/2A, 12V/2A, 15V/2A, 20V/2A Refer Linux commit <22a442e6586c> ("arm64: dts: rockchip: add basic dts for the radxa rock3 model a") Signed-off-by: Akash Gajjar <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28binman: Mark mkimage entry missing when its subnodes is missingJonas Karlman
Using the mkimage entry with the multiple-data-files prop and having a missing external blob result in an unexpected ValueError exception using the --allow-missing flag. ValueError: Filename 'missing.bin' not found in input path (...) Fix this by using _pathname that is resolved by ObtainContents for blob entries, ObtainContents also handles allow missing for external blobs. Mark mkimage entry as missing and return without running mkimage when missing entries is reported by CheckMissing. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28rockchip: mkimage: Update init size limit for RK3568Jonas Karlman
The current init size limit of 76KiB is too big to fit in the 64KiB SRAM on RK3568, sync init size limit from vendor u-boot to fix this. Set init size limit to 60KiB (-16KiB) for RK3568. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28rockchip: mkimage: Update init size limit for RK3328Jonas Karlman
Latest vendor TPL for RK3328 has grown past the current init size limit of 28KiB, sync the init size limit from vendor u-boot to fix this. Set init size limit to 30KiB (+2KiB) for RK3328. This makes it possible to use latest vendor TPL on RK3328 without getting a size limit error running the mkimage command. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28Revert "board: rockchip: Fix binman_init failure on EVB-RK3568"Jonas Karlman
An external TPL binary is now expected to be provided using ROCKCHIP_TPL when building RK3568 targets. This reverts commit 31500e7bcfaca08ab7c2879f502a6cf852410244. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28rockchip: Use an external TPL binary on RK3568Jonas Karlman
Rockchip SoCs typically use U-Boot TPL to initialize DRAM, then jumps back to BootRom to load next stage, U-Boot SPL, into DRAM. BootRom then jumps to U-Boot SPL to continue the normal boot flow. However, there is no support to initialize DRAM on RK35xx SoCs using U-Boot TPL and instead an external TPL binary must be used to generate a bootable u-boot-rockchip.bin image. Add CONFIG_ROCKCHIP_EXTERNAL_TPL to indicate that an external TPL should be used. Build U-Boot with ROCKCHIP_TPL=/path/to/ddr.bin to generate a bootable u-boot-rockchip.bin image for RK3568. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Kever Yang <[email protected]> Tested-by: Eugen Hristev <[email protected]>
2023-02-28binman: Add support for a rockchip-tpl entryJonas Karlman
The rockchip-tpl entry can be used when an external TPL binary should be used instead of the normal U-Boot TPL. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Kever Yang <[email protected]> Tested-by: Eugen Hristev <[email protected]>
2023-02-28rockchip: dts: rk3328: fix sdram paramsJonas Karlman
The rk3328 sdram driver read sdram parameters from the devicetree into a struct rk3328_sdram_params using dev_read_u32_array. After commit 5ab30c3176bf ("ram: rockchip: Update ddr pctl regs for px30") changed the size of struct ddr_pctl_regs, a member of struct rk3328_sdram_params, U-Boot TPL can no longer initialize DRAM on RK3328. Add ten u32 to the sdram parameter array in devicetree to align with this size change. This fixes DRAM initialization on RK3328. Fixes: 5ab30c3176bf ("ram: rockchip: Update ddr pctl regs for px30") Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Kever Yang <[email protected]> Reviewed-by: Jagan Teki <[email protected]> Tested-by: Jagan Teki <[email protected]> # roc-rk3328-cc
2023-02-28rockchip: sdram: add dram bank with usable memory beyond 4GBJonas Karlman
Add a second dram bank of usable memory beyond the blob of space for peripheral near 4GB. Any memory that exists beyond the 4GB mark is added to the second bank. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28rockchip: sdram: add basic support for sdram reg info version 3Jonas Karlman
Newer DRAM initialization blobs from vendor can encode sdram info in a new version 3 format. The new format makes use of more bits in sys_reg3 compared to the version 2 format. Add basic support for detecting the version 3 format and decoding the high bits used for ddrtype. This fixes decode of sdram size on my RK3568 boards that have LPDDR4X. Details on the new format was deciphered from vendor u-boot commit [1]. [1] https://github.com/rockchip-linux/u-boot/commit/c69667e0e2bf4290ab1f408fcde58b8806ac266b Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28rockchip: ringneck: fix SDRAM init failQuentin Schulz
CONFIG_RAM_PX30_DDR4 got renamed to CONFIG_RAM_ROCKCHIP_DDR4 in commit 26f92be07e2a ("ram: rockchip: Add common ddr type configs"). Since both patchsets were merged unbeknownst to the other, the conflict wasn't detected while testing each patchset individually and could only be observed after a merge to master branch. Fixes: c925be73a0a8 ("rockchip: add support for PX30 Ringneck SoM on Haikou Devkit") Cc: Quentin Schulz <[email protected]> Signed-off-by: Quentin Schulz <[email protected]> Reviewed-by: Kever Yang <[email protected]> Signed-off-by: Kever Yang <[email protected]>
2023-02-28mmc: rockchip_dw_mmc: fix DDR52 8-bit mode handlingJohn Keeping
The RK3288 TRM states that, for 8-bit DDR modes: The CLKDIV register should always be programmed with a value higher than zero (0); that is, a clock divider should always be used for 8-bit DDR mode. In Linux, the driver applies this logic for all SoCs using the driver and does not distinguish RK3288, so presumably this requirement is the same for all other Rockchip SoCs using this IP. Add the necessary code to double the clock frequency when 8-bit DDR is selected. The dw_mmc core already handles setting CLKDIV correctly given the input clock and desired bus clock. Signed-off-by: John Keeping <[email protected]> Reviewed-by: Jaehoon Chung <[email protected]>
2023-02-28arm: dts: rockchip: rk3399: nanopi-r4s: Provide smbios sysinfoChristian Kohlschütter
Provide human-readable manufacturer and product names for the FriendlyELEC NanoPi R4S. Enable CONFIG_SYSINFO and CONFIG_SYSINFO_SMBIOS by default. Signed-off-by: Christian Kohlschütter <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28ARM: dts: at91: sama7g5: fix clock id for ebi nodeMihai Sain
The PMC_MCK1 clock id for the ebi node is 23. Fixes: 746b738224ad ("ARM: dts: at91: sama7g5/sama7g5ek: align with Linux DT") Reviewed-by: Eugen Hristev <[email protected]> Signed-off-by: Mihai Sain <[email protected]>
2023-02-28configs: pm9g45: Modify to use standard ECC layoutIlko Iliev
This patch removes CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT because the board uses standard ECC layout. Signed-off-by: Ilko Iliev <[email protected]>
2023-02-28configs: pm9g45: adapt boot arguments and boot commandIlko Iliev
This patch modifies boot arguments and boot command to load 512KB DTB and 8MB Linux Kernel Signed-off-by: Ilko Iliev <[email protected]>
2023-02-28tpm: Implement tpm_auto_start() for TPMv1.2Simon Glass
Add an implementation of this, moving the common call to tpm_init() up into the common API implementation. Add a test. Reviewed-by: Ilias Apalodimas <[email protected]> Signed-off-by: Simon Glass <[email protected]> Signed-off-by: Ilias Apalodimas <[email protected]>
2023-02-28tpm: Separate out the TPM tests for v1 and v2Simon Glass
Currently there is only one test and it only works on TPM v2. Update it to work on v1.2 as well, using a new function to pick up the required TPM. Update sandbox to include both a v1.2 and v2 TPM so that this works. Split out the existing test into two pieces, one for init and one for the v2-only report_state feature. Acked-by: Ilias Apalodimas <[email protected] Signed-off-by: Simon Glass <[email protected]> Signed-off-by: Ilias Apalodimas <[email protected]>
2023-02-28test: add a test for the new tpm_auto_start() functionIlias Apalodimas
A prior patch adds a new API function for TPM2.0, which performs the full startup sequence of the TPM. Add a selftest for that. Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Ilias Apalodimas <[email protected]>
2023-02-28tpm: sandbox: Change the return code when device is already openIlias Apalodimas
All the TPM drivers as well as out TCG TIS API for a TPM2.0 device return -EBUSY if the device has already been opened. Adjust the sandbox TPM do return the same error code. Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Ilias Apalodimas <[email protected]>
2023-02-28efi_loader: use tpm_auto_start for the tpm deviceIlias Apalodimas
A previous commit is adding a new tpm startup functions which initializes the TPMv2 and performs all the needed selftests. Since the TPM selftests might be needed depending on the requested algorithm or functional module use that instead. Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Ilias Apalodimas <[email protected]>
2023-02-28tpm: add a function that performs selftest + startupIlias Apalodimas
As described in [0] if a command requires use of an untested algorithm or functional module, the TPM performs the test and then completes the command actions. Since we don't check for TPM_RC_NEEDS_TEST (which is the return code of the TPM in that case) and even if we would, it would complicate our TPM code for no apparent reason, add a wrapper function that performs both the selftest and the startup sequence of the TPM. It's worth noting that this is implemented on TPMv2.0. The code for 1.2 would look similar, but I don't have a device available to test. [0] https://trustedcomputinggroup.org/wp-content/uploads/TPM-Rev-2.0-Part-1-Architecture-01.07-2014-03-13.pdf §12.3 Self-test modes Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Ilias Apalodimas <[email protected]>
2023-02-27Merge tag 'v2023.04-rc3' into nextTom Rini
Prepare v2023.04-rc3
2023-02-27Dockerfile: Add missing "chmod" of u-boot-gen-combinedTom Rini
I had added this line locally, rebuild the image, but didn't ensure that I had committed the correct version of the patch as well. Fixes: 75b031ee4a96 ("Dockerfile: download binaries for Nokia RX-51") Signed-off-by: Tom Rini <[email protected]>
2023-02-27Prepare v2023.04-rc3v2023.04-rc3Tom Rini
Signed-off-by: Tom Rini <[email protected]>
2023-02-27mtd: nand: Show reserved block in chip.eraseMichael Trimarchi
The "nand chip.erase" command always printed as bad blocks even in the case of reserved blocks. Reserved blocks are used for storing bad block tables. The patch displays "bbt reserved" when printing reserved blocks in "nand chip.erase" command. Signed-off-by: Michael Trimarchi <[email protected]> Signed-off-by: Dario Binacchi <[email protected]>
2023-02-27mtd: spinand: Fix display of unknown raw IDPatrice Chotard
In case ID is not found in manufacturer table, the raw ID is printed using %*phN format which is not supported by lib/vsprintf.c. The information displayed doesn't reflect the raw ID return by the unknown spi-nand. Use %02x format instead, as done in spi-nor-core.c. For example, before this patch: ERROR: spi-nand: spi_nand flash@0: unknown raw ID f74ec040 after ERROR: spi-nand: spi_nand flash@0: unknown raw ID 00 c2 26 03 Fixes: 0a6d6bae0386 ("mtd: nand: Add core infrastructure to support SPI NANDs") Signed-off-by: Patrice Chotard <[email protected]> Reviewed-by: Frieder Schrempf <[email protected]> Acked-by: Michael Trimarchi <[email protected]> Signed-off-by: Dario Binacchi <[email protected]>
2023-02-27mtd: rawnand: brcmnand: fix OOB R/W with Hamming ECCÁlvaro Fernández Rojas
Hamming ECC doesn't cover the OOB data, so reading or writing OOB shall always be done without ECC enabled. This is a problem when adding JFFS2 cleanmarkers to erased blocks. If JFFS2 clenmarkers are added to the OOB with ECC enabled, OOB bytes will be changed from ff ff ff to 00 00 00, reporting incorrect ECC errors. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: Álvaro Fernández Rojas <[email protected]> Acked-by: Brian Norris <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected] [Ported to U-Boot from the Linux kernel] Signed-off-by: Linus Walleij <[email protected]> Acked-by: William Zhang <[email protected]> Signed-off-by: Dario Binacchi <[email protected]>
2023-02-27mtd: rawnand: brcmnand: support v2.1-v2.2 controllersÁlvaro Fernández Rojas
v2.1: tested on Netgear DGND3700v1 (BCM6368) v2.2: tested on Netgear DGND3700v2 (BCM6362) Signed-off-by: Álvaro Fernández Rojas <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected] [Ported to U-Boot from the Linux kernel] Signed-off-by: Linus Walleij <[email protected]> Acked-by: William Zhang <[email protected]> Signed-off-by: Dario Binacchi <[email protected]>
2023-02-27mtd: rawnand: brcmnand: rename page sizesÁlvaro Fernández Rojas
Current pages sizes apply to controllers after v3.4 Signed-off-by: Álvaro Fernández Rojas <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected] [Ported to U-Boot from the Linux kernel] Signed-off-by: Linus Walleij <[email protected]> Acked-by: William Zhang <[email protected]> Signed-off-by: Dario Binacchi <[email protected]>
2023-02-27mtd: rawnand: brcmnand: fix CS0 layoutÁlvaro Fernández Rojas
Only v3.3-v5.0 have a different CS0 layout. Controllers before v3.3 use the same layout for every CS. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: Álvaro Fernández Rojas <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected] [Ported to U-Boot from the Linux kernel] Signed-off-by: Linus Walleij <[email protected]> Reviewed-by: Michael Trimarchi <[email protected]> Acked-by: William Zhang <[email protected]> Signed-off-by: Dario Binacchi <[email protected]>
2023-02-27mtd: rawnand: brcmnand: rename v4 registersÁlvaro Fernández Rojas
These registers are also used on v3.3. Signed-off-by: Álvaro Fernández Rojas <[email protected]> Reviewed-by: Miquel Raynal <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected] [Ported to U-Boot from the Linux kernel] Signed-off-by: Linus Walleij <[email protected]> Reviewed-by: Michael Trimarchi <[email protected]> Acked-by: William Zhang <[email protected]> Signed-off-by: Dario Binacchi <[email protected]>
2023-02-27mtd: rawnand: brcmnand: correctly verify erased pagesÁlvaro Fernández Rojas
The current code checks that the whole OOB area is erased. This is a problem when JFFS2 cleanmarkers are added to the OOB, since it will fail due to the usable OOB bytes not being 0xff. Correct this by only checking that data and ECC bytes aren't 0xff. Fixes: 02b88eea9f9c ("mtd: brcmnand: Add check for erased page bitflips") Signed-off-by: Álvaro Fernández Rojas <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected] [Ported to U-Boot from the Linux kernel] Signed-off-by: Linus Walleij <[email protected]> Acked-by: William Zhang <[email protected]> Signed-off-by: Dario Binacchi <[email protected]>
2023-02-27mtd: nand: brcmnand: Add support for flash-dma v0Kamal Dasu
This change adds support for flash dma v0.0. Signed-off-by: Kamal Dasu <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> [Ported to U-Boot from the Linux kernel] Signed-off-by: Linus Walleij <[email protected]> Acked-by: William Zhang <[email protected]> Signed-off-by: Dario Binacchi <[email protected]>
2023-02-27mtd: rawnand: brcmnand: Fix ecc chunk calculation for erased page bitfipsClaire Lin
In brcmstb_nand_verify_erased_page(), the ECC chunk pointer calculation while correcting erased page bitflips is wrong, fix it. Fixes: 02b88eea9f9c ("mtd: brcmnand: Add check for erased page bitflips") Signed-off-by: Claire Lin <[email protected]> Reviewed-by: Ray Jui <[email protected]> Signed-off-by: Kamal Dasu <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> [Ported to U-Boot from the Linux kernel] Signed-off-by: Linus Walleij <[email protected]> Acked-by: William Zhang <[email protected]> Signed-off-by: Dario Binacchi <[email protected]>
2023-02-27mtd: rawnand: brcmnand: Add support for v7.3 controllerKamal Dasu
This change adds support for brcm NAND v7.3 controller. This controller uses a newer version of flash_dma engine and change mostly implements these differences. Signed-off-by: Kamal Dasu <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> [Ported to U-Boot from the Linux kernel] Signed-off-by: Linus Walleij <[email protected]> Acked-by: William Zhang <[email protected]> Signed-off-by: Dario Binacchi <[email protected]>
2023-02-27mtd: rawnand: brcmnand: Refactored code to introduce helper functionsKamal Dasu
Refactored NAND ECC and CMD address configuration code to use helper functions. Signed-off-by: Kamal Dasu <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> [Ported to U-Boot from the Linux kernel] Signed-off-by: Linus Walleij <[email protected]> Reviewed-by: Michael Trimarchi <[email protected]> Acked-by: William Zhang <[email protected]> Signed-off-by: Dario Binacchi <[email protected]>
2023-02-27mtd: nand: Mark reserved blocksAshok Reddy Soma
Reserved blocks are used for storing bad block tables. With "nand bad" command, these reserved blocks are shown as bad blocks. This is leading to confusion when compared with Linux bad blocks. Hence, display "bbt reserved" when printing reserved blocks with "nand bad" command. To acheive this, return 2 which represents reserved from nand_isbad_bbt() instead of 1 in case of reserved blocks and catch it in cmd/nand.c. "nand bad" command display's hexadecimal numbers, so add "0x" prefix. Example log will show up as below. ZynqMP> nand bad Device 0 bad blocks: 0x00400000 0x16800000 0x16c00000 0x17000000 0x3d800000 0x3e400000 0xe8400000 0xff000000 (bbt reserved) 0xff400000 (bbt reserved) 0xff800000 (bbt reserved) 0xffc00000 (bbt reserved) 0x116800000 0x116c00000 0x1ff000000 (bbt reserved) 0x1ff400000 (bbt reserved) 0x1ff800000 (bbt reserved) 0x1ffc00000 (bbt reserved) Signed-off-by: Ashok Reddy Soma <[email protected]> Reviewed-by: Michael Trimarchi <[email protected]> Acked-By: Michael Trimarchi <[email protected]> Signed-off-by: Dario Binacchi <[email protected]>
2023-02-27configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2023-02-25Merge branch '2023-02-24-include-nx51-components-in-docker-for-testing' into ↵Tom Rini
next - Merge in changes to our Dockerfile so that we build and download ahead of time all of the components required to run the nx51 test scripts. This will both speed up the specific job and address failures in Azure where the ipk files fail to download.
2023-02-24CI: Update test/nokia_rx51_test.sh to use prebuilt imagesPali Rohár
Now that the Dockerfile creates images which have the binaries we require included, have CI make symlinks for them and update the existing script to support this. Signed-off-by: Tom Rini <[email protected]> Signed-off-by: Pali Rohár <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-02-24Dockerfile: build qemu for Nokia n900Heinrich Schuchardt
Using a pre-built QEMU saves a lot of time when testing. Signed-off-by: Heinrich Schuchardt <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-07-11 16:07:09 +0000