| Age | Commit message (Collapse) | Author |
|---|
|
This file does not need <time.h> so remove it.
Signed-off-by: Tom Rini <[email protected]>
|
|
This file does not need <compiler.h> but does directly need
<linux/types.h>.
Signed-off-by: Tom Rini <[email protected]>
|
|
This file does not need <linux/mtd/mtd.h> but does directly need
<linux/types.h>.
Signed-off-by: Tom Rini <[email protected]>
|
|
This file does not need <linux/list.h> so remove it.
Signed-off-by: Tom Rini <[email protected]>
|
|
This file does not need <linux/list.h> but does directly need
<linux/types.h>.
Signed-off-by: Tom Rini <[email protected]>
|
|
This file does not need <pc.h> but does directly need
<linux/types.h>. Furthermore, arch/x86/lib/bios.c was getting <pci.h>
via <bios_emul.h> so add it there.
Signed-off-by: Tom Rini <[email protected]>
|
|
This file does not need <linux/printk.h> but does directly need
<linux/types.h>.
Signed-off-by: Tom Rini <[email protected]>
|
|
This file does not need <pci.h> but does directly need <linux/types.h>.
Signed-off-by: Tom Rini <[email protected]>
|
|
Align U-Boot image end to 8 bytes to make sure DT alignment requirement
is fulfilled. This fixes a possible failure in fdt_find_separate() in
case the U-Boot image is aligned to 4 Bytes and DT is appended at the
end at already 8 Byte aligned offset.
Link: https://source.denx.de/u-boot/u-boot/-/issues/30
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
Change the vcpumntirq in the GICv3 node from SPI to PPI.
Prevents Linux from complaining:
'[Firmware Bug]: CPU interface incapable of MMIO access'
Fixes: 6d722894fd48 "board: emulation: Add QEMU sbsa support"
Signed-off-by: Patrick Rudolph <[email protected]>
|
|
Keep spelling.txt in sync with the version from kernel v6.15.
Reported-by: Yao Zi <[email protected]>
Reviewed-by: Yao Zi <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
RB1 and RB2 have three root compatibles where the last one can't be used
to decode fdtfile name (qcm* vs qrb*). So rather just rely on the first
compatible to retrieve the SoC name.
Signed-off-by: Sumit Garg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Most device vendors put "Volume Down" button onto PMIC RESIN.
But Sony is special: see
dts/upstream/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi or [1].
They put "Volume Down" on PMIC GPIO 7 where others usually put
"Volume Up", and KEY_VOLUMEUP is inside &pon_resin.
Currently if you boot U-Boot on such Sony device, you end up
with 2 "Volume Down" buttons, and no "Volume Up", which makes
navigating menu problematic.
Support reading devicetree "linux,code" property and override
statically defined button code & label based on that.
[1] https://elixir.bootlin.com/linux/v6.15-rc3/source/arch/
arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi#L263
Signed-off-by: Alexey Minnekhanov <[email protected]>
Signed-off-by: Alexey Minnekhanov <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
As of commit dc8754e8e408 ("clk/qcom: apq8016: improve clk_enable logging")
there are now warnings in the U-Boot console on DragonBoard 410c:
apq8016_clk_enable: unknown clk id 122
apq8016_clk_enable: unknown clk id 123
apq8016_clk_enable: unknown clk id 124
apq8016_clk_enable: unknown clk id 125
This is because we don't implement enable() properly for the SDCC clocks.
Currently they are being enabled as part of set_rate().
Fix this by moving the enable calls out of the apq8016_clk_init_sdc()
function and convert them to the equivalent GATE_CLK_POLLED() definitions.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Stephan Gerhold <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Convert the usages of GATE_CLK() in clock-apq8016 to GATE_CLK_POLLED() to
make sure that we poll the status when enabling clocks:
- PRNG_AHB_CLK is a vote clock, so we poll a different register address.
- The USB clocks are simple branches, so enable/poll is the same register.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Stephan Gerhold <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
GATE_CLK() in its current state is unsafe: A simple write to the clock
enable register does not guarantee that the clock is immediately running.
Without polling the clock status, we may issue writes to registers before
the necessary clocks start running. This doesn't seem to cause issues in
U-Boot at the moment, but for example removing the CLK_OFF polling in TF-A
for the SMMU clocks on DB410c reliably triggers an exception during boot.
Make it possible to poll the branch clock status register, by adding a new
GATE_CLK_POLLED() macro that takes the extra register address. Existing
usages work just as before, without polling the clock status. Ideally all
usages should be updated to specify the correct poll address in the future.
The Qualcomm naming for these clocks is "branch" and not "gate", but let's
keep the existing naming for now to avoid confusion until all others
drivers have been converted.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Stephan Gerhold <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
The other clock enable functions in clock-qcom.c use setbits_le32() to
read/modify/write the enable registers. Use the same for qcom_gate_clk_en()
to simplify the code a bit.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Stephan Gerhold <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
This avoids having to inline it separately into every single clock driver,
when U-Boot is built with support for multiple SoCs.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Stephan Gerhold <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
The SDCC_...(n) macros in clock-apq8016.c result in the wrong addresses:
- SDCC1: SDCC_APPS_CBCR(0) = ((0 * 0x1000) + 0x41018) = 0x41018
Should be 0x42018, this is an invalid register close to the USB clocks.
- SDCC2: SDCC_APPS_CBCR(1) = ((1 * 0x1000) + 0x41018) = 0x42018
Should be 0x43018, this is the SDCC1 clock.
When we try to enable SDCC2, we actually end up enabling SDCC1. When we try
to enable SDCC1, we just issue some broken register writes.
This hasn't caused any trouble so far, because the boot firmware is keeping
both SDCC clocks running. However, if these clocks are disabled when
entering U-Boot, MMC initialization is failing.
Fix this by using the proper offset for the macros. The SDCC_CMD_RCGR() was
already correct, but change it the same way for consistency.
Fixes: 085921368b7d ("arm: Add support for Qualcomm Snapdragon family")
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Stephan Gerhold <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Fix and add support for different pmic variants pm8x50b to handle
the vbus regulator.
Signed-off-by: Rui Miguel Silva <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
When booting Linux, there is currently the following warning in the console
when using the default dragonboard410c_defconfig:
[ 0.000000] KASLR disabled due to lack of seed
Fix this by enabling DM_RNG and RNG_MSM in the defconfig to generate the
KASLR seed:
[ 0.000000] KASLR enabled
Signed-off-by: Stephan Gerhold <[email protected]>
Reviewed-by:
Reviewed-by: Sumit Garg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
At the moment, the dragonboard410c_defconfig specifies a custom
SYS_MALLOC_LEN, lower than the default for Qualcomm boards defined in
arch/arm/mach-snapdragon/Kconfig. It looks like it's too low, since
flashing larger sparse partition images using Fastboot fails with:
FAILED (remote: 'Malloc failed for: CHUNK_TYPE_RAW')
We are not really that memory-constrained for U-Boot on DB410c, so fix
this by just dropping the custom malloc size and using the default.
Signed-off-by: Stephan Gerhold <[email protected]>
Reviewed-by:
Reviewed-by: Sumit Garg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Commit 359e1d4a57e0 ("board: dragonboard410c: Use button_cmd instead of
custom code") was made in parallel with commit 8f5685d5d32f ("button:
qcom-pmic: prettify and standardise button labels"), which changed the
default button label from "vol_down" to "Volume Down". This is causing
errors in the console during boot now:
No button labelled 'vol_down'
Fix this by using the new label.
Fixes: 359e1d4a57e0 ("board: dragonboard410c: Use button_cmd instead of custom code")
Fixes: 8f5685d5d32f ("button: qcom-pmic: prettify and standardise button labels")
Signed-off-by: Stephan Gerhold <[email protected]>
Reviewed-by:
Reviewed-by: Sumit Garg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu into next
u-boot-dfu-20250602
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/26466
Usb gadget:
dwc2: Fix incorrect ULPI_UTMI_SEL bit setting
dwc2: Fix HBstLen setting for external DMA mode
dwc2: Various refactors to get the code closer to Linux
dwc2: Support reset logic for v4.20a
|
|
https://source.denx.de/u-boot/custodians/u-boot-i2c
i2c bugfixes for v2025.07-rc4
- designware_i2c: fix globally wrong return value -1 into -ETIMEDOUT
in driver, which leaded in silent errors as a timeout resulted in
an uninitialized value being returned, potentially causing
unexpected behavior.
|
|
CI: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/26455
Thanks Conor and Yao for catching this issue.
- Revert "RISC-V 32/64 images support" to fix compatibility issue
|
|
Change the return value for timeout errors in i2c-designware from 1 to
-ETIMEDOUT. Returning errors as negative values is standard practice in the
u-boot, which enhances error handling consistency across the codebase.
The current behavior can lead to silent errors when functions check for
negative return values to identify errors. For example, in
`dm_i2c_reg_read` from i2c-uclass.c, a timeout results in an uninitialized
value being returned, potentially causing unexpected behavior.
Cc: Heiko Schocher <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Wojciech Szamocki <[email protected]>
Signed-off-by: Wojciech Szamocki <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
|
|
This reverts commit 14a4792a71db3561bea065415ac1f2ac69ef32b5 as
discussed in [1].
[1] https://lists.denx.de/pipermail/u-boot/2025-May/590841.html
Signed-off-by: Mayuresh Chitale <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
This reverts commit 027a316828528da95a77d20632370b1bc2823f0b as
discussed in [1].
[1] https://lists.denx.de/pipermail/u-boot/2025-May/590841.html
Signed-off-by: Mayuresh Chitale <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
This reverts commit 37b0b22d8b7bbed6aa95b6daed06dcbf4a66f211 as
discussed in [1].
[1] https://lists.denx.de/pipermail/u-boot/2025-May/590841.html
Signed-off-by: Mayuresh Chitale <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Refactor DWC2 USB gadget driver to replace manual read-modify-write
operations with `clrsetbits_le32`, `setbits_le32`, and `clrbits_le32`
macros, which simplify the code and improve readability.
Signed-off-by: Junhui Liu <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Link: https://lore.kernel.org/r/20250126-dwc2-clrsetbits-refactor-v1-1-68c27e1b6f84@pigmoral.tech
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Updates all instances of uint8_t, uint16_t, and uint32_t to u8, u16, and
u32 respectively, ensuring consistent use of kernel-preferred types and
resolving checkpatch.pl warnings.
Signed-off-by: Kongyang Liu <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Tested-by: Peter Robinson <[email protected]>
Signed-off-by: Junhui Liu <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
This patch merges flush and reset logic for both host and gadget code
into a common set of functions, reducing duplication. It also adds support
for the updated reset logic to compatible with core version since v4.20a.
This patch mainly refers to the patch in the kernel.
link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=65dc2e725286106f99c6f6b78e3d9c52c15f3a9c
Signed-off-by: Kongyang Liu <[email protected]>
Tested-by: Peter Robinson <[email protected]>
Signed-off-by: Junhui Liu <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Some macros are shared between host and gadget code, causing duplicated
definitions. Move DWC2 macro definitions from host and gadget code into a
common header to reduce duplication.
Signed-off-by: Kongyang Liu <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Tested-by: Peter Robinson <[email protected]>
Signed-off-by: Junhui Liu <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Update the DWC2 macros to match those used in the Linux kernel, making
it easier to synchronize updates with kernel. Also removed some unused
macros to cleanup the code.
Signed-off-by: Kongyang Liu <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Tested-by: Peter Robinson <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Junhui Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Use FIELD_PREP, FIELD_GET, BIT, and GENMASK macros to standardize bit
manipulation across the DWC2 code, improving readability and
maintainability without altering functionality.
Signed-off-by: Kongyang Liu <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Tested-by: Peter Robinson <[email protected]>
Signed-off-by: Junhui Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
The loop used to calculate HBstLen for extern DMA mode does not produce
the correct result according to the datasheet [1]. Replacing that loop
with a direct calculation using LOG2 to correctly assign the burst length
in the GAHBCFG register for external DMA mode.
[1] https://rockchip.fr/RK312X%20TRM/chapter-26-usb-otg-2-0.pdf#page=24
Signed-off-by: Kongyang Liu <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Tested-by: Peter Robinson <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Junhui Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
The ULPI_UTMI_SEL bit in the DWC2 driver was set incorrectly. According
to the datasheet [1], this bit should be set to 0 for UTMI interface and 1
for ULPI interface. The existing code had this logic reversed,
causing the interface selection to be incorrect.
This commit corrects the ULPI_UTMI_SEL bit setting to match the
datasheet's description. Referencing the kernel's code [2] also confirms
this fix.
[1] https://rockchip.fr/RK312X%20TRM/chapter-26-usb-otg-2-0.pdf#page=30
[2] https://github.com/torvalds/linux/blob/v6.13-rc3/drivers/usb/dwc2/core.c#L1106
Reviewed-by: Marek Vasut <[email protected]>
Tested-by: Peter Robinson <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Junhui Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
The same registers are accessed in both the otg and gatet drivers of
dwc2, and these registers are repeatedly defined in these two parts.
Extract register definitions into a common header file to reduce
redundancy and make the code more maintainable.
Signed-off-by: Kongyang Liu <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Tested-by: Peter Robinson <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Junhui Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
If the MII interface is used, the PHY is the clock master, thus don't
set the clock rate. On Zynq-7000, this will prevent the following
error:
zynq_gem ethernet@e000b000: failed to set tx clock rate 25000000
Signed-off-by: Martin Kaistra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
The bitshift in GEM_CLK_CTRL register is five bits, not two. There are
four bits for each GEM, and one bit reserved in between.
This has caused that using more than one GEM is impossible,
additionally corrupting the GEM0's configuration, leaving GEM0
unusable as well (ie. if GEM0 and GEM1 are used, GEM1 configuration is
going to write to GEM0's registers wrong value, leaving GEM0 unusable)
Signed-off-by: Frantisek Bohacek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
FPGA configuration encounters failure when the cache is not flushed.
Add cache flushing to the memory region that holds the FPGA
configuration bitstream.
Signed-off-by: Naresh Kumar Ravulapalli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
The pcireg base is not assigned to any address, reading the
pcireg base with PS_LINKUP_OFFSET which is incorrect and
giving random values. So update the pcireg base from
devicetree so that we can read the valid PCIE link status
and PHY ready status.
Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx into next
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/26436
- Add i.MX6UL clk driver.
- Improve the .MX6UL NAND controller performance.
- Add imx6ulz BSH SMM M2B board.
- Several improvements for imx8m venice boards.
|
|
Introduce the BSH SystemMaster (SMM) M2B board. Notably, the M2B is
designed to leverage the existing device tree of its predecessor, the M2.
The primary distinction arises from memory incompatibilities with the M2.
To address this, we've implemented a configuration system that allows for
selective inclusion of the desired memory components.
Signed-off-by: Michael Trimarchi <[email protected]>
|
|
Enable the clock framework on the m2 platform.
This helps to increase the NAND controller performance.
Signed-off-by: Michael Trimarchi <[email protected]>
|
|
The clock driver allows to boost the NAND performance
controller. Make changes to let it use the new clock driver
=> time nand read ${loadaddr} kernel
NAND read: device 0 offset 0x500000, size 0x800000
8388608 bytes read: OK
time: 0.488 seconds
Signed-off-by: Michael Trimarchi <[email protected]>
|
|
Make simple the clock registration and enable and allow later
to add support for other platforms
Signed-off-by: Michael Trimarchi <[email protected]>
|
|
Add i.MX6UL clk driver for i.MX6UL CLK driver model usage
Reviewed-by: Peng Fan <[email protected]>
Reviewed-by: Christoph Niedermaier <[email protected]>
Tested-by: Christoph Niedermaier <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
|
|
The GW74xx D revision has added a M2SKT_WDIS2# GPIO which routes to the
W_DISABLE2# pin of the M.2 socket.
Add the iomux and a line name for this and rename the existing
m2_wdis# signal to m2_wdis1#.
Signed-off-by: Tim Harvey <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
