| Age | Commit message (Collapse) | Author |
|---|
|
These drivers require various headers which only exist on the ARM /
PowerPC platforms which implement the hardware. Express that requirement
in Kconfig as well.
Reviewed-by: Peng Fan <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
The nuvoton AES driver cannot build without platform specific headers
being available. Express that requirement in Kconfig as well.
Signed-off-by: Tom Rini <[email protected]>
|
|
The TI EDMA3 driver cannot build without platform specific headers being
available. Express that requirement in Kconfig as well.
Signed-off-by: Tom Rini <[email protected]>
|
|
A large number of gpio drivers cannot build without access to some platform
specific header files. Express those requirements in Kconfig as well.
Signed-off-by: Tom Rini <[email protected]>
|
|
Add the 16, 32 and 64bit versions of the non-endian {clr,set,clrset}bits
macros.
Signed-off-by: Tom Rini <[email protected]>
|
|
If phy node isn't found in ethernet-phy subnode, try to get it from
phy-handle. And when this fails, only then use Ethernet node. This
fix results in getting correct phy handle properties for the
phy node if defined.
Signed-off-by: Naresh Kumar Ravulapalli <[email protected]>
|
|
The SoC node is called 'soc@0', even on NXP branch 6.6-fslc. This fixes
the boot on i.MX8M Nano DualLite, as there is no GPU.
Signed-off-by: Alexander Stein <[email protected]>
|
|
Add the configuration that allow to reset the board from reset
cmd
Signed-off-by: Michael Trimarchi <[email protected]>
|
|
Enable the clock framework on the m2b platform as was done
in m2 variant. This helps to increase the NAND controller performance.
Signed-off-by: Michael Trimarchi <[email protected]>
|
|
With the removal of the last i.MX31 platform we can remove the rest of
the underlying architecture code as well.
Fixes: f247354708ec ("arm: Remove mx31pdk board")
Signed-off-by: Tom Rini <[email protected]>
Acked-by: Peng Fan <[email protected]>
|
|
In order for this command to build we need to compile
drivers/crypto/fsl/fsl_blob.c and this in turn includes
drivers/crypto/fsl/jr.h which references "ccsr_sec_t" which is only a
defined type for SYS_FSL_SEC_COMPAT >= 4. Express that requirement in
Kconfig as well.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
Enable DM_RNG in U-Boot to automatically populate /chosen/kaslr-seed
and enable CAAM to provide entropy.
Enable ARCH_MISC_INIT to initialize the CAAM job ring.
Signed-off-by: Emanuele Ghidoli <[email protected]>
Acked-by: Francesco Dolcini <[email protected]>
|
|
Enable DM_RNG in U-Boot to automatically populate /chosen/kaslr-seed
and enable CAAM to provide entropy.
Enable ARCH_MISC_INIT to initialize the CAAM job ring.
Signed-off-by: Emanuele Ghidoli <[email protected]>
Acked-by: Francesco Dolcini <[email protected]>
|
|
Enable DM_RNG in U-Boot to automatically populate /chosen/kaslr-seed.
Signed-off-by: Emanuele Ghidoli <[email protected]>
Acked-by: Francesco Dolcini <[email protected]>
|
|
Enable DM_RNG in U-Boot to automatically populate /chosen/kaslr-seed.
Signed-off-by: Emanuele Ghidoli <[email protected]>
Acked-by: Francesco Dolcini <[email protected]>
|
|
Enable DM_RNG in U-Boot to automatically populate /chosen/kaslr-seed
and enable CAAM to provide entropy.
Signed-off-by: Emanuele Ghidoli <[email protected]>
Acked-by: Francesco Dolcini <[email protected]>
|
|
Add fallthrough to clarify the intent.
Addresses-Coverity-ID: CID 569481: Control flow issues (MISSING_BREAK)
Signed-off-by: Heinrich Schuchardt <[email protected]>
Acked-by: Sughosh Ganu <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
We have had no platforms that make use of this since 2015, so drop it.
Signed-off-by: Tom Rini <[email protected]>
|
|
We have had no platforms that make use of this since 2021, so drop it.
Signed-off-by: Tom Rini <[email protected]>
|
|
This driver has no users after we removed the last supported platform in
2024.
Fixes: 26ed58b40f58 ("arm: Remove devkit3250 board")
Signed-off-by: Tom Rini <[email protected]>
|
|
This driver has no users after we removed the last supported platform in
2023.
Fixes: 7a3ee61f5551 ("arm: Remove omap5_uevm board")
Signed-off-by: Tom Rini <[email protected]>
|
|
pkg_resources is deprecated, use migration guide in [1] to migrate to
importlib.resources.
Keep the Python 3.6 backwards compatibility.
This also fixes the binman version test which failed for setuptools
versions that print the deprecation warning.
Change from __name__ to __package__ as with the transition from
pkg_resources to importlib_resources using __name__ results in
TypeErrors [2].
[1] https://importlib-resources.readthedocs.io/en/latest/migration.html
[2] https://github.com/python/importlib_resources/issues/60
Reviewed-by: Bryan Brattlof <[email protected]>
Signed-off-by: Yannic Moog <[email protected]>
|
|
Green Eco"
Romain Gantois <[email protected]> says:
This is version one of my series which enables Ethernet support on the BBGE
board. This requires three main changes:
- Describing the MAC<->PHY link and DP83867 PHY accurately in the device
tree
- Enabling the RGMII1 pinmux configuration
- Enabling the DP83867 driver
These changes are all applied in patch 2.
Patch 1 enables excluding the DP83867 driver from SPL. This is done to
avoid size issues when adding the DP83867 driver to the am335x-evm
defconfig.
Link: https://lore.kernel.org/r/[email protected]
|
|
Currently, the Ethernet interface of the BBGE board isn't properly
supported.
To support this interface, describe the MAC<->PHY RGMII link and the
DP83867 PHY in the BBGE device tree. Enable the DP83867 PHY driver in
U-Boot Proper and mux the relevant RGMII lines.
Signed-off-by: Romain Gantois <[email protected]>
Tested-by: Judith Mendez <[email protected]>
|
|
The DP83867 PHY driver is used by the BeagleBoneGreen Eco board, but adding
it to the am335x-evm defconfig causes SPL to overflow its size limits.
Add a separate option to enable this driver in SPL, so that it can be
enabled in U-Boot without adding unnecessary volume to SPL.
Signed-off-by: Romain Gantois <[email protected]>
Tested-by: Judith Mendez <[email protected]>
|
|
ft_board_setup_ex()"
João Paulo Gonçalves <[email protected]> says:
In some use cases, board-specific device tree changes must not be overwritten
by system fixups. Although U-Boot provides ft_board_setup_ex() for this
purpose, it is currently only used on TI Keystone. This series makes
ft_board_setup_ex() a generic option, allowing its use by other architectures
and boards.
Additionally, considering that Toradex Verdin-AM62P hardware lifetime
guarantees are based on a 105°C junction temperature (while TI AM62Px supports
up to 125°C), this series implements necessary changes within TI K3 AM62P and
Toradex board code. These changes include exporting common fixup device Tree
functions used in TI K3 for board-code access and also fixup for AM62P thermal
zones to correctly reflect the number of CPU nodes according to the SoC part
number.
Link: https://lore.kernel.org/r/20250623-am62p-fdt-fixup-trip-points-v1-0-12355eb6a72f@toradex.com
|
|
While TI AM62P supports up to 125°C junction temperature, Tj, for
industrial and automotive parts, Toradex Verdin-AM62P hardware lifetime
guarantees consider a 105°C Tj. Fixup the device tree temperature
critical trip points to match the hardware specifications. The
implementation ensures the architecture code will not overwrite the
board specific changes by enabling CONFIG_OF_BOARD_SETUP_EXTENDED for
the Verdin-AM62P.
Signed-off-by: João Paulo Gonçalves <[email protected]>
Acked-by: Francesco Dolcini <[email protected]>
|
|
TI AM62Px devices support CPU throttling based on thermal alerts.
However, the device tree assumes a 4-core configuration. Since the AM62P
also supports 2-core configurations, add a fixup to dynamically adjust
the cooling-device nodes within thermal zones based on the actual number
of CPU cores available.
Signed-off-by: João Paulo Gonçalves <[email protected]>
|
|
Avoid code duplication by making the common TI K3 device tree fixup
functions to be reusable by board-specific code.
Signed-off-by: João Paulo Gonçalves <[email protected]>
|
|
In some use cases, board-specific device tree changes must not be
overwritten by system fixups. Although U-Boot provides
ft_board_setup_ex() for this purpose, it is currently only used on TI
Keystone. Make ft_board_setup_ex() to be a generic option, allowing its
use by other architectures/boards. To maintain backward compatibility,
enable it by default on TI Keystone.
Signed-off-by: João Paulo Gonçalves <[email protected]>
|
|
scene_obj_find can return NULL but this is not checked for before
the return is dereferenced. Add a NULL check.
This issue was found by Smatch.
Also add a NULL check for str.
Signed-off-by: Andrew Goodbody <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
In the case where parse_sliteral returns an error then label_name
will not have been assigned to. In order to prevent evaluating
label_name in this case add a check for the return value of parse_sliteral.
Signed-off-by: Andrew Goodbody <[email protected]>
|
|
It was discovered that env_do_env_set() currently suffer from a long
time of a possible out-of-bound access for the argv array handling.
The BUG is present in the function env_do_env_set() line:
name = argv[1];
where the function at this point assume the argv at index 1 is always
present and can't be NULL. Aside from the fact that it's always
better to validate argv entry with the argc variable, situation where
the argv[1] is NULL is actually possible and not an error condition.
A example of where an out-of-bound access is triggered is with the
command "askenv - Press ENTER to ...".
This is a common pattern for bootmenu entry to ask the user input after
a bootmenu command succeeded.
In the context of such command, the while loop before "name = argv[1];"
parse the "-" char as an option arg and increment the argv pointer by
one (to make the rest of the logic code ignore the option argv) and
decrement argc value.
The while loop logic is correct but at the "name = argv[1];" line, the
argv have only one element left (the "-" char) and accessing argv[1]
(aka the secong element from argv pointer) cause an out-of-bound access
(making the bootloader eventually crash with strchr searching in invalid
data)
To better handle this and prevent the out-of-bound access, actually
check the argv entry left (with the use of the argc variable) and exit
early before doing any kind of array access.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Sometimes when building a platform such as imx28_btt3 we can get an
error such as:
gzip: fit-dtb.blob: warning: file timestamp out of range for gzip format
make[1]: *** [Makefile:1219: fit-dtb.blob.gz] Error 2
make[1]: *** Deleting file 'fit-dtb.blob.gz'
make: *** [Makefile:186: sub-make] Error 2
This is typically resolved by telling gzip to ignore the timestamp.
Signed-off-by: Tom Rini <[email protected]>
|
|
Commit 93b55636b09f ("tools: kwboot: Allow any baudrate on Linux") added a
tcgetattr() function to be used, instead of the libc's termios functions.
This was done to allow using the raw TCGETS2/TCSETS2 ioctls that allow to
support arbitrary baud rates.
This breaks the build for PowerPC, because that architecture does not have
a struct termios2 defined because the termios and ktermios are the same.
On PowerPC, the termios ioctl() emulates the TCGETS2/TCSETS*2 ioctls with
tcgetattr/tcsetattr using just the struct termios (that's as mentioned the
same than what is defined as struct termios2 in other architectures).
So there is no need to use the TCGETS2/TCSETS2 ioctls on that architecture
and just TCGETS/TCSETS ioctls with termios as defined by PowerPC is enough.
Fixes: 93b55636b09f ("tools: kwboot: Allow any baudrate on Linux")
Signed-off-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
The commit under fixes tag includes "pcie-cadence.h" using angle
brackets. Since the header file is not in standard include path change
it to double quotes to ensure proper inclusion and avoid build issues,
especially on older compilers.
Fixes: a4a0edc6046 ("pci_endpoint: Add TI K3 Cadence PCIe Endpoint Controller driver")
Signed-off-by: Hrushikesh Salunke <[email protected]>
Reviewed-by: Bryan Brattlof <[email protected]>
|
|
With the latest TIFS firmware, an additional virtual interrupt and
event is reserved for TIFS usage on am62x and am62ax devices.
Update the rm-cfg to reflect this new reservation.
Based on commit 87720385ab69 ("board: ti: rm-cfg: Update rm-cfg to
reflect new resource reservation").
Signed-off-by: Wadim Egorov <[email protected]>
|
|
EXT_DTB overrides the of_list_dirs that is passed to binman during
builds. This causes binman to not find the normal DTB paths and instead
it just is able to use the path for EXT_DTB only.
Add the default of_list_dirs that is used for normal binman builds to
EXT_DTB usecase as well.
Signed-off-by: Manorit Chawdhry <[email protected]>
Reviewed-by: Aniket Limaye <[email protected]>
|
|
The object= part matches against the label that the pkcs11 token uses
for that object, but in some cases, specifically with a Yubikey using
ykcs11, where the keys have been imported, the labels differ between the
private and public keys [1], making the object= matching useless. These
keys will have the same id however, so matching against that works for
both the private and public part.
[1]: https://github.com/Yubico/yubico-piv-tool/blob/master/doc/YKCS11/Functions_and_values.adoc#key-alias-per-slot-and-object-type
Signed-off-by: Tobias Olausson <[email protected]>
|
|
The variable base is unsigned so >= 0 is always true. Fix this test
so that it is actually useful. The fix prevents the code from causing
a segfault in the case where Ctrl-w is pressed on a line consisting
only of spaces.
Fixes: dcc18ce0dbaf ("cli: Implement delete-word in cread_line()")
Signed-off-by: Andrew Goodbody <[email protected]>
|
|
This series from myself largely completes an audit of extraneous include
directives in 'include/*.h' and does not go in to other directories.
Link: https://lore.kernel.org/r/[email protected]
|
|
This file does not need <config.h> nor <miiphy.h> so remove them.
Signed-off-by: Tom Rini <[email protected]>
|
|
This file does not need <asm/gpio.h> so remove it. This file does
however need <linux/types.h> so add that in. This also shows that
arch/arm/mach-rockchip/rk3399/rk3399.c and board/lg/star/star.c were
indirectly getting <asm/gpio.h> from here, so add <asm/gpio.h> to them.
Signed-off-by: Tom Rini <[email protected]>
|
|
This file does not need <part.h> so remove it. This file does however
need <stdbool.h> so add that in.
Signed-off-by: Tom Rini <[email protected]>
|
|
This file does not need <linker_lists.h> so remove it.
Signed-off-by: Tom Rini <[email protected]>
|
|
This file should not include itself, drop that.
Signed-off-by: Tom Rini <[email protected]>
|
|
This series from Ilias Apalodimas <[email protected]> largely
finishes the re-sync with the Linux Kernel v5.1 kbuild system.
Link: https://lore.kernel.org/r/[email protected]
|
|
Our last sync with the kernel was 5.1. Even that was a partial one
as some patches from 4.x kernels were already missing making the
transition to a modern kbuild infeasible.
We are so out of sync now, that tracking the patches and backporting
them one by one makes little sense and it's going to take ages.
This is an attempt to sync up Makefile[.lib/.kbuild].
Unfortunately due to sheer amount of patches this is not easy to review,
but that's what we decided during a community call.
One of the biggest changes is get rid of partial linking entirely and
build .a archives isntead of .o.
We diaviate from the kernel on that. Instead of calling a custom script
to create the archive symbol table, we call ar with rcTP (isntead of
rcSTP) since we want a resulting archive that's sauble with the linker.
The only affected platforms are PPC ones. Unfortunately I don't have any
of them around to test, but the objdump of the resulting files --
arch/powerpc/lib/built-in.[oa] looks identical.
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Since we are updating our kbuild system to 5.1, add the relevant
clang changes from upstream
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-microblaze
AMD/Xilinx changes for v2025.10-rc1
cmd:
- Introduce CMD_HELP Kconfig option
fpga:
- Fix in intel_smd_mb
mini:
- Remove simple-bus driver and description
- Disable CMD_HELP
firmware:
- Fix dependencies
- Switch to new SMC firmware format
cadence qspi:
- Fix read/write STIG mode
- Set tshsl_ns to at least one sclk_ns
sdhci:
- Call sdhci reset if wired
zynqmp-clk:
- Add support for DPLL clock source
zynqmp:
- Sync clock ID bindings with Linux
- defconfig updates
- Enable rng-seed generation
versal:
- Fix clock dependency
versal2:
- defconfig updates
- Enable sysreset
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYIAB0WIQSXAixArPbWpRanWW+rB/7wTvUR9QUCaG0Z7AAKCRCrB/7wTvUR
# 9YyCAQCseYDzYZbdh4e2g6LirVovzPv2LUNRFInYSKleegOjiwEAgQ0p9wZ0hNNj
# TpWf6sOKa/0ad3bZBtvbuV0G9WpqWAA=
# =2pbC
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 08 Jul 2025 07:15:24 AM CST
# gpg: using EDDSA key 97022C40ACF6D6A516A7596FAB07FEF04EF511F5
# gpg: Can't check signature: No public key
|
