summaryrefslogtreecommitdiff
path: root/arch/Kconfig.nxp
AgeCommit message (Collapse)Author
2025-07-17nxp: Move FSL_SEC_MON related options to arch/Kconfig.nxpTom Rini
The options related to FSL_SEC_MON are part of the chain of trust related options and should be under that menu, so move it there. Furthermore we don't need to prompt for the driver itself but do need to allow for configuration of the monitor endianess. Signed-off-by: Tom Rini <[email protected]>
2023-07-06LFU-544: Kconfig.nxp: Fixed secure boot on LS-CH2 platformsKshitiz Varshney
pimg64 image pointer is dependent on ESBC_ADDR_64BIT config, which is getting disabled, due to dependency on ESBC_HDR_LS. ESBC_HDR_LS is required for LS-CH3 platforms. So, removing the dependency on ESBC_HDR_LS. Signed-off-by: Kshitiz Varshney <[email protected]> Acked-by: Peng Fan <[email protected]> Reviewed-by: Gaurav Jain <[email protected]>
2023-06-12global: Use proper project name U-BootMichal Simek
Use proper project name in comments, Kconfig, readmes. Reviewed-by: Neil Armstrong <[email protected]> Acked-by: Ilias Apalodimas <[email protected]> Reviewed-by: Stefan Roese <[email protected]> Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/0dbdf0432405c1c38ffca55703b6737a48219e79.1684307818.git.michal.simek@amd.com
2023-01-20nxp: Finish migration of SYS_FSL_SRDS_[12] to KconfigTom Rini
As this is used on both ARM and PowerPC platforms, this needs to be listed in arch/Kconfig.nxp and match how they're currently used by select'ing them under the required PowerPC ARCH_xxx options. Signed-off-by: Tom Rini <[email protected]>
2023-01-20nxp: Finish migration of SYS_FSL_IFC_BANK_COUNT to KconfigTom Rini
As this is used on both ARM and PowerPC platforms, this needs to be asked in arch/Kconfig.nxp. Set the PowerPC defaults based on arch/powerpc/include/asm/config_mpc85xx.h and remove the default set in drivers/mtd/nand/raw/fsl_ifc_nand.c Signed-off-by: Tom Rini <[email protected]>
2023-01-11Kconfig: move NXP specific stuff into a sub-menuHeinrich Schuchardt
Having NXP specific items in the main menu is confusing. Especially the comment line *** Other functionality shared between NXP SoCs *** is simply misleading. Move all NXP stuff into a separate sub-menu. Signed-off-by: Heinrich Schuchardt <[email protected]>
2022-12-22Convert CONFIG_FLASH_SPANSION_S29WS_N et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FLASH_SPANSION_S29WS_N CONFIG_FLASH_VERIFY CONFIG_FSL_FM_10GEC_REGULAR_NOTATION CONFIG_FSL_ISBC_KEY_EXT CONFIG_FSL_TRUST_ARCH_v1 CONFIG_FSL_SDHC_V2_3 CONFIG_MAX_DSP_CPUS CONFIG_MIU_2BIT_INTERLEAVED CONFIG_SERIAL_BOOT CONFIG_SPI_BOOTING CONFIG_X86EMU_RAW_IO Signed-off-by: Tom Rini <[email protected]>
2022-12-05Convert CONFIG_SYS_PMAN et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_NOBQFMAN CONFIG_SYS_DPAA_DCE CONFIG_SYS_DPAA_FMAN CONFIG_SYS_DPAA_PME CONFIG_SYS_DPAA_RMAN CONFIG_SYS_PMAN Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-08-12Convert CONFIG_SYS_FSL_NUM_CC_PLLS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_NUM_CC_PLLS Signed-off-by: Tom Rini <[email protected]>
2022-08-04Convert CONFIG_SYS_FSL_CCSR_GUR_BE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_CCSR_GUR_BE CONFIG_SYS_FSL_CCSR_SCFG_BE CONFIG_SYS_FSL_ESDHC_BE CONFIG_SYS_FSL_IFC_BE CONFIG_SYS_FSL_PEX_LUT_BE CONFIG_SYS_FSL_CCSR_GUR_LE CONFIG_SYS_FSL_CCSR_SCFG_LE CONFIG_SYS_FSL_ESDHC_LE CONFIG_SYS_FSL_IFC_LE CONFIG_SYS_FSL_PEX_LUT_LE Signed-off-by: Tom Rini <[email protected]>
2022-07-07Convert CONFIG_SYS_FSL_CPC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_CPC CONFIG_SYS_CPC_REINIT_F Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_PCIE1 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCIE1 CONFIG_PCIE2 CONFIG_PCIE3 CONFIG_PCIE4 CONFIG_PCI1 Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_LAYERSCAPE_NS_ACCESS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_LAYERSCAPE_NS_ACCESS Signed-off-by: Tom Rini <[email protected]>
2022-07-05powerpc: Clean up CHAIN_OF_TRUST related optionsTom Rini
As things stand currently, there is only one PowerPC platform that enables the options for CHAIN_OF_TRUST. From the board header files, remove a number of never-set options. Remove board specific values from arch/powerpc/include/asm/fsl_secure_boot.h as well. Rework include/config_fsl_chain_trust.h to not abuse the CONFIG namespace for constructing CHAIN_BOOT_CMD. Migrate all of the configurable addresses to Kconfig. If any platforms are re-introduced with secure boot support, everything required should still be here, but now in Kconfig, or requires migration of an option to Kconfig. Cc: Peng Fan <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2022-07-05fsl_validate: Migrate SPL_UBOOT_KEY_HASH to KconfigTom Rini
Move setting of SPL_UBOOT_KEY_HASH to a non-NULL value to Kconfig. As part of this, change fsl_secboot_validate(...) to check that it is passed a non-empty string, rather than non-NULL. Cc: Peng Fan <[email protected]> Cc: Priyanka Jain <[email protected]> Cc: Kshitiz Varshney <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2022-07-05arch/Kconfig.nxp: Re-organize slightlyTom Rini
Make all of the CHAIN_OF_TRUST options be under a single menu and add a comment for the rest, so the resulting config file reads more clearly. Remove duplicate CHAIN_OF_TRUST options from board/congatec/common/Kconfig. Remove duplicate NXP_ESBC config questions and move to arch/Kconfig.nxp. Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_SYS_FSL_SFP_BE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_KEY_REVOCATION CONFIG_SYS_FSL_SFP_BE CONFIG_SYS_FSL_SFP_LE CONFIG_SYS_FSL_SFP_VER_3_0 CONFIG_SYS_FSL_SFP_VER_3_2 CONFIG_SYS_FSL_SFP_VER_3_4 CONFIG_SYS_FSL_SRK_LE This partly means making sure to enable SYS_FSL_ERRATUM_A007186 only for when CHAIN_OF_TRUST is enabled. Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_SYS_FSL_SEC_MON et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_SEC_MON CONFIG_SYS_FSL_SEC_MON_BE CONFIG_SYS_FSL_SEC_MON_LE Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_ESBC_HDR_LS et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ESBC_HDR_LS CONFIG_ESBC_ADDR_64BIT Signed-off-by: Tom Rini <[email protected]>
2022-07-05nxp: Rename board/freescale/common/Kconfig to arch/Kconfig.nxpTom Rini
Now that board/freescale/common/Kconfig is safe to be included once, globally, rename this to arch/Kconfig.nxp to better reflect that it contains options that are valid on multiple architectures and SoC families, and not specific to NXP reference platforms either. Cc: Stefano Babic <[email protected]> Cc: Peng Fan <[email protected]> Signed-off-by: Tom Rini <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-04-13 05:59:15 +0000