summaryrefslogtreecommitdiff
path: root/arch/arm/include
AgeCommit message (Collapse)Author
2010-07-15Merge branch 'master' of ../masterWolfgang Denk
2010-07-15ARMV7: Add basic gpmc initialization for OMAP4Steve Sakoman
This patch adds a gpmc_init function for OMAP4 and adds calls to gpmc_init for existing OMAP4 boards: panda and sdp4430 Signed-off-by: Steve Sakoman <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-07-14PXA: Add PWM2 and PWM3 regs to pxa-regs.hMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-07-14PXA: Add hardware init helper macrosMarek Vasut
This patch adds macros for the following purposes: - GPIO configuration - SDRAM configuration - Wakeup - Clock configuration - Interrupt controller configuration These macros are intended to replace numerous copies of the same code. Signed-off-by: Marek Vasut <[email protected]>
2010-07-12mvgbe: add support for orion5x GbE controllerAlbert Aribaud
Add definitions and initialization in orion5x for mvgbe. Add orion5x in mvgbe SoC includes. Signed-off-by: Albert Aribaud <[email protected]> Acked-by: Prafulla Wadaskar <[email protected]> Signed-off-by: Ben Warren <[email protected]>
2010-07-12mvgbe: support SoCs other than kirkwoodAlbert Aribaud
Rename all references to kirkwood in mvgbe symbols throughout the whole codebase. Signed-off-by: Albert Aribaud <[email protected]> Acked-by: Prafulla Wadaskar <[email protected]> Signed-off-by: Ben Warren <[email protected]>
2010-07-05ARMV7: Restructure OMAP i2c driver to allow code sharing between OMAP3 and OMAP4Steve Sakoman
This patch modifies the omap24xx driver so that it will also work with OMAP4. Signed-off-by: Steve Sakoman <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-07-05ARMV7: Restructure OMAP mmc driver to allow code sharing between OMAP3 and OMAP4Steve Sakoman
The architecture independent header is moved to drivers/mmc, and the architecture dependent headers reside in asm/arch-omap3 and asm/arch-omap4 Signed-off-by: Steve Sakoman <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-07-05ARMV7: Add basic support for TI OMAP4Steve Sakoman
This patch adds minimum support for OMAP4. Code which can be shared between OMAP3 and OMAP4 is placed in arch/arm/cpu/armv7/omap-common Signed-off-by: Aneesh V <[email protected]> Signed-off-by: Steve Sakoman <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-07-05ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7Steve Sakoman
The purpose of this patch is to prepare for adding the OMAP4 architecture, which is Cortex A9 Cortex A8 and A9 both belong to the armv7 architecture, hence the name change. The two architectures are similar enough that substantial code can be shared. Signed-off-by: Aneesh V <[email protected]> Signed-off-by: Steve Sakoman <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-07-05OMAP: mmc: add support for second and third mmc channelsSteve Sakoman
This patch adds support for the second and third mmc channels on OMAP3 processors Boards wishing to use this feature should define CONFIG_SYS_MMC_SET_DEV in the board config Tested on Overo Signed-off-by: Steve Sakoman <[email protected]> Tested-by: Philip Balister <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-06-30USB OHCI support for at91sam9g45 SoCSergey Matyukevich
Add USB OHCI support for at91sam9g45ekes/at91sam9m10g45ek boards. Note that according to errata from Atmel, OHCI is not operational on the first revision of at91sam9g45 chip. So this patch enables OHCI support for later revisions. Signed-off-by: Sergey Matyukevich <[email protected]>
2010-06-29Merge branch 'next' of git://git.denx.de/u-boot-ti into nextWolfgang Denk
2010-06-23Merge branch 'master' into nextWolfgang Denk
2010-06-22ARM: fix bug in macro __arch_ioremap.Terry Lv
Signed-off-by: Terry Lv <[email protected]> Fix commit message and code formatting. Signed-off-by: Wolfgang Denk <[email protected]>
2010-06-22DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config filesPrakash PM
Currently EMAC_MDIO_PHY_NUM is defined as 1 in emac_defs.h. Because of this, EMAC does not work on EVMs which do not have phy connected at 1. Moving the macro to board config file makes this configurable depending on where the phy is connected on the MDIO bus. This patch fixes the board reset issue observed during network access on DM365EVM. EMAC driver was assuming EMAC_MDIO_PHY_NUM as 1 but it is 0 on DM365EVM. This patch is verified on da830/omap-l137, dm365 and dm644x evms. Signed-off-by: Prakash PM <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-06-18Merge branch 'master' into nextWolfgang Denk
Conflicts: Makefile Signed-off-by: Wolfgang Denk <[email protected]>
2010-06-17Merge branch 'master' of git://git.denx.de/u-boot-marvellWolfgang Denk
2010-06-17Initial support for Marvell Orion5x SoCAlbert Aribaud
This patch adds support for the Marvell Orion5x SoC. It has no use alone, and must be followed by a patch to add Orion5x support for serial, then support for the ED Mini V2, an Orion5x-based product from LaCie. Signed-off-by: Albert Aribaud <[email protected]>
2010-06-13PXA: Add missing MDREFR bitsMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-06-13PXA: Add UP2OCR register bit definitionsMarek Vasut
This register is used on PXA to control the USB Port2 operation (USB Port2 is the host port). Signed-off-by: Marek Vasut <[email protected]>
2010-06-10TI: DaVinci: Add board specific code for da850 EVMSudhakar Rajashekhara
Provides initial support for TI OMAP-L138/DA850 SoC devices on a Logic PD EVM board. Provides: Initial boot and configuration. Support for i2c. UART support (console). Signed-off-by: Sudhakar Rajashekhara <[email protected]> Acked-by: Ben Gardiner <[email protected]> Reviewed-by: Wolfgang Denk <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-06-08AM35x: Add support for EMIF4Vaibhav Hiremath
This patch adds support for the EMIF4 interface available in the AM35x processors. Signed-off-by: Vaibhav Hiremath <[email protected]> Signed-off-by: Sanjeev Premi <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-06-08omap3: Consolidate SDRC related operationsVaibhav Hiremath
Consolidated SDRC related functions into one file - sdrc.c And also replaced sdrc_init with generic memory init function (mem_init), this generalization of omap memory setup is necessary to support the new emif4 interface introduced in AM3517. Signed-off-by: Vaibhav Hiremath <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-06-08ARM1176: TI: TNETV107X soc initial supportCyril Chemparathy
TNETV107X is a Texas Instruments SoC based on an ARM1176 core, and with a bunch on on-chip integrated peripherals. This is an initial commit with basic functionality, more commits with drivers, etc. to follow. Signed-off-by: Cyril Chemparathy <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-06-07AM35x: Add support for EMIF4Vaibhav Hiremath
This patch adds support for the EMIF4 interface available in the AM35x processors. Signed-off-by: Vaibhav Hiremath <[email protected]> Signed-off-by: Sanjeev Premi <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-06-07omap3: Consolidate SDRC related operationsVaibhav Hiremath
Consolidated SDRC related functions into one file - sdrc.c And also replaced sdrc_init with generic memory init function (mem_init), this generalization of omap memory setup is necessary to support the new emif4 interface introduced in AM3517. Signed-off-by: Vaibhav Hiremath <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-06-07ARM1176: TI: TNETV107X soc initial supportCyril Chemparathy
TNETV107X is a Texas Instruments SoC based on an ARM1176 core, and with a bunch on on-chip integrated peripherals. This is an initial commit with basic functionality, more commits with drivers, etc. to follow. Signed-off-by: Cyril Chemparathy <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-05-28ARM Update mach-typesTom
Fetched from http://www.arm.linux.org.uk/developer/machines/download.php And built with repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm commit 3defb2476166445982a90c12d33f8947e75476c4 Signed-off-by: Tom <[email protected]>
2010-05-28ARM Update mach-typesTom
Fetched from http://www.arm.linux.org.uk/developer/machines/download.php And built with repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm commit 257dab81413b31b8648becfe11586b3a41e5c29a Signed-off-by: Tom <[email protected]>
2010-04-30at91: define matrix registers bit fieldsAsen Dimov
Signed-off-by: Asen Dimov <[email protected]>
2010-04-30MX31: Support 128MB RAM on QONG moduleStefano Babic
The QONG module can be downsized and delivered with 128MB instead of 256MB. The patch adds run time support for the two different memory configurations. Signed-off-by: Stefano Babic <[email protected]>
2010-04-30MX31: add pin definitions for NAND controllerStefano Babic
Add pin definitions ralted to the NAND controller to be used to set up the pin multiplexer. Signed-off-by: Stefano Babic <[email protected]>
2010-04-30MX31: add accessor function to get a gpioStefano Babic
The patch adds an accessor function to get the value of a gpio. Signed-off-by: Stefano Babic <[email protected]>
2010-04-30arm, mx27: add support for SDHC1 pin initHeiko Schocher
Signed-off-by: Heiko Schocher <[email protected]>
2010-04-30SAMSUNG: make s5p common gpio functionsMinkyu Kang
Because of s5pc1xx gpio is same as s5p seires SoC, move gpio functions to drvier/gpio/ and modify structure's name from s5pc1xx_ to s5p_. Signed-off-by: Minkyu Kang <[email protected]>
2010-04-30SAMSUNG: serial: modify name from s5pc1xx to s5pMinkyu Kang
Because of other s5p series SoC will use these serial functions, modify function's name and structure's name. Signed-off-by: Minkyu Kang <[email protected]>
2010-04-30at91: add defines for RTT and GPBRAlexander Holler
Signed-off-by: Alexander Holler <[email protected]>
2010-04-30ARM Update mach-typestrix
Fetched from http://www.arm.linux.org.uk/developer/machines/download.php And built with repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm commit 85b3cce880a19e78286570d5fd004cc3cac06f57 Signed-off-by: Tom Rix <[email protected]>
2010-04-13arm: Move cpu/$CPU to arch/arm/cpu/$CPUPeter Tyser
Signed-off-by: Peter Tyser <[email protected]>
2010-04-13Move architecture-specific includes to arch/$ARCH/include/asmPeter Tyser
This helps to clean up the include/ directory so that it only contains non-architecture-specific headers and also matches Linux's directory layout which many U-Boot developers are already familiar with. Signed-off-by: Peter Tyser <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-08-06 21:56:31 +0000