summaryrefslogtreecommitdiff
path: root/arch/microblaze/lib/Makefile
AgeCommit message (Collapse)Author
2024-04-18Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE ↵Tom Rini
enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/[email protected]/ Signed-off-by: Tom Rini <[email protected]>
2024-04-10treewide: Make arch-specific bootm code depend on BOOTMSimon Glass
Allow these functions to be compiled in when CONFIG_BOOTM is enabled, even if CONFIG_CMD_BOOTM is not. Signed-off-by: Simon Glass <[email protected]> Acked-by: Angelo Dureghello <[email protected]>
2022-09-13microblaze: add arch_print_bdinfo() implementationOvidiu Panait
Allow bdinfo command to print icache/dcache information: U-Boot-mONStR> bdinfo boot_params = 0x00000000 DRAM bank = 0x00000000 -> start = 0x04000000 -> size = 0x04000000 flashstart = 0x00000000 flashsize = 0x00000000 flashoffset = 0x00000000 baudrate = 9600 bps relocaddr = 0x07f76000 reloc off = 0x02f76000 Build = 32-bit current eth = unknown ethaddr = (not set) IP addr = <NULL> fdt_blob = 0x07fec7e0 new_fdt = 0x00000000 fdt_size = 0x00000000 lmb_dump_all: memory.cnt = 0x1 memory[0] [0x4000000-0x7ffffff], 0x04000000 bytes flags: 0 reserved.cnt = 0x1 reserved[0] [0x7e94b8c-0x7ffffff], 0x0016b474 bytes flags: 0 devicetree = embed icache = 32 KiB icache line = 4 Bytes dcache = 32 KiB dcache line = 4 Bytes Signed-off-by: Ovidiu Panait <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <[email protected]>
2015-02-09microblaze: Move architecture to use generic board initMichal Simek
Compile code with -fPIC to get GOT. Do not build SPL with fPIC because it increasing SPL size for nothing. Signed-off-by: Michal Simek <[email protected]>
2013-10-31microblaze: convert makefiles to Kbuild styleMasahiro Yamada
Signed-off-by: Masahiro Yamada <[email protected]> Cc: Michal Simek <[email protected]>
2013-07-24Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <[email protected]>
2013-07-16Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTMDirk Eibach
MAKEALL is fine for ppc4xx and mpc85xx. Run checks were done on our controlcenterd hardware. Signed-off-by: Dirk Eibach <[email protected]> Signed-off-by: Andy Fleming <[email protected]>
2013-02-04microblaze: Add muldi3.c which contains routines for _muldi3David Holsgrove
Referenced arch/blackfin/lib/muldi3.c and the linux kernel. Resolves issue seen when building u-boot for HW_MUL=0; PLATFORM_CPPFLAGS += -mxl-soft-mul PLATFORM_CPPFLAGS += -mno-xl-multiply-high which resulted in error while linking to libgcc.a without mul hw (bs / m); libgcc.a(_muldi3.o): In function `__muldi3': .... src/gcc-4.6.2/libgcc/libgcc2.c:550: undefined reference to `_GLOBAL_OFFSET_TABLE_' This link failure would not occur if we used gcc instead of ld directly, as gcc will correctly use the crt's to resolve this link. Signed-off-by: David Holsgrove <[email protected]> Signed-off-by: Michal Simek <[email protected]>
2012-07-10microblaze: Move __udelay implementationMichal Simek
Move __udelay to the timer code because of unification. And clean coding style because of checkpatch.pl. Signed-off-by: Michal Simek <[email protected]> Acked-by: Simon Glass <[email protected]>
2010-11-17Switch from archive libraries to partial linkingSebastien Carlier
Before this commit, weak symbols were not overridden by non-weak symbols found in archive libraries when linking with recent versions of binutils. As stated in the System V ABI, "the link editor does not extract archive members to resolve undefined weak symbols". This commit changes all Makefiles to use partial linking (ld -r) instead of creating library archives, which forces all symbols to participate in linking, allowing non-weak symbols to override weak symbols as intended. This approach is also used by Linux, from which the gmake function cmd_link_o_target (defined in config.mk and used in all Makefiles) is inspired. The name of each former library archive is preserved except for extensions which change from ".a" to ".o". This commit updates references accordingly where needed, in particular in some linker scripts. This commit reveals board configurations that exclude some features but include source files that depend these disabled features in the build, resulting in undefined symbols. Known such cases include: - disabling CMD_NET but not CMD_NFS; - enabling CONFIG_OF_LIBFDT but not CONFIG_QE. Signed-off-by: Sebastien Carlier <[email protected]>
2010-04-16microblaze: Consolidate cache codeMichal Simek
Merge cpu and lib cache code. Flush cache before disabling. Signed-off-by: Michal Simek <[email protected]>
2010-04-13Move lib_$ARCH directories to arch/$ARCH/libPeter Tyser
Also move lib_$ARCH/config.mk to arch/$ARCH/config.mk This change is intended to clean up the top-level directory structure and more closely mimic Linux's directory organization. Signed-off-by: Peter Tyser <[email protected]>