| Age | Commit message (Collapse) | Author |
|---|
|
This moves the SPCR and DBG2 table generation into common code, so that
they can be used by architectures other than x86.
Signed-off-by: Maximilian Brune <[email protected]>
Signed-off-by: Patrick Rudolph <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Bin Meng <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
CI: https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/22993
- New boards:
rk3566: Hardkernel ODROID-M1S
rk3588s: Hardkernel ODROID-M2
rk3588: NanoPC-T6 LTS
- Migrate to use USB_DWC3_GENERIC for rk3328
- Other board level config and dts update
|
|
Update defconfig to enable features included in pending upstream DT and
implement board_fit_config_name_match() to load correct DT for LTS and
non-LTS version of the NanoPC-T6.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The SPI flash node has been added in upstream DT, drop all props beside
bootph-* props from the SPI flash related nodes from u-boot.dtsi.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The SPI flash node has been added in upstream DT, drop all props beside
bootph-* props from the SPI flash related nodes in u-boot.dtsi.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Peter Robinson <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The SPI flash node has been added in upstream DT, drop all props beside
bootph-* props from the SPI flash related nodes in u-boot.dtsi.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Peter Robinson <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Increase rng-seed size to make Linux happy and initialize rng pool instantly.
Linux 5.19+ requires 32 bytes of entropy to initialize random pool, but u-boot
currently provides only 8 bytes.
Linux 5.18 and probably some versions before it used to require 64 bytes.
Bump min value to 64 bytes to be on a safe side.
Boot with 8 byte rng-seed (Linux 6.11):
# dmesg | grep crng
[ 12.089286] random: crng init done
Boot with 32 byte rng-seed (Linux 6.11):
# dmesg | grep crng
[ 0.000000] random: crng init done
Linux source references:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/char/random.c?h=v5.19#n551
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/char/random.c?h=v5.18#n236
Signed-off-by: Alex Shumsky <[email protected]>
Fixes: d2048bafae40 ("rockchip: board: Add board_rng_seed() for all Rockchip devices")
Reviewed-by: Dragan Simic <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/22989
- Remove unneeded USB board code and fix reset on mx6ul_14x14_evk.
- Update fastboot buffer size/address for verdin-imx8m{m|p}.
- Fix imxrt1050-evk boot and convert it to standard boot.
- Fix imx8qxp-mek and imx8qm-mek boot.
- Add support for the i.MX93 9X9 QSB board.
- Make livetree API to work on i.MX.
- Set sane default value for i.MX8M SPL_LOAD_FIT_ADDRESS.
- Deduplicate DH i.MX8MP/i.MX6 DHSOM defconfigs.
- Select default TEXT_BASE for i.MX6/i.MX7.
- Several updates for DH i.MX8MP DRC02.
|
|
Move i.MX7 TEXT_BASE/SPL_TEXT_BASE to Kconfig and common/spl/Kconfig
which is the best practice.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Add #address-cells and #size-cells to the memory node to fix warnings
Signed-off-by: Jesse Taube <[email protected]>
|
|
Two of the clocks required by the usdhc1 controller are missing from the
clock controller node. A recent change enables all the clocks in the
esdhc node, which fails as they are not defined in the clock controller.
Fixes: 76332fae769 ("mmc: fsl_esdhc_imx: Enable AHB/IPG clk with clk bulk API")
Signed-off-by: Jesse Taube <[email protected]>
Cc: Peng Fan <[email protected]>
|
|
The Hardkernel ODROID-M1S is a single-board computer based on Rockchip
RK3566 SoC. It features e.g. 4/8 GB LPDDR4 RAM, 64 GB eMMC, SD-card,
GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0.
Features tested on a ODROID-M1S 8GB rev1.0 20230906:
- SD-card boot
- eMMC boot
- Ethernet
- PCIe/NVMe
- USB gadget
- USB host
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Peter Robinson <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The Hardkernel ODROID-M2 is a single-board computer based on Rockchip
RK3588S2 SoC. It features e.g. 8/16 GB LPDDR5 RAM, 64 GB eMMC, SD-card,
GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0/Type-C.
Features tested on a ODROID-M2 16GB rev1.0 20240611:
- SD-card boot
- eMMC boot
- Ethernet
- PCIe/NVMe
- USB gadget
- USB host
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Allow to disable serial console in SPL. Weak dependency is already used
with TPL serial.
Signed-off-by: Daniel Semkowicz <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Enable the PD_VO power domain before driver access on the rk3568 SoC.
Signed-off-by: Chris Morgan <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Refactor the board detection logic (again) to make it compatible with
the upstream device-trees, and switch to OF_UPSTREAM.
Now the device boots with the device-tree for the 353P, and then
loads the correct device tree (of 10) in the later stages of SPL.
Signed-off-by: Chris Morgan <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Add dedicated getter and setter for SCLK_UART0_PMU.
This allows the driver to correctly handle UART0 clocks, and thus
it fixes the issues with UART0 not working in case DEBUG_UART is
disabled.
Unlike other Rockchip SoCs, i.e. rk3399, in the PX30 the default
clock source for UART is GPLL, instead of external oscillator.
If the DEBUG_UART is enabled, the clock source is changed in
board_debug_uart_init function to 24Mhz oscillator, which also
matches the fallback value obtained from DT node.
In case the DEBUG_UART is disabled, the UART clock source remains
default, and the DM serial driver wrongly configures the baud rate,
resulting in broken communication.
By implementing the UART clock getter/setter, the serial driver
can probe the actual configuration and corectly configure itself.
The DEBUG_UART settings now should not affect it.
The driver supports GPLL and 24M oscillator. NPLL and USBPHY480M
sources, that are managed by CRU, are not yet handled, as likely
they won't be used in real scenarios.
Signed-off-by: Lukasz Czechowski <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Basically, Radxa's boards are intended to turn LEDs on at U-Boot.
add `default-state = "on"` to u-boot.dtsi.
Signed-off-by: FUKAUMI Naoki <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
ROCK Pi 4 series and ROCK 4C+ cannot share .dtsi file because 4C+ is
different board.
add rk3399-rock-pi-4-u-boot.dtsi contents and remove dependency of it.
no functional change is intended.
Fixes: 71a95e2efd30 ("arm: dts: rockchip: add Radxa ROCK 4C+")
Suggested-by: Dragan Simic <[email protected]>
Signed-off-by: FUKAUMI Naoki <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Fix the issue introduced by commit fed064477c2c
("arm64: zynqmp: Print an error for split to lock mode switch").
The mini u-boot is hanging, because of the tcm is not initialized.
The mini u-boot is using the tcm to reserve the mmu table and
currently it is not initialized, so allowing u-boot to initialize
the tcm.
Signed-off-by: Padmarao Begari <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
Fix pointers to incorrect file name described in DT.
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/6e6017ad613d452d16ce0f7fba8a6ce32b174413.1727247725.git.michal.simek@amd.com
|
|
U-Boot code is not reading this variable that's why remove it from DT.
PL011 code is automatically using CONFIG_BAUDRATE instead.
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/3de28cc8bbf9571d24673a60809c2075fe2f44c3.1727247837.git.michal.simek@amd.com
|
|
Board is very similar to vn-p-b2197 with subset of functinality.
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/fbc6d56c4aaa33113e35a53520320f4050ed141e.1727247815.git.michal.simek@amd.com
|
|
Add "cap-mmc-hw-reset" property to the eMMC DT node to perform the
eMMC device hardware reset.
Also, add "no-sd", "no-sdio" properties to eMMC DT node to skip
unwanted sd, sdio related commands during initialization for eMMC
device as this may lead to unnecessary register dump.
Signed-off-by: Paul Alvin <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/b31554816a3378365143e9f5c266f6386af0a438.1727247785.git.michal.simek@amd.com
|
|
The RPU pytest introduced by commit e894c10c040b
("test/py: zynqmp_rpu: Add test for loading RPU apps") expects
3rd parameter as string not a number that's why extend command
to actually handle both. The issue with existing code is that
when any non number string is passed hextoul returns 0. For
backward compatibility zynqmp tcminit 0/1 can be still used but
it is recommended to use strings instead.
Signed-off-by: Padmarao Begari <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
The zynqmp tcminit crashes the U-Boot when switching from
r5-mode "split" to "lockstep" instead it should throw an error.
When cpu is enabled, the check_tcm_mode() function checks
if the previous mode is "split", switch mode is "lockstep" then
it returns the error code and the initialize_tcm() function is not
updating the global control register of the RPU instead it prints
the error message. When cpu is disabled, the check_tcm_mode()
function returns the success code for switch split to lockstep mode.
Signed-off-by: Padmarao Begari <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
Add i.MX93 9x9 Quick Start Board support.
- Two ddr scripts included w/o inline ecc feature.
- SDHC/NETWORK/I2C/UART supported
- PCA9450 supported, default over drive mode
- Documentation added.
Signed-off-by: Peng Fan <[email protected]>
|
|
Add 800MHz fracpll entry to support DDR 3200MTS.
Signed-off-by: Peng Fan <[email protected]>
|
|
serial_init runs into panic because no serial device found.
Update the device tree to include bootph-some-ram for some critial
devices needed in pre-reloc stage
Also update usdhc related properties to avoid card initialization
failure.
Fixes: 8c103c33fb1 ("dm: dts: Convert driver model tags to use new schema")
Signed-off-by: Peng Fan <[email protected]>
|
|
serial_init runs into panic because no serial device found.
Update the device tree to include bootph-some-ram for some critial
devices needed in pre-reloc tage
Fixes: 8c103c33fb1 ("dm: dts: Convert driver model tags to use new schema")
Signed-off-by: Peng Fan <[email protected]>
|
|
Add the latest 4000 MT/s DDR config generated by
Jacinto7_DDRSS_RegConfigTool Rev 0.11 for J722S , make it the
default config and update A53 default clock to 1.4 GHz matching
the default speed grade (K).
Signed-off-by: Vaishnav Achath <[email protected]>
|
|
Modifying a generic header like watchdog.h, removing not directly used
asm/ptrace.h header relies on whoever includes it to already have
included something that defines the type ulong.
Make the asm/ptrace.h header self-contained by including the proper
header.
Signed-off-by: Rasmus Villemoes <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
Manorit Chawdhry <[email protected]> says:
This series adds support for Adaptive voltage scaling on J721S2 device [0].
[0]: https://www.ti.com/lit/pdf/spruj28 (Section 5.2.4.1 AVS Support)
AVS Test for J721S2: https://gist.github.com/manorit2001/b2fd9f6764a863294d4aa0755c83c84f
Boot Test results: https://gist.github.com/manorit2001/d44e035552cb19aadeb0d928d5cb5f26
Link: https://lore.kernel.org/r/[email protected]
|
|
Also adds bootph-pre-ram property to VTM node and the pmic node.
vdd-supply is used to assign the buck regulator that the AVS driver can
use to program the proper voltage which it picked up from e-fuse.
Reviewed-by: Udit Kumar <[email protected]>
Signed-off-by: Manorit Chawdhry <[email protected]>
Reviewed-by: Aniket Limaye <[email protected]>
|
|
Adaptive Voltage Scaling (AVS) Class 0 is a procedure for lowering the
voltage on certain device power rails. Initialize AVS Class 0.
Link: https://www.ti.com/lit/pdf/spruj28 (Section 5.2.3.3.2.5 AVS-Class0)
Signed-off-by: Manorit Chawdhry <[email protected]>
Reviewed-by: Aniket Limaye <[email protected]>
|
|
MPU clock had been missing. Distinguish multiple clocks with clock-names
and add MPU clock as well.
Link: https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j721s2/clocks.html#clocks-for-a72ss0-core0-device
Signed-off-by: Manorit Chawdhry <[email protected]>
Reviewed-by: Aniket Limaye <[email protected]>
|
|
Without asm/cpu_x86.h inclusion a compiler is not happy:
arch/x86/cpu/cpu_x86.c:14:5: warning: no previous prototype for ‘cpu_x86_bind’ [-Wmissing-prototypes]
arch/x86/cpu/cpu_x86.c:29:5: warning: no previous prototype for ‘cpu_x86_get_vendor’ [-Wmissing-prototypes]
arch/x86/cpu/cpu_x86.c:41:5: warning: no previous prototype for ‘cpu_x86_get_desc’ [-Wmissing-prototypes]
arch/x86/cpu/cpu_x86.c:55:5: warning: no previous prototype for ‘cpu_x86_get_count’ [-Wmissing-prototypes]
Add missing header inclusion.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The compiler is not happy to have no prototypes for the functions that
are not defined static. Add them. This helps avoiding the compiler warnings:
arch/x86/cpu/cpu.c:197:13: warning: no previous prototype for ‘board_final_init’ [-Wmissing-prototypes]
arch/x86/cpu/cpu.c:205:13: warning: no previous prototype for ‘board_final_cleanup’ [-Wmissing-prototypes]
arch/x86/cpu/cpu.c:307:5: warning: no previous prototype for ‘reserve_arch’ [-Wmissing-prototypes]
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Some functions are not used anywhere except the same file
where they are defined. Mark them static. This helps avoiding
the compiler warnings:
arch/x86/cpu/cpu.c:343:6: warning: no previous prototype for ‘detect_coreboot_table_at’ [-Wmissing-prototypes]
arch/x86/cpu/mtrr.c:90:6: warning: no previous prototype for ‘mtrr_write_all’ [-Wmissing-prototypes]
arch/x86/cpu/i386/interrupt.c:240:6: warning: no previous prototype for ‘__do_irq’ [-Wmissing-prototypes]
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Most of the copies of the print_cpuinfo() call the default method.
Remove all of those in order to have only the default one when
no `cpu` command is compiled.
This also helps avoiding compiler warning, e.g.:
arch/x86/cpu/tangier/tangier.c:23:5: warning: no previous prototype for ‘print_cpuinfo’ [-Wmissing-prototypes]
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
At present menu items are stored according to their sequence number in
the menu. In some cases we may want to have holes in that sequence, or
not use a sequence at all.
Add a new 'value' property for menu items. This will be used for
reading and writing, if present. If there is no 'value' property, then
the normal sequence number will be used instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
This phandle was missing in the sandbox DT, add it, otherwise sandbox-i2c
driver cannot look up the emulator via i2c_emul_find(). This fixes the
following i2c_emul_find() error:
"
$ ./u-boot -Dc ""
...
i2c_emul_find() No emulators for device 'sandbox_pmic'
sandbox_pmic_write() write error to device: 0000000018c568d0 register: 0x0!
out_set_value() PMIC write failed: -5
i2c_emul_find() No emulators for device 'sandbox_pmic'
sandbox_pmic_write() write error to device: 0000000018c568d0 register: 0x0!
out_set_value() PMIC write failed: -5
...
"
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
With sandbox_spl we want to use the file-based boot in CI, so that this
flow is tested. The recent UPL change enabled booting via that method,
thus overriding the file-based boot.
Correct this by using UPL only when the --upl flag is given.
Signed-off-by: Simon Glass <[email protected]>
Fixes: 91fde8e1764 ("sandbox: Add an SPL loader for UPL")
|
|
Receiving timestamps from coreboot was unceremoniously dropped some time
ago. Add it back.
Signed-off-by: Simon Glass <[email protected]>
Fixes: 8ad01ce36f7 ("x86: Remove x86 specific GD flags as they are...")
|
|
Rather than using a special variable, get the timestamp info from the
coreboot sysinfo struct. Return a proper error as well.
Signed-off-by: Simon Glass <[email protected]>
|
|
When bootstage is used the timer can be inited before the CPU identity
is set up, resulting in the checks for the vendor not working.
Add a special call to work around this.
Signed-off-by: Simon Glass <[email protected]>
|
|
Refactor the cpu code and use it to show the CPU vendor, e.g.
AuthenticAMD or GenuineIntel
Signed-off-by: Simon Glass <[email protected]>
|
|
While a few SoCs have a unique print_cpuinfo function, a number of them
just use default_print_cpuinfo. Make default_print_cpuinfo have a weak
alias to provie print_cpuinfo.
Signed-off-by: Tom Rini <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/22796
- Switch to using upstream DT on DH i.MX8MP DHCOM PDK2/PDK3.
- Add ability to build fallback DTBOs from arch/$(ARCH)/dts.
- Remove fdt_high and initrd_high env variables from imx6-dhcom.
- Add dummy clk for imx8.
- Fix DT corruption in imx8_cpu.
- Improve DDR stability on pico-imx7d.
|
|
https://source.denx.de/u-boot/custodians/u-boot-at91
First set of u-boot-at91 fixes for the 2025.01 cycle:
This small set includes the maintainer e-mail update and a missing
header that was causing some build issues.
|
