| Age | Commit message (Collapse) | Author |
|---|
|
Add support for imx6ulz_smm_m2d, based on the M2 architecture.
Signed-off-by: Andrea Calabrese <[email protected]>
|
|
Improve support for the BSH SystemMaster (SMM) M2B board.
In particular, this patch adds the timing for the 512 MB version, and
the spi.c reflects it by removing the safe guards.
Signed-off-by: Andrea Calabrese <[email protected]>
|
|
readme was missing instructions to build M2B. Now added.
Signed-off-by: Andrea Calabrese <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Commit 86acdce2ba88 ("common: add config for board_init() call")
introduced CONFIG_BOARD_INIT option. This option can be disabled for the
boards where board_init() function is not needed. Remove empty
board_init() calls for all boards where it's possible, and disable
CONFIG_BOARD_INIT in all related defconfigs.
This cleanup was made semi-automatically using these scripts: [1].
No functional change, but the binary size for the modified boards is
reduced a bit.
[1] https://github.com/joe-skb7/uboot-convert-scripts/tree/master/remove-board-init
Signed-off-by: Sam Protsenko <[email protected]>
Tested-by: Adam Ford <[email protected]> #imx8mm_beacon
Tested-by: Bryan Brattlof <[email protected]>
Acked-by: Peng Fan <[email protected]> #NXP boards
|
|
Introduce the BSH SystemMaster (SMM) M2B board. Notably, the M2B is
designed to leverage the existing device tree of its predecessor, the M2.
The primary distinction arises from memory incompatibilities with the M2.
To address this, we've implemented a configuration system that allows for
selective inclusion of the desired memory components.
Signed-off-by: Michael Trimarchi <[email protected]>
|
|
A small delay between DRAM read access with wrong parameters and
reconfiguration is necessary.
Without a delay between DRAM read access and a following reconfiguration
this reconfiguration fails for certain DRAM chips (Nanya).
Signed-off-by: Michael Bode <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
Calibration values were calculated using the NXP tool
I.MX6ULL_DDR3_Script_Aid_V0.01.xlsx
Signed-off-by: Michael Bode <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
Calibration values were calculated using the NXP tool
I.MX6ULL_DDR3_Script_Aid_V0.01.xlsx
Signed-off-by: Wolfgang Birkner <[email protected]>
Signed-off-by: Simon Holesch <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
When using SPL on i.mx6 we frequently notice some DDR initialization
mismatches between the SPL code and the non-SPL code.
As the non-SPL code have been tested for long time and proves to be
reliable, let's configure the DDR in the exact same way as the non-SPL
case.
The idea is simple: just use the DCD table and write directly to the DDR
registers.
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
Now that the UART driver can enable the required clocks, remove
the hard-coded clock enable.
Co-developed-by: Michael Trimarchi <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
Use the new symbol to refer to any 'SPL' build, including TPL and VPL
Signed-off-by: Simon Glass <[email protected]>
|
|
Prepare v2024.07-rc5
|
|
The timing upstream was wrong corresponding to the production.
This come evident after commit b614ddb5d33
(ddr: imx: Save the FW loading if it hasn't changed). This
change fix booting from usb
Signed-off-by: Michael Trimarchi <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Reviewed-by: Michael Trimarchi <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
The address [email protected] is no longer working:
A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
[email protected]
host mx.collabora.co.uk [46.235.227.165]
SMTP error from remote mail server after RCPT TO:<[email protected]>:
550 5.1.1 <[email protected]>: Recipient address rejected:
undeliverable address: host mail.collabora.co.uk[46.235.227.172] said:
550 5.1.1 <[email protected]>: Recipient address rejected:
User unknown in local recipient table (in reply to RCPT TO command)
Remove this address from MAINTAINERS.
Signed-off-by: Hugo Villeneuve <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
|
|
1. Convert all linker symbols to char[] type so that we can get the
corresponding address by calling array name 'var' or its address
'&var'. In this way, we can avoid some potential issues[1].
2. Remove unused symbol '_TEXT_BASE'. It has been abandoned and has
not been referenced by any source code.
3. Move '__data_end' to the arch x86's own sections header as it's
only used by x86 arch.
4. Remove some duplicate declared linker symbols. Now we use the
standard header file to declare them.
[1] This patch fixes the boot failure on MIPS target. Error log:
SPL: Image overlaps SPL
Fixes: 1b8a1be1a1f1 ("spl: spl_legacy: Fix spl_end address")
Signed-off-by: Shiji Yang <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
We have a number of cases where the in-tree path of files and where
they presumably were when the first version of a patch were posted
differ slightly. Correct these to point at where the files are now.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Introduce BSH SystemMaster (SMM) M2 board family, which consists of:
imx6ulz SMM M2 and imx6ulz SMM M2 PRO boards.
Add support for imx6ulz BSH SMM M2 board:
- 128 MiB DDR3 RAM
- 256MiB Nand
- USBOTG1 peripheral - fastboot.
Signed-off-by: Michael Trimarchi <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
|
|
The way that we use this file currently means that we have to guard it
in every platform Kconfig. But it is also required in all NXP
platforms, including non-reference platforms. Make all options in it
have appropriate dependencies so that we can include it a single time
under arch/Kconfig
Signed-off-by: Tom Rini <[email protected]>
|
|
When the board was added, enabling tzc380 was left off by
mistake. The optee was tested with the following configuration
in s2pro
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 6MiB */
+ optee_core@5f800000 {
+ reg = <0x00 0x5f800000 0x00 0x600000>;
+ };
+
+ /* 2MiB */
+ optee_shm@5fe00000 {
+ reg = <0x00 0x5fe00000 0x00 0x200000>;
+ };
+ };
+
Signed-off-by: Michael Trimarchi <[email protected]>
|
|
pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.
The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.
Signed-off-by: Peng Fan <[email protected]>
Tested-by: Ariel D'Alessandro <[email protected]>
|
|
Enable DM_SERIAL for both U_Boot and the SPL. The uart4 and its pinmux
are already marked with u-boot,dm-spl but we need to move the call to
preloader_console_init() after spl_init() to avoid a board hang
as dm can't be used until after spl_init().
Remove the manual config of the UART pinmux now that it is no longer
needed.
Signed-off-by: Michael Trimarchi <[email protected]>
Cc: Tim Harvey <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Tested-by: Ariel D'Alessandro <[email protected]>
|
|
Introduce BSH SystemMaster (SMM) S2 board family, which consists of:
iMX8MN SMM S2 and iMX8MN SMM S2 PRO boards.
Add support for iMX8MN BSH SMM S2 board:
- 256 MiB DDR3 RAM
- 512MiB Nand
- USBOTG1 peripheral - fastboot.
- 100Mbit Ethernet
Add support for iMX8MN BSH SMM S2 PRO board:
- 512 MiB DDR3 RAM
- 8 GiB eMMC
- USBOTG1 peripheral - fastboot.
- 100Mbit Ethernet
Signed-off-by: Ariel D'Alessandro <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
|
