| Age | Commit message (Collapse) | Author |
|---|
|
This board still doesn't select CONFIG_DM and seems to be umaintained.
As it makes progress on modernizing several DaVinci drivers more
difficult and the maintainer has not expressed interest in updating
it, this patch proposes to remove it.
Signed-off-by: Bartosz Golaszewski <[email protected]>
Acked-by: Stefano Babic <[email protected]>
|
|
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.
In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.
This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.
Signed-off-by: Tom Rini <[email protected]>
|
|
Rather than relying on common.h to provide this include, which is going
away at some point, include it explicitly in each file.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
With d53ecad92f06 some unused interrupt related code was removed.
However all of these options are currently unused. Rather than migrate
some of these options to Kconfig we just remove the code in question.
The only related code changes here are that in some cases we use
CONFIG_STACKSIZE in non-IRQ related context. In these cases we rename
and move the value local to the code in question.
Fixes: d53ecad92f06 ("Merge branch 'master' of git://git.denx.de/u-boot-sunxi")
Signed-off-by: Tom Rini <[email protected]>
|
|
This reverts commit 70b26cd057f42c7126088b49d4285955c8a00eae.
This is not a strict revert as it is easier to fix
board/atmark-techno/armadillo-800eva/armadillo-800eva.c to now the
correct name (same value) than to revert that change too.
Signed-off-by: Tom Rini <[email protected]>
|
|
Before we can sync with the latest mach-types.h file from the Linux
Kernel we need to remove some instances of MACH_TYPE_xxx from our
sources. As these values have been removed from the canonical upstream
source we should not be using them either, so drop.
Cc: Tom Warren <[email protected]>
Cc: Lucas Stach <[email protected]>
Cc: Luka Perkov <[email protected]>
Cc: Stephen Warren <[email protected]>
Cc: Heiko Schocher <[email protected]>
Cc: Thomas Weber <[email protected]>
Cc: Lucile Quirion <[email protected]>
Cc: Matthias Weisser <[email protected]>
Cc: Suriyan Ramasami <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>
Cc: Bo Shen <[email protected]>
Cc: Nick Thompson <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Erik van Luijk <[email protected]>
Cc: Lokesh Vutla <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}
are specified in arch/Kconfig.
We can delete the ones in arch and board Kconfig files.
This commit can be easily reproduced by the following command:
find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e '
/config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ {
N
s/\n[[:space:]]*string//
}
'
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
Becuase the board select menu in arch/arm/Kconfig is too big,
move the Davinci board select menu to davinci/Kconfig.
Move also common settings (CONFIG_SYS_CPU="arm926ejs" and
CONFIG_SYS_SOC="davinci").
Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Cc: Heiko Schocher <[email protected]>
Cc: Sandeep Paulraj <[email protected]>
|
|
We have switched to Kconfig and the boards.cfg file is going to
be removed. We have to retrieve the board status and maintainers
information from it.
The MAINTAINERS format as in Linux Kernel would be nice
because we can crib the scripts/get_maintainer.pl script.
After some discussion, we chose to put a MAINTAINERS file under each
board directory, not the top-level one because we want to collect
relevant information for a board into a single place.
TODO:
Modify get_maintainer.pl to scan multiple MAINTAINERS files.
Signed-off-by: Masahiro Yamada <[email protected]>
Suggested-by: Tom Rini <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
This commit adds:
- arch/${ARCH}/Kconfig
provide a menu to select target boards
- board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
set CONFIG macros to the appropriate values for each board
- configs/${TARGET_BOARD}_defconfig
default setting of each board
(This commit was automatically generated by a conversion script
based on boards.cfg)
In Linux Kernel, defconfig files are located under
arch/${ARCH}/configs/ directory.
It works in Linux Kernel since ARCH is always given from the
command line for cross compile.
But in U-Boot, ARCH is not given from the command line.
Which means we cannot know ARCH until the board configuration is done.
That is why all the "*_defconfig" files should be gathered into a
single directory ./configs/.
Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
The definitions inside emif_defs.h concern davinci nand driver and
should be in it's header. So create header file for davinci nand
driver and move definitions from emif_defs.h and nand_defs.h to it.
Acked-by: Vitaly Andrianov <[email protected]>
Signed-off-by: Ivan Khoronzhuk <[email protected]>
[trini: Fixup more davinci breakage]
Signed-off-by: Tom Rini <[email protected]>
|
|
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Albert ARIBAUD <[email protected]>
Cc: Andreas Bießmann <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Prafulla Wadaskar <[email protected]>
Cc: Minkyu Kang <[email protected]>
Cc: Vipin Kumar <[email protected]>
Cc: Tom Warren <[email protected]>
Cc: Tom Rini <[email protected]>
|
|
to use this driver also on am335x based boards, the following
changes are made:
- struct lcd_ctrl_config lcd_cfg is now configurable
through board code
- controller base is configurable through define
DA8XX_LCD_CNTL_BASE. To be compatible with older
da8xx based boards: If this define is missing, the
DAVINCI_LCD_CNTL_BASE is used
- Determine LCD IP Version, and make the driver
working on lcd revision register values:
Version 1:
0x4C100102
Version 2:
0x4F200800
0x4F201000
Signed-off-by: Heiko Schocher <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Anatolij Gustschin <[email protected]>
Cc: Tom Rini <[email protected]>
Acked-by: Tom Rini <[email protected]>
|
|
the da8xx-fb driver works also on am335x boards. So move
the da8xx-fb.h file from arch/arm/include/asm/arch-davinci
to drivers/video, so this driver can used from am335x
based boards. Also add WVGA panel_type.
Signed-off-by: Heiko Schocher <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Anatolij Gustschin <[email protected]>
Cc: Tom Rini <[email protected]>
Acked-by: Tom Rini <[email protected]>
|
|
Signed-off-by: Wolfgang Denk <[email protected]>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <[email protected]>
|
|
Do not allow to overwrite it when video is enabled.
Signed-off-by: Bastian Ruppert <[email protected]>
CC: Tom Rini <[email protected]>
Acked-by: Stefano Babic <[email protected]>
|
|
Signed-off-by: Bastian Ruppert <[email protected]>
CC: Tom Rini <[email protected]>
Acked-by: Stefano Babic <[email protected]>
|
|
With almost all the architecture and board BOARD_LATE_INIT does not use.
CONFIG_BOARD_LATE_INIT is used instead.
This changed CONFIG_BOARD_LATE_INIT from BOARD_LATE_INIT.
Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
CC: Stefano Babic <[email protected]>
Acked-by: Stefano Babic <[email protected]>
|
|
Drop direct access to SOC's registers and use
the function of the GPIO driver for da8xx.
[Tom: Remove gpio[68]_base as it's now unused]
Signed-off-by: Stefano Babic <[email protected]>
CC: Bastian Ruppert <[email protected]>
CC: [email protected]
CC: Sandeep Paulraj <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Signed-off-by: Christian Riesch <[email protected]>
Cc: Sandeep Paulraj <[email protected]>
Cc: Heiko Schocher <[email protected]>
Cc: Sudhakar Rajashekhara <[email protected]>
Cc: Syed Mohammed Khasim <[email protected]>
Cc: Sughosh Ganu <[email protected]>
Cc: Nick Thompson <[email protected]>
Cc: Stefano Babic <[email protected]>
Acked-by: Heiko Schocher <[email protected]>
Acked-by: Nick Thompson <[email protected]>
|
|
Signed-off-by: Stefano Babic <[email protected]>
CC: Sandeep Paulraj <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>
|
|
Signed-off-by: Stefano Babic <[email protected]>
Cc: Anatolij Gustschin <[email protected]>
CC: Sandeep Paulraj <[email protected]>
Acked-by: Anatolij Gustschin <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>
|
|
Signed-off-by: Bastian Ruppert <[email protected]>
CC: Sandeep Paulraj <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>
|
|
The pin called HALTEN drives a transistor to operate the supply
voltage. After HALTEN is high, the user can release the power
switch button and the device will stay powered on.
Signed-off-by: Bastian Ruppert <[email protected]>
CC: [email protected]
CC: [email protected]
Signed-off-by: Sandeep Paulraj <[email protected]>
|
|
Use board_early_init_f so that the full boot log output can be displayed.
Signed-off-by: Stefano Babic <[email protected]>
CC: Sandeep Paulraj <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>
|
|
Signed-off-by: Stefano Babic <[email protected]>
CC: Sandeep Paulraj <[email protected]>
CC: Scott Wood <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>
|
|
console
Signed-off-by: Bastian Ruppert <[email protected]>
Signed-off-by: Stefano Babic <[email protected]>
CC: [email protected]
CC: Sandeep Paulraj <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>
|
|
Signed-off-by: Bastian Ruppert <[email protected]>
Signed-off-by: Stefano Babic <[email protected]>
CC: Sandeep Paulraj <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>
|
|
Seems people fixed their files to use libfoo.o, but didn't actually
update the creation targets to use $(cmd_link_o_target). Update the
rest of the Makefile's found with grep.
Signed-off-by: Mike Frysinger <[email protected]>
Tested-by: Simon Glass <[email protected]>
|
|
The top level Makefile does not do any recursion into subdirs when
cleaning, so these clean/distclean targets in random arch/board dirs
never get used. Punt them all.
MAKEALL didn't report any errors related to this that I could see.
Signed-off-by: Mike Frysinger <[email protected]>
|
|
This patch fixes ea20 after commit 6d8962e814c15807dd6ac5757904be2a02d187b8
where $(obj)lib$(BOARD).a was changed to $(obj)lib$(BOARD).o in almost all the
Makefiles except ea20, probably due to merge path of the changes in 2010.12.
Signed-off-by: Ben Gardiner<[email protected]>
CC: Sebastien Carlier <[email protected]>
Acked-by : Stefano Babic <[email protected]>
|
|
This board uses the OMAP-L138 SOM stacked on a
custom baseboard. It supports SPI Flash, Ethernet
with RMII.
Signed-off-by: Stefano Babic <[email protected]>
Signed-off-by: Ben Gardiner <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>
|
