| Age | Commit message (Collapse) | Author |
|---|
|
This variable is unused since we dropped the support for the Kirkwood
boards.
Signed-off-by: Holger Brunck <[email protected]>
|
|
The conversion to DM_I2C is mandatory, rework to remove
use of legacy I2C API.
Signed-off-by: Anatolij Gustschin <[email protected]>
Cc: Aleksandar Gerasimovski <[email protected]>
Cc: Holger Brunck <[email protected]>
Cc: Tomas Alvarez Vanoli <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
|
|
Similar change was done by commit b4c2c151b14b ("Kconfig: Remove all
default n/no options") and again sync is required.
default n/no doesn't need to be specified. It is default option anyway.
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Svyatoslav Ryhel <[email protected]> # tegra
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Angelo Dureghello <[email protected]>
|
|
Use proper project name in comments, Kconfig, readmes.
Reviewed-by: Neil Armstrong <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/0dbdf0432405c1c38ffca55703b6737a48219e79.1684307818.git.michal.simek@amd.com
|
|
The event framework is just that, a framework. Enabling it by itself
does nothing, so we shouldn't ask the user about it. Reword (and correct
typos) around this the option and help text. This also applies to
DM_EVENT and EVENT_DYNAMIC. Only EVENT_DEBUG and CMD_EVENT should be
visible to the user to select, when EVENT is selected.
With this, it's time to address the larger problems. When functionality
uses events, typically via EVENT_SPY, the appropriate framework then
must be select'd and NOT imply'd. As the functionality will cease to
work (and so, platforms will fail to boot) this is non-optional and
where select is appropriate. Audit the current users of EVENT_SPY to
have a more fine-grained approach to select'ing the framework where
used. Also ensure the current users of event_register and also select
EVENT_DYNAMIC.
Cc: AKASHI Takahiro <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>
Reported-by: Oliver Graute <[email protected]>
Reported-by: Francesco Dolcini <[email protected]>
Fixes: 7fe32b3442f0 ("event: Convert arch_cpu_init_dm() to use events")
Fixes: 42fdcebf859f ("event: Convert misc_init_f() to use events")
Fixes: c5ef2025579e ("dm: fix DM_EVENT dependencies")
Signed-off-by: Tom Rini <[email protected]>
Tested-by: Simon Glass <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
|
|
Enable DM_I2C and I2C mux to get rid of the usage of the legacy
i2c driver.
Signed-off-by: Holger Brunck <[email protected]>
|
|
We already removed the support for these boards.
Signed-off-by: Holger Brunck <[email protected]>
|
|
Use like the other boards a text file for the environment.
As this is the last user of keymile-common.h we can now remove this
file completely.
Signed-off-by: Holger Brunck <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_SYS_I2C_INIT_BOARD
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
These boards are out of maintenance and can be removed.
Signed-off-by: Holger Brunck <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_HUSH_INIT_VAR
Signed-off-by: Tom Rini <[email protected]>
|
|
This patch provides possibility for field fail-safe u-boot updates.
The implementation can be used on all pg-wcom boards that are booting from
parallel NOR flash.
When used in a board design, provided check_for_uboot_update function will
start new u-boot at defined location if updateduboot envvar is set to yes.
With this implementation it is expected that factory programmed u-boot
will always stay as it is, and optionally new u-boot can be safely
programmed by embedded software when the unit is rolled out on the field.
It is expected check_for_uboot_update to be called early in execution
before relocation (*_f) once SoC is basically initialized and environment
can be read, with this possibilities to not be able to fix a u-boot bug by
a u-boot update are reduced to minimum.
Signed-off-by: Aleksandar Gerasimovski <[email protected]>
Reviewed-by: Priyanka Jain <[email protected]>
|
|
This board has not been converted to CONFIG_DM_PCI by the deadline and is
also missing conversion to CONFIG_DM. Remove it.
Cc: Valentin Longchamp <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
The EXPU1 design is a new 40G capable ethernet service unit card for
Hitachi-Powergrids wired-com product lines.
The base SoC is same as for already added SELI8 card, consequently the
already added u-boot support for SELI8 is reused.
Signed-off-by: Rainer Boschung <[email protected]>
Signed-off-by: Aleksandar Gerasimovski <[email protected]>
[Fixed new line error at EOF]
Signed-off-by: Priyanka Jain <[email protected]>
|
|
The SELI8 design is a new tdm service unit card for Hitachi-Powergrids
XMC and FOX product lines.
It is based on NXP LS1021 SoC and it provides following interfaces:
- IFC interface for NOR, NAND and external FPGA's
- 1 x RGMII ETH for debug purposes
- 2 x SGMII ETH for management communication via back-plane
- 1 x uQE HDLC for management communication via back-plane
- 1 x I2C for peripheral devices
- 1 x SPI for peripheral devices
- 1 x UART for debug logging
It is foreseen that the design will be later re-used for another XMC and
FOX service cards with similar SoC requirements.
Signed-off-by: Rainer Boschung <[email protected]>
Signed-off-by: Matteo Ghidoni <[email protected]>
Signed-off-by: Aleksandar Gerasimovski <[email protected]>
Reviewed-by: Priyanka Jain <[email protected]>
|
|
Add basic support for the Hitachi Power Grids kmcent2 board, based
on the NXP QorIQ T1040 SoC.
Signed-off-by: Valentin Longchamp <[email protected]>
Signed-off-by: Rainer Boschung <[email protected]>
Signed-off-by: Niel Fourie <[email protected]>
Cc: Holger Brunck <[email protected]>
Cc: Heiko Schocher <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
[Fixed blank line at EOF errors]
Signed-off-by: Priyanka Jain <[email protected]>
|
|
Due to increasing kernel image sizes we get problems when decompressing
the kernel image. To fix this we need to change the addresses where we
load and where we extract the kernel. Also we need to adapt the address
where to load the CRAMFS image and where to load the DTB file.
While at it also harmonize all boards for PPC and ARM to have the
same values. Also we add a new variable "env_version", so that the
userspace is able to detect if this is a u-boot binary with updated
values or not.
CC: Valentin Longchamp <[email protected]>
CC: Heiko Schocher <[email protected]>
CC: Tom Rini <[email protected]>
Signed-off-by: Holger Brunck <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
[trini: Remove old values from kmp204x.h]
Signed-off-by: Tom Rini <[email protected]>
|
|
Have this symbol follow the pattern of all other such symbols.
This patch also removes a TODO from the code.
Reviewed-by: Chris Packham <[email protected]>
Signed-off-by: Trevor Woerner <[email protected]>
|
|
Add initial support for the ABB SECU board, which is an ArriaV-based
SoCFPGA system with ethernet and booting from Denali NAND.
Signed-off-by: Holger Brunck <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Simon Goldschmidt <[email protected]>
|
|
This patch only fixes a typo.
Signed-off-by: Holger Brunck <[email protected]>
CC: Stefan Roese <[email protected]>
CC: Valentin Longchamp <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
Remove this from the board header files and move it to Kconfig. Also use
the correct default address for kmtegr1.
Signed-off-by: Holger Brunck <[email protected]>
Reviewed-by: Priyanka Jain <[email protected]>
CC: Priyanka Jain <[email protected]>
CC: Valentin Longchamp <[email protected]>
|
|
To execute the conversion away from board specific header files, Kconfig
menus have been implemented for all KM boards and additionally for those
having an ARM architecture.
For the moment, the preprocessor definitions stay in the headers. The
boolean types, however, needed a modification (#define CONFIG_* 1).
The default configuration files of some boards required an update in order
to not change the currently defined values of the configurations.
Signed-off-by: Pascal Linder <[email protected]>
Signed-off-by: Holger Brunck <[email protected]>
Signed-off-by: Stefan Roese <[email protected]>
|
|
As preparation for the upcoming transferring of configurations from header
files to Kconfig, a common Kconfig file for all KM boards was created. For
the moment, it only sources the other three, more specific, Kconfig files.
Therefore, the architecture Kconfig files now include the common Kconfig
file. Also, the configuration selection for KM boards was moved from the
architecture Kconfig files to the board specific Kconfig files.
Signed-off-by: Pascal Linder <[email protected]>
Signed-off-by: Holger Brunck <[email protected]>
Cc: Mario Six <[email protected]>
Cc: Prabhakar Kushwaha <[email protected]>
Signed-off-by: Stefan Roese <[email protected]>
|
