| Age | Commit message (Collapse) | Author |
|---|
|
Add U-Boot-specific device tree overrides for the Genio 520 and 720 EVK
boards. These are needed to enable SD card support in U-Boot due to
current driver limitations. It is expected that these files will remain
after eventually converting these to CONFIG_OF_UPSTREAM, so we use
separate .u-boot.dtsi files for this.
Reviewed-by: Julien Stephan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: David Lechner <[email protected]>
|
|
Add basic defconfigs for Genio 520 and 720 EVKs.
Signed-off-by: Chris-QJ Chen <[email protected]>
Signed-off-by: Macpaul Lin <[email protected]>
Reviewed-by: Julien Stephan <[email protected]>
Reviewed-by: Macpaul Lin <[email protected]>
Link: https://patch.msgid.link/20260323-mtk-mt8391-initial-support-v3-6-19dd92f4543f@baylibre.com
Signed-off-by: David Lechner <[email protected]>
|
|
Set myself as maintainer for the following genio boards:
- mt8370-genio-510-evk
- mt8393-genio-700-evk
- mt8395-genio-1200-evk
Signed-off-by: Julien Stephan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: David Lechner <[email protected]>
|
|
mt8370_genio_510_evk_defconfig and mt8390_genio_700_evk_defconfig are
both based on MT8188, add a new mt8188.config file to share common
config.
Signed-off-by: Julien Stephan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: David Lechner <[email protected]>
|
|
Rename mt8390_evk to match the name of the device tree which is
mt8390-genio-700-evk.dts
Also update CONFIG_IDENT_STRING to be consistent.
Signed-off-by: Julien Stephan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: David Lechner <[email protected]>
|
|
Rename mt8370_evk to match the name of the device tree which is
mt8370-genio-510-evk.dts
Also update CONFIG_IDENT_STRING to be consistent.
Signed-off-by: Julien Stephan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: David Lechner <[email protected]>
|
|
Rename mt8395_evk to match the name of the device tree which is
mt8395-genio-1200-evk.dts
Also update CONFIG_IDENT_STRING to be consistent.
Signed-off-by: Julien Stephan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: David Lechner <[email protected]>
|
|
This adds support for the MT8395_EVK board with the following
features enabled/tested: Boot, UART, Watchdog and MMC.
MT8395_EVK is based on MT8195.
Signed-off-by: Julien Stephan <[email protected]>
Reviewed-by: Macpaul Lin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: David Lechner <[email protected]>
|
|
This adds support for the MT8370 EVK board with the following
features enabled/tested: Boot, UART, Watchdog and MMC.
MT8370 is based on MT8188.
Reviewed-by: Macpaul Lin <[email protected]>
Signed-off-by: Julien Stephan <[email protected]>
|
|
David Lechner <[email protected]> says:
Before adding more targets, we take a moment to clean up some some
redundant code in existing Mediatek SoC support.
The first three patches are removing no-op functions. The last patch
generalizes the mem_map code so that it can be shared between all
Mediatek ARMv8 SoCs.
Link: https://lore.kernel.org/r/20260209-mtk-mach-clean-up-duplicates-v2-0-e3b22282c74d@baylibre.com
|
|
Consolidate all mem_map definitions for MediaTek ARMv8 platforms into a
single file. The size of the DDR and MMIO regions can vary, so Kconfig
options are added to configure them by target.
Signed-off-by: David Lechner <[email protected]>
|
|
Move the mt8365_evk and mt8390_evk MAINTAINERS files to a common
MAINTAINERS file. We will be deleting the board-specific directories
soon but we need to keep the MAINTAINERS for the defconfig entries.
Signed-off-by: David Lechner <[email protected]>
|
|
Remove empty board_init() function and adjust defconfig to not require
it.
Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Macpaul Lin <[email protected]>
|
|
No functions except reserving gd in the board files. The files are
useless, remove them.
Signed-off-by: Peng Fan <[email protected]>
|
|
This adds support for the MT8390 EVK board with the following
features enabled/tested: Boot, UART, Watchdog and MMC.
MT8390 is based on MT8188.
Signed-off-by: Julien Masson <[email protected]>
Signed-off-by: Julien Stephan <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
Change mt8365_evk_defconfig to use CONFIG_OF_UPSTREAM=y and delete the
U-Boot copy of the devicetree source files for mt8365.
The upstream devicetree is identical to the U-Boot one being removed
(other than having more nodes for devices not used by U-Boot and
upstream fixed a compatible string in &scpsys, also not affecting
U-Boot).
There was one minor glitch with upstream missing a few topckgen macro
definitions, so those are added to the clock driver directly as a
workaround.
Reviewed-by: Macpaul Lin <[email protected]>
Signed-off-by: David Lechner <[email protected]>
|
|
Commit 86acdce2ba88 ("common: add config for board_init() call")
introduced CONFIG_BOARD_INIT option. This option can be disabled for the
boards where board_init() function is not needed. Remove empty
board_init() calls for all boards where it's possible, and disable
CONFIG_BOARD_INIT in all related defconfigs.
This cleanup was made semi-automatically using these scripts: [1].
No functional change, but the binary size for the modified boards is
reduced a bit.
[1] https://github.com/joe-skb7/uboot-convert-scripts/tree/master/remove-board-init
Signed-off-by: Sam Protsenko <[email protected]>
Tested-by: Adam Ford <[email protected]> #imx8mm_beacon
Tested-by: Bryan Brattlof <[email protected]>
Acked-by: Peng Fan <[email protected]> #NXP boards
|
|
This patch adds general board files based on MT7987 SoC.
MT7987 uses one mmc controller for booting from both SD and eMMC, and the
pins of mmc controller are also shared with one spi controller.
So three configs are need for these boot types:
1. mt7987_rfb_defconfig - SPI-NOR (spi2) and SPI-NAND (spi0)
2. mt7987_emmc_rfb_defconfig - eMMC + SPI-NOR (spi2)
3. mt7987_sd_rfb_defconfig - SD + SPI-NOR (spi2)
Note: spi2 also supports booting from SPI-NAND, but not the default option.
Signed-off-by: Sam Shih <[email protected]>
Signed-off-by: Weijie Gao <[email protected]>
|
|
The function board_late_init defined for mt7622 is useless now. Just
remove it.
Signed-off-by: Weijie Gao <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
This adds support for the MT8365 EVK board with the following
features enabled/tested: Boot, UART, Watchdog and MMC.
Signed-off-by: Julien Masson <[email protected]>
|
|
As part of reviewing a new platform, Daniel Schwierzeck noted that we
can have an empty Makefile in the board directory and don't need an
empty board.c file as well. Further with further cleanup in the
Makefile we can now omit the Makefile entirely. Remove a number of now
unnecessary board.c and Makefiles.
Signed-off-by: Tom Rini <[email protected]>
|
|
This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h
Move this out of the common header and include it only where needed.
Signed-off-by: Simon Glass <[email protected]>
|
|
This patch adds general board files based on MT7988 SoCs.
MT7988 uses one mmc controller for booting from both SD and eMMC,
and the pins of mmc controller booting from SD are also shared with
one of spi controllers.
So two configs are need for these boot types:
1. mt7988_rfb_defconfig - SPI-NOR, SPI-NAND and eMMC
2. mt7988_sd_rfb_defconfig - SPI-NAND and SD
Signed-off-by: Weijie Gao <[email protected]>
|
|
Now we use fdtdec_setup_mem_size_base() to get DRAM base from fdt ram node
and update gd->ram_base. CFG_SYS_SDRAM_BASE is unused and will be removed.
Also, since mt7622 always passes fdt to linux kernel, there's no need to
assign value to gd->bd->bi_boot_params.
Signed-off-by: Weijie Gao <[email protected]>
|
|
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This patch adds general board files based on MT7981 SoCs.
MT7981 uses one mmc controller for booting from both SD and eMMC, and the
pins of mmc controller are also shared with spi controller.
So three configs are need for these boot types:
1. mt7981_rfb_defconfig - SPI-NOR and SPI-NAND
2. mt7981_emmc_rfb_defconfig - eMMC only
3. mt7981_sd_rfb_defconfig - SD only
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Weijie Gao <[email protected]>
|
|
Add general board files based on MT7986 SoCs.
MT7986 uses one mmc controller for booting from both SD and eMMC.
Both MT7986A and MT7986B use the same pins for spi controller.
Configs for various boot types:
1. mt7986_rfb_defconfig - SPI-NOR and SPI-NAND for MT7986A/B
2. mt7986a_bpir3_emmc_defconfig - eMMC for MT7986A only
3. mt7986a_bpir3_sd_defconfig - SD for MT7986A only
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Weijie Gao <[email protected]>
|
|
The mt7621_rfb board supports integrated giga PHYs plus one external
giga PHYs. It also has up to 512MiB DDR3, 16MB SPI-NOR, 3 mini PCI-e x1
slots, SDXC and USB.
The mt7621_nand_rfb board is almost the same as mt7621_rfb board, but it
uses NAND flash and SDXC is not available.
Reviewed-by: Stefan Roese <[email protected]>
Reviewed-by: Daniel Schwierzeck <[email protected]>
Signed-off-by: Weijie Gao <[email protected]>
|
|
Signed-off-by: Wolfgang Denk <[email protected]>
|
|
On MediaTek boards we cannot override the SYS_BOARD / SYS_CONFIG_NAME
variables from defconfig.
This is because in board/mediatek/mtXXXX/Kconfig this value was override
by default due to the if CONFIG_TARGET_MTXXXX condition.
Merge all the Kconfigs to the mach-medatek/Kconfig.
This way:
- we only define SYS_{SOC,VENDOR} once
- all board definitions are in a single place, simplifying the build logic.
Signed-off-by: Guillaume La Roque <[email protected]>
|
|
Add the MT8183 pumpkin board support.
Signed-off-by: Fabien Parent <[email protected]>
|
|
Init USB Ether if CONFIG_USB_ETHER is enabled.
Signed-off-by: Fabien Parent <[email protected]>
|
|
More than one pumpkin board has been made with different MediaTek SoCs.
Rename the pumpkin board to follow the naming convention of all
other MediaTek boards and also to not be confusing when other pumpkin
boards will be added in follow-up commits.
Signed-off-by: Fabien Parent <[email protected]>
|
|
Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.
Signed-off-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
The mt7620_rfb board supports integrated 10/100M PHYs plus two external
giga PHYs. It also has 8MB SPI-NOR, mini PCI-e x1 slot, SDHC and USB.
The mt7620_mt7530_rfb boards supports an external MT7530 giga switch and a
16MB SPI-NOR flash.
Reviewed-by: Stefan Roese <[email protected]>
Signed-off-by: Weijie Gao <[email protected]>
|
|
Initialize USB device on pumpkin if it is enabled in the config.
Signed-off-by: Fabien Parent <[email protected]>
|
|
This is an MT7623A-based board, very similar to the Banana Pi R2.
http://www.unielecinc.com/q/news/cn/p/product/detail.html?qd_guid=OjXwKCaRlN
Signed-off-by: David Woodhouse <[email protected]>
|
|
On the UniElec U7623 board there is no external SD slot and the preloader
doesn't fill in the magic field at 0x81dffff0 to indicate that it was
booted from eMMC.
Signed-off-by: David Woodhouse <[email protected]>
|
|
Move this header out of the common header.
Signed-off-by: Simon Glass <[email protected]>
|
|
We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.
Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.
This requires quite a few header-file additions.
Signed-off-by: Simon Glass <[email protected]>
|
|
Move this uncommon header out of the common header.
Signed-off-by: Simon Glass <[email protected]>
|
|
This patch adds support for mt7628 reference board. SPL_DM and DT are not
enabled for SPL to save about 17KiB for u-boot-spl.bin.
Reviewed-by: Stefan Roese <[email protected]>
Signed-off-by: Weijie Gao <[email protected]>
|
|
Add board_late_init function to init usb gadget driver for mt8518
Signed-off-by: mingming lee <[email protected]>
|
|
This adds a general board file based on MT7622 SoCs from MediaTek.
This commit is adding the basic boot support for the MT7622 rfb.
Signed-off-by: Sam Shih <[email protected]>
Reviewed-by: Ryder Lee <[email protected]>
Tested-by: Frank Wunderlich <[email protected]>
|
|
This adds a general board file based on MT8512 SoCs from MediaTek.
Apart from the generic parts (cpu) we add some low level init codes
and initialize the early clocks.
This commit is adding the basic boot support for the MT8512 eMMC board.
Signed-off-by: mingming lee <[email protected]>
|
|
This adds a general board file based on MT8518 SoCs from MediaTek.
Apart from the generic parts (cpu) we add some low level init codes
and initialize the early clocks.
This commit is adding the basic boot support for the MT8518 eMMC board.
Signed-off-by: mingming lee <[email protected]>
[trini: Migrate env location to defconfig, set ENV_IS_IN_MMC]
Signeed-off-by: Tom Rini <[email protected]>
|
|
The pumpkin board is made by Gossamer Engineering and is using
a MediaTek SoC. The board currently comes in two available version:
MT8516 SoC and MT8167 SoC.
The board provides the following IOs: eMMC, NAND, SD card, USB type-A,
Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in),
serial over USB, and an expansion header.
Additionally there is a HDMI port, DSI port, and camera port only
on the MT8167 version of the board.
The board can be powered by battery and/or via a USB Type-C port and
is using a PMIC MT6392.
The eMMC and NAND are sharing pins and cannot be used together.
This commit is adding the basic boot support for the Pumpkin MT8516
board on the eMMC.
Signed-off-by: Fabien Parent <[email protected]>
|
