| Age | Commit message (Collapse) | Author |
|---|
|
Set the uart clock frequency according to dts by default.
If CONFIG_SYS_SKIP_UART_INIT is not enabled, no need to
do board_set_console to change the console bootarg.
Signed-off-by: Jim Liu <[email protected]>
|
|
Commit 86acdce2ba88 ("common: add config for board_init() call")
introduced CONFIG_BOARD_INIT option. This option can be disabled for the
boards where board_init() function is not needed. Remove empty
board_init() calls for all boards where it's possible, and disable
CONFIG_BOARD_INIT in all related defconfigs.
This cleanup was made semi-automatically using these scripts: [1].
No functional change, but the binary size for the modified boards is
reduced a bit.
[1] https://github.com/joe-skb7/uboot-convert-scripts/tree/master/remove-board-init
Signed-off-by: Sam Protsenko <[email protected]>
Tested-by: Adam Ford <[email protected]> #imx8mm_beacon
Tested-by: Bryan Brattlof <[email protected]>
Acked-by: Peng Fan <[email protected]> #NXP boards
|
|
Add a new event which handles this function refer to commit
("91caa3bb89b1 event: Use an event to replace last_stage_init()")
Signed-off-by: Michael Chang <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
If CONFIG_SYS_MEM_TOP_HIDE is defined, gd->ram_size is reduced by
CONFIG_SYS_MEM_TOP_HIDE. Need to correct the actual ram size in
dram_init_banksize.
Signed-off-by: Jim Liu <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
For 4GB dram size, the dram is divided into 2 banks and
the address space of these 2 banks are not concatenated.
Limit the gd->ram_top to not exceed bank0 top to prevent
accessing invalid memory region.
Signed-off-by: Jim Liu <[email protected]>
|
|
Add mem and console env information and modify the wrong earlycon env.
Signed-off-by: Jim Liu <[email protected]>
|
|
If CONFIG_SYS_SKIP_UART_INIT is enabled, calculate the
current baud rate and update the "console" environment
variable.
Signed-off-by: Jim Liu <[email protected]>
|
|
1. Fix incorrect ram size of 4GB dram with ECC enabled
2. Fix wrong place to set dram bank size
- The dram bank size should be set in dram_init_banksize
- Dram_init should not access gd->bd because the board info
struct is not reserved yet.
Signed-off-by: Jim Liu <[email protected]>
[trini: Rework slightly]
Signed-off-by: Tom Rini <[email protected]>
|
|
Add npcm8xx A2 cpu version check
and add 4G RAM support
Signed-off-by: Jim Liu <[email protected]>
|
|
use new memory layout and change uboot load address.
open tpm, tee and more config feature
No need to reserve top memory because the reserved space
is moved to the bottom area of memory.
Signed-off-by: Jim Liu <[email protected]>
|
|
add console and mem env to boot to linux kernel
Signed-off-by: Jim Liu <[email protected]>
|
|
Add basic support for the Nuvoton NPCM845 EVB (Arbel).
Signed-off-by: Jim Liu <[email protected]>
|
|
Add basic support for the Nuvoton NPCM750 EVB (Poleg).
Signed-off-by: Jim Liu <[email protected]>
|
