| Age | Commit message (Collapse) | Author |
|---|
|
Move the bulk of the board environment from CFG_EXTRA_ENV_SETTINGS in
ls1028ardb.h to board/nxp/ls1028a/ls1028ardb.env. Because the board
directory is shared with ls1028aqds, the file is selected through
CONFIG_ENV_SOURCE_FILE rather than the SYS_BOARD default.
The distro_bootcmd machinery cannot be expressed in a .env file. The
BOOTENV macro expands to environment text with embedded NUL separators,
and the board overrides three distro variables (boot_scripts,
boot_a_script and scan_dev_for_boot_part) that must follow BOOTENV to
take effect. BOOTENV and those three overrides therefore remain in
CFG_EXTRA_ENV_SETTINGS, which is concatenated after the .env text, while
every other variable moves to the .env file.
The resulting default environment is functionally unchanged for both the
ls1028ardb_tfa and ls1028ardb_tfa_SECURE_BOOT defconfigs. This was
verified with an order aware comparison of the default environment before
and after the change. The only difference is that three accidental double
spaces in xspi_bootcmd, sd_bootcmd and emmc_bootcmd collapse to single
spaces, because the preprocessor normalises whitespace in the now
unquoted text, which does not affect command parsing.
Signed-off-by: Aristo Chen <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Currently, the bi_dram[] information is stored in the board info
structure (bd). Because bd is only valid after reserve_board(),
dram_init_banksize() must be called late in the initialization process.
This limitation is problematic, as it forces us to rely on a variety of
bespoke functions to determine board RAM, bank memory sizes, and other
early setup requirements.
By moving bi_dram[] into the global data (gd), we can run it earlier.
This is particularly convenient since boards define their own
dram_init_banksize() routines, which do not always rely on parsing
Device Tree (DT) memory nodes.
Additionally, U-Boot defaults to relocating to the top of the first memory
bank. While boards currently use custom functions to override this
behavior, having the DRAM bank information available earlier in gd makes
relocating to a different bank trivial and standardizes the process.
Reviewed-by: Anshul Dalal <[email protected]>
Tested-by: Michal Simek <[email protected]> # Versal Gen 2 Vek385
Tested-by: Anshul Dalal <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
Tested-by: Christophe Leroy (CS GROUP) <[email protected]>
|
|
As hinted by its path, it's not really meant to be included outside of
the driver itself. This header uses CONFIG_SYS_RX_ETH_BUFFER which we
are trying to move under CONFIG_NET dependency. This file here can be
compiled without network support so make sure this only gets included
when needed.
The function from that header (fdt_fixup_enetc_mac) is already guarded
by CONFIG_FSL_ENETC so simply guard the inclusion of the header the same
way.
This was tested by building ls1028aqds_tfa_defconfig with
CONFIG_MSCC_FELIX_SWITCH and CONFIG_FSL_ENETC disabled.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Quentin Schulz <[email protected]>
|
|
board_eth_init() is dead code since commit e524f3a449f5 ("net: Remove
eth_legacy.c"). Remove it.
I'm not sure, all the shenanigans are covered by the new DM-version. The
MDIO mux and iomux controls probably are. The fman configuration
probably isn't. OTOH, nobody cared for years and the called
fm_info_set_phy_address() was also removed years ago.
This also removes fdt_fixup_board_enet() for the ls1043a and ls1046a
because it relies on the local variable "mdio_mux" being initialized by
the board_eth_init().
Signed-off-by: Michael Walle <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
This patch renames the board directory from board/freescale to
board/nxp because NXP now provides Board Support Packages (BSPs) and
tools for the former Freescale i.MX and other i.MX products.
All relevant references have been updated accordingly. This change does
not affect functionality.
Signed-off-by: Alice Guo <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
|
