| Age | Commit message (Collapse) | Author |
|---|
|
Add XOPIRV identifier for Orange Pi RV to dts selection callback in SPL,
and to fdtfile environment variable default value selection in payload.
Signed-off-by: E Shattow <[email protected]>
Reviewed-by: Hal Feng <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Set $fdtfile to the VisionFive 2 Lite DTB if the board is matched.
Reviewed-by: E Shattow <[email protected]>
Signed-off-by: Hal Feng <[email protected]>
|
|
by product_id
Add identifier for Milk-V Mars CM to dts selection callback in SPL, and
to fdtfile environment variable default value selection in payload.
Signed-off-by: E Shattow <[email protected]>
Reviewed-by: Hal Feng <[email protected]>
|
|
Per recent discussion [1] product IDs VF7110A or VF7110B from EEPROM are
sufficient to select for VisionFive 2 1.2a or VisionFive 2 1.3b boards.
There are no VisionFive 2 products with mixed-case product IDs in EERPOM
so factor out the unnecessary select case conditional.
1: https://lore.kernel.org/u-boot/ZQ2PR01MB1307D97D2C9566B8EE443812E6062@ZQ2PR01MB1307.CHNPR01.prod.partner.outlook.cn/
Signed-off-by: E Shattow <[email protected]>
Reported-by: Hal Feng <[email protected]>
|
|
Fixup previous merge resolution of this series. Intent is to ease code
readability and logic to match ordering in CONFIG_OF_LIST
- Remove "starfive/" string math
- Remove redundant local cache of calls to get_*_from_eeprom()
- Match name before EEPROM product_id in board_fit_config_name_match()
- Remove single-consumer FDTFILE_* defines
- Do not set fdtfile for visionfive-2-* when unknown model revision
Fixes: 5a0a93a76848 ("Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-riscv")
Signed-off-by: E Shattow <[email protected]>
|
|
We support all JH7110 boards with starfive_visionfive2_defconfig.
The relevant device-tree is selected at runtime based on EEPROM data.
Support setting $fdtfile to the file name of the DeepComputing Framework
motherboard (FML13V01) device-tree.
Reviewed-by: Hal Feng <[email protected]>
Reviewed-by: Matthias Brugger <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: E Shattow <[email protected]>
|
|
The default version should work for Starfive VisionFive 2.
Signed-off-by: Yao Zi <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Remove leftover code from Milk-V Mars CM and Mars CM Lite boards that do
not exist in upstream Linux Kernel devicetree-rebasing. These will be re-
introduced when submitted upstream for a future U-Boot release. Users of
these boards should use the previous stable release of U-Boot until then.
Signed-off-by: E Shattow <[email protected]>
|
|
This returns a devicetree and updates a parameter with an error code.
Swap it, since this fits better with the way U-Boot normally works. It
also (more easily) allows leaving the existing pointer unchanged.
No yaks were harmed in this change, but there is a very small code-size
reduction.
For sifive, the OF_BOARD option must be set for the function to be
called, so there is no point in checking it again. Also OF_SEPARATE is
defined always.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Matthias Brugger <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
[trini: Update total_compute]
Signed-off-by: Tom Rini <[email protected]>
|
|
Similar to the Milk-V Mars, The Star64 board contains few differences to the
VisionFive 2 boards, so can be part of the same U-boot build.
Signed-off-by: Henry Bell <[email protected]>
Cc: [email protected]
Cc: [email protected]
Reviewed-by: E Shattow <[email protected]>
|
|
We already support the VisionFive 2 and the Milk-V Mars board by
patching the VisionFive 2 device tree. With this patch the same
is done for the Milk-V Mars CM.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Tested-by: E. Shattow <[email protected]>
Reviewed-by: E. Shattow <[email protected]>
|
|
The usage of common.h is deprecated. Remove it from board files.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Set environment variable fdtfile to the correct value for the Milk-V Mars
board.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Currently in set_fdtfile() we set the value of environment variable fdtfile
unconditionally. The implies that a value in the environment will be
ignored.
With the patch environment variable fdtfile will only be set if it does not
yet exist. This requires that CONFIG_DEFAULT_FDT_FILE is not set.
Now the user can either set and save fdtfile interactively or in the U-Boot
configuration to overrule the device-tree name chosen based on the
hardware in set_fdtfile().
Reported-by: E Shattow <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Multiple revisions of the StarFive VisionFive 2 board exist. They can be
identified by reading their EEPROM.
Linux uses two differently named device-tree files. To load the correct
device-tree we need to set $fdtfile to the device-tree file name that
matches the board revision.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
Tested-by: Milan P. Stanić <[email protected]>
|
|
Multiple revisions of the StarFive VisionFive 2 board exist. They can be
identified by reading their EEPROM.
Linux uses two differently named device-tree files. To load the correct
device-tree we need to set $fdtfile to the device-tree file name that
matches the board revision.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Use fdt_fixup_memory to make the memory size data from dtb match
the actual size.
Signed-off-by: Shengyu Qu <[email protected]>
Tested-by: Milan P. Stanić <[email protected]>
|
|
Now all linker symbols are declared as type char[]. Though we can
reference the address via both the array name 'var' and its address
'&var'. It's better to unify them to avoid confusing developers.
This patch converts all '&var' linker symbol refrences to the most
commonly used format 'var'.
Signed-off-by: Shiji Yang <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Enabled ID_EEPROM and I2C configuration for StarFive VisionFive2 board.
Signed-off-by: Yanhong Wang <[email protected]>
Reviewed-By: Leo Yu-Chi Linag <[email protected]>
|
|
Add board support for StarFive VisionFive v2.
Signed-off-by: Yanhong Wang <[email protected]>
Tested-by: Conor Dooley <[email protected]>
|
