| Age | Commit message (Collapse) | Author |
|---|
|
Add PID4 0223 Aquila TDA4 Octa 16GB IT to config block handling.
Signed-off-by: Vitor Soares <[email protected]>
Reviewed-by: Francesco Dolcini <[email protected]>
|
|
Remove DECLARE_GLOBAL_DATA_PTR from files where gd is not used, and
drop the unnecessary inclusion of asm/global_data.h.
Headers should be included directly by the files that need them,
rather than indirectly via global_data.h.
Reviewed-by: Patrice Chotard <[email protected]> #STMicroelectronics boards and STM32MP1 ram test driver
Tested-by: Anshul Dalal <[email protected]> #TI boards
Acked-by: Yao Zi <[email protected]> #TH1520
Signed-off-by: Peng Fan <[email protected]>
|
|
Include linux/types.h and asm-generic/u-boot.h. Missing the two header
files will cause building error after cleaning up usage of
asm/global_data.h.
Signed-off-by: Peng Fan <[email protected]>
|
|
The toradex_smarc_imx95 board exposes three Ethernet ports.
Set the third MAC address equal to the second MAC address.
Signed-off-by: Max Krummenacher <[email protected]>
Reviewed-by: Francesco Dolcini <[email protected]>
|
|
Add new PID4 to ConfigBlock handling:
- 0217 Lino iMX93 Dual 2GB IT
- 0218 Lino iMX91 Solo 2GB IT
- 0219 OSM iMX93 Dual 2GB IT
- 0220 OSM iMX91 Solo 2GB IT
- 0221 Verdin AM62 Dual 1GB ET
Lino and OSM are two new SoM families.
The Verdin variant differs from the existing 0073 Verdin AM62 Dual 1GB ET
by the presence of the GPU (AM625 instead of AM623), the absence of
DSI interface (bridge not mounted) and eMMC size increased to 16GB instead
of 4GB.
Link: https://www.toradex.com/computer-on-modules/lino-arm-family
Link: https://www.toradex.com/computer-on-modules/osm-arm-family
Signed-off-by: Emanuele Ghidoli <[email protected]>
Reviewed-by: Francesco Dolcini <[email protected]>
|
|
The memory size of the 0098 SKU is 8 GB instead of 16 GB.
Fix PID4 0098 Aquila iMX95 definition.
Fixes: 4c9340716522 ("toradex: tdx-cfg-block: add new pid4 support")
Signed-off-by: Francesco Dolcini <[email protected]>
|
|
Add PID4 0216 Verdin iMX8M Mini Quad 2GB WB IT to config block handling.
Signed-off-by: Vitor Soares <[email protected]>
Acked-by: Francesco Dolcini <[email protected]>
|
|
Our last sync with the kernel was 5.1. Even that was a partial one
as some patches from 4.x kernels were already missing making the
transition to a modern kbuild infeasible.
We are so out of sync now, that tracking the patches and backporting
them one by one makes little sense and it's going to take ages.
This is an attempt to sync up Makefile[.lib/.kbuild].
Unfortunately due to sheer amount of patches this is not easy to review,
but that's what we decided during a community call.
One of the biggest changes is get rid of partial linking entirely and
build .a archives isntead of .o.
We diaviate from the kernel on that. Instead of calling a custom script
to create the archive symbol table, we call ar with rcTP (isntead of
rcSTP) since we want a resulting archive that's sauble with the linker.
The only affected platforms are PPC ones. Unfortunately I don't have any
of them around to test, but the objdump of the resulting files --
arch/powerpc/lib/built-in.[oa] looks identical.
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Add the new PID4 to the ConfigBlock handling:
- 0098 Aquila iMX95 Hexa 16GB WB IT
- 0099 Verdin AM62P Quad 2GB WB IT
- 0201 SMARC iMX95 Hexa 8GB IT
- 0202 SMARC iMX95 Hexa 4GB WB IT
- 0203 SMARC iMX95 Hexa 4GB ET
- 0204 SMARC iMX95 Hexa 2GB WB IT
- 0205 SMARC iMX95 Hexa 2GB ET
- 0206 SMARC iMX8M Plus Quad 4GB IT
- 0207 SMARC iMX8M Plus Quad 2GB WB IT
- 0208 SMARC iMX8M Plus Quad 2GB IT
- 0209 SMARC iMX8M Plus Quadlite 1GB WB ET
- 0210 SMARC iMX8M Plus Quadlite 1GB ET
- 0211 Aquila AM69 Octa 32GB IT
- 0212 Aquila AM69 Octa 16GB WB IT
- 0213 Aquila AM69 Octa 16GB IT
- 0214 Aquila AM69 Octa 8GB WB IT
- 0215 Aquila AM69 Octa 8GB IT
Signed-off-by: Vitor Soares <[email protected]>
|
|
The memory size of the 0089 SKU is 8 GB instead of 16 GB.
Fix PID4 0089 Verdin iMX95 definition, in the configuration block.
Fixes: ce53f46f33b4 ("toradex: tdx-cfg-block: add verdin imx95 sku 0089 pid4")
Signed-off-by: Emanuele Ghidoli <[email protected]>
Reviewed-by: Francesco Dolcini <[email protected]>
|
|
Add support for the Toradex SMARC iMX8MP.
Link: https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx-8m-plus
Link: https://www.toradex.com/products/carrier-board/smarc-development-board-kit
Signed-off-by: Vitor Soares <[email protected]>
|
|
Add PID4 0096 Toradex SMARC iMX95 Hexa 8GB WB IT to config block handling.
Signed-off-by: Vitor Soares <[email protected]>
|
|
The Toradex configuration block is stored in the first boot partition of
the eMMC. After reading the configuration block, U-Boot switches back to
the user partition. Currently, this operation always targets mmc device
0, even when the configuration block is stored on mmc device 2.
This patch addresses the issue by switching the mmc device set in
CONFIG_TDX_CFG_BLOCK_DEV to the user partition, rather than using the
hardcoded device 0.
Fixes: a2777ecb9d11 ("toradex: config block handling")
Signed-off-by: Stefan Eichenberger <[email protected]>
Reviewed-by: Francesco Dolcini <[email protected]>
|
|
Add new PIDs for the Apalis iMX8 modules featuring the industrial
variant of the SoC, which supports a maximum CPU frequency of 1300 MHz.
Signed-off-by: Stefan Eichenberger <[email protected]>
|
|
This preparation step ensures that the first column has sufficient space
to handle longer defines. This is necessary for the new Apalis iMX8
defines.
Signed-off-by: Stefan Eichenberger <[email protected]>
|
|
Apalis iMX8DXP 1GB is currently set to enable when compiling for Apalis
iMX8. This is a mistake the Apalis iMX8DXP 1GB was never released and is
not compatible to the Apalis iMX8 series.
Signed-off-by: Stefan Eichenberger <[email protected]>
|
|
The module pid4 currently corresponds to the index of the toradex_module
array. If a new pid4 is introduced that does not follow the sequence of
the previous entries, it will create a gap in the array.
To address this, embed pid4 within the toradex_som structure and
implement a function to retrieve the index corresponding to pid4.
Signed-off-by: Vitor Soares <[email protected]>
Acked-by: Francesco Dolcini <[email protected]>
|
|
We are about to add a large number of new entries. Update the prefix to
be a little shorter.
For SMBIOS items, use SYSID_SM_ (for System Management) which is enough
to distinguish it. For now at least, it seems that most items will be
for SMBIOS.
Signed-off-by: Simon Glass <[email protected]>
Acked-by: Raymond Mao <[email protected]>
|
|
Use the new symbol to refer to any 'SPL' build, including TPL and VPL
Signed-off-by: Simon Glass <[email protected]>
|
|
Add new PID4 0090 Verdin iMX8M Mini Quad 4GB WB ET to support
the new hardware variant.
Signed-off-by: Emanuele Ghidoli <[email protected]>
|
|
Add new PID4 0089 Verdin iMX95 Hexa 16GB WB IT to config block handling.
Signed-off-by: Emanuele Ghidoli <[email protected]>
|
|
Add new PID4 0088 Aquila AM69 Octa 32GB WB IT to config block handling.
Signed-off-by: Emanuele Ghidoli <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
Add new product id 0087 Verdin iMX8M Mini Quad 2GB IT.
Signed-off-by: Joao Paulo Goncalves <[email protected]>
|
|
Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in
case there is no toradex config block programmed.
In case of missing toradex config block the generated mac address was
always the same, linked to serial number 0.
Use random generated mac address instead.
Acked-by: Marcel Ziswiler <[email protected]>
Tested-by: Marcel Ziswiler <[email protected]> # Verdin iMX8M Plus
Signed-off-by: Emanuele Ghidoli <[email protected]>
Signed-off-by: Francesco Dolcini <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
|
|
This commit introduces support for the Toradex sysinfo driver in U-Boot,
which uses information from Toradex config block to print correct
board model.
In case the Toradex config block is not present sysinfo prints the model
of the board provided by device tree removing per board specific prints.
Acked-by: Marcel Ziswiler <[email protected]>
Tested-by: Marcel Ziswiler <[email protected]> # Verdin iMX8M Plus
Signed-off-by: Emanuele Ghidoli <[email protected]>
Signed-off-by: Francesco Dolcini <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
|
|
Use SETTINGS_R event to read toradex config block and checkboard()
to print board info.
Acked-by: Marcel Ziswiler <[email protected]>
Tested-by: Marcel Ziswiler <[email protected]> # Verdin iMX8M Plus
Signed-off-by: Emanuele Ghidoli <[email protected]>
Signed-off-by: Francesco Dolcini <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
|
|
Sysinfo prints the model obtained from device tree, checkboard()
take info from hardware and tdx_checkboard() use the model retrieved by
toradex config block.
Remove the print from checkboard() function because the model obtained
from toradex config block is the most complete.
If toradex config block is missing the model info from device tree is
enough.
Acked-by: Marcel Ziswiler <[email protected]>
Tested-by: Marcel Ziswiler <[email protected]> # Verdin iMX8M Plus
Signed-off-by: Emanuele Ghidoli <[email protected]>
Signed-off-by: Francesco Dolcini <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
|
|
Since checkboard() is used instead of show_board_info(), in case toradex
config block is missing or malformed, checkboard is recursively called.
It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack
is full.
Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()")
Acked-by: Marcel Ziswiler <[email protected]>
Tested-by: Marcel Ziswiler <[email protected]> # Verdin iMX8M Plus
Signed-off-by: Emanuele Ghidoli <[email protected]>
Signed-off-by: Francesco Dolcini <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
|
|
Add new product id 0086 Verdin iMX8M Mini DualLite 2GB IT.
Signed-off-by: Joao Paulo Goncalves <[email protected]>
Reviewed-by: Igor Opaniuk <[email protected]>
|
|
Add new apalis imx6 and colibri imx6/imx7 products IDs.
Signed-off-by: Joao Paulo Goncalves <[email protected]>
Acked-by: Marcel Ziswiler <[email protected]>
|
|
Boards can use a sysinfo driver if a particular model name is needed.
Update this board to use checkboard() directly, rather than having a
weak function laid on top of a weak function.
Make all the checkboard() functions call the new tdx_checkboard() so
that the same information is displayed.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add initial Verdin AM62 Quad 1GB WB IT prototype and launch
configuration SKUs to ConfigBlock handling.
0069: Verdin AM62 Quad 1GB WB IT
0071: Verdin AM62 Solo 512MB
0072: Verdin AM62 Solo 512MB WB IT
0073: Verdin AM62 Dual 1GB ET
0074: Verdin AM62 Dual 1GB IT
0075: Verdin AM62 Dual 1GB WB IT
0076: Verdin AM62 Quad 2GB WB IT
Signed-off-by: Marcel Ziswiler <[email protected]>
Signed-off-by: Emanuele Ghidoli <[email protected]>
|
|
Rework the rather big array of zero length strings with 4 entries of
actual display adapter names to a array of structs which ties a pid4
to its correspondent human readable string.
Provide an accessor to get the string for a given PID4.
Signed-off-by: Max Krummenacher <[email protected]>
Signed-off-by: Andrejs Cainikovs <[email protected]>
|
|
Rework the rather big array of zero length strings with 4 entries of
actual carrier board names to a array of structs which ties a pid4
to its correspondent human readable string.
Provide an accessor to get the string for a given PID4.
Rework the user of the information to use the accessor.
Note that check_pid8_sanity() is used for early samples of Dahlia and
the development board. Yavia isn't affected.
Signed-off-by: Max Krummenacher <[email protected]>
Signed-off-by: Andrejs Cainikovs <[email protected]>
|
|
Add the Yavia Carrier board name string to the known carrier
board list.
Signed-off-by: Max Krummenacher <[email protected]>
Signed-off-by: Andrejs Cainikovs <[email protected]>
|
|
Add new i.MX 8M Plus Quad SKU to ConfigBlock handling.
0070: Verdin iMX8M Plus Quad 8GB WB IT
This SKU is identical to 0066 but supporting Industrial Temperature range.
Signed-off-by: Emanuele Ghidoli <[email protected]>
Signed-off-by: Francesco Dolcini <[email protected]>
|
|
Now that all the old code is gone, rename this option. Driver model
migration is now complete.
Signed-off-by: Simon Glass <[email protected]>
|
|
We currently have an if_type (interface type) and a uclass id. These are
closely related and we don't need to have both.
Drop the if_type values and use the uclass ones instead.
Maintain the existing, subtle, one-way conversion between UCLASS_USB and
UCLASS_MASS_STORAGE for now, and add a comment.
Signed-off-by: Simon Glass <[email protected]>
|
|
A large number of files include <flash.h> as it used to be how various
SPI flash related functions were found, or for other reasons entirely.
In order to migrate some further CONFIG symbols to Kconfig we need to
not include flash.h in cases where we don't have a NOR flash of some
sort enabled. Furthermore, in cases where we are in common code and it
doesn't make sense to try and further refactor the code itself in to new
files we need to guard this inclusion.
Signed-off-by: Tom Rini <[email protected]>
|
|
Add product id print in show_board_info(), with an increasing number of
Toradex SKUs available with small differences it makes sense to print it.
Move serial number print to a dedicated line, this prevents the previous
line with the product name to overflow the 80 columns with any
reasonable product name length.
Signed-off-by: Francesco Dolcini <[email protected]>
|
|
Up to now in the code we named Toradex SKUs in a slightly different way
compared to the official product name, start using the official names
from now on to avoid misunderstanding.
This has also the nice benefit of the string being shorter, allowing
to fit nicely in 80 columns even adding the product ID when printing
the hardware information.
Signed-off-by: Francesco Dolcini <[email protected]>
|
|
Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)`
instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`.
Signed-off-by: Francesco Dolcini <[email protected]>
|
|
Remove stale show_boot_logo() declaration, not used anywhere.
Fixes: e6fd30dd9eef ("toradex: drop legacy show_boot_logo function and use splashscreen")
Signed-off-by: Francesco Dolcini <[email protected]>
|
|
Simplify interactive config block creation code, instead of having a
a long list of questions and a complex tree of preprocessor directive to
guess the exact SKU, just ask the user to select it from a list.
The modules list is filtered out to include only SKUs that are supported
by the specific u-boot binary in execution.
Signed-off-by: Francesco Dolcini <[email protected]>
|
|
Use generally available ARRAY_SIZE macro, instead of hand-coding it
every time is needed.
Signed-off-by: Francesco Dolcini <[email protected]>
|
|
Remove comment "not currently on sale" on specific SKUs, this
information does not belong to the code and will never be accurate.
Signed-off-by: Francesco Dolcini <[email protected]>
|
|
Add new i.MX 8M Mini SKU to ConfigBlock handling.
0068: Verdin iMX8M Mini Quad 2GB WB IT No CAN
This SKU is identical to 0055 but without CAN. Mention this in the name
so those modules can be distinguished.
Signed-off-by: Philippe Schenker <[email protected]>
Reviewed-by: Francesco Dolcini <[email protected]>
Signed-off-by: Francesco Dolcini <[email protected]>
|
