| Age | Commit message (Collapse) | Author |
|---|
|
All information is contained in the global MAINTAINERS or
TQ board MAINTAINERS.
Signed-off-by: Max Merchel <[email protected]>
|
|
Add MAINTAINERS file containing board-specific information and
the name of the board maintainer.
Signed-off-by: Max Merchel <[email protected]>
|
|
New SoM revision use series termination for eMMC signals while older do
not. To prevent signal overshot on older revisions, DSR must be set and
limited. The eMMC type is used to differentiate between revisions.
Keep a table with all types, that are known to require DSR.
Signed-off-by: Paul Gerber <[email protected]>
Signed-off-by: Max Merchel <[email protected]>
|
|
Add function from common mmc header and
select TQ_COMMON_SDMMC Kconfig option for MBa6
Signed-off-by: Max Merchel <[email protected]>
|
|
Reduce code duplication by adding a default implementation
Signed-off-by: Max Merchel <[email protected]>
|
|
Update functions to use the common baseboard header and
select TQ_COMMON_BB Kconfig option for MBa6 and WRU4.
While at it, remove empty implementations that are now covered by
board/tq/common.
Signed-off-by: Paul Gerber <[email protected]>
Signed-off-by: Max Merchel <[email protected]>
|
|
TQMa6 and other SoMs from TQ-Systems GmbH need a baseboard. Therefore
functionality of U-Boot board callbacks may be distributed between SoM
and baseboard implementation.
To prevent code duplication and boilerplate implement a baseboard specific
API for TQ boards with weak defaults that can be filled out for baseboard
implementations as needed.
Signed-off-by: Markus Niebel <[email protected]>
Signed-off-by: Max Merchel <[email protected]>
|
|
The SoM (TQMa6) can be used on various baseboards. No modifications to
the SoM files should be required to use the SoM on different baseboards.
Therefore, include the SoM headers in the baseboard.
Signed-off-by: Max Merchel <[email protected]>
|
|
Create tqma6 environment file and remove CFG_FEC_MXC_PHYADDR as it comes
from device tree.
Signed-off-by: Max Merchel <[email protected]>
|
|
Input from TQ-Systems hardware qualification team.
Fixes performance issues if ethernet and display are used simultaneously.
Signed-off-by: Markus Niebel <[email protected]>
Signed-off-by: Max Merchel <[email protected]>
|
|
Defaults for SoM variant should depend on SoC variant.
Signed-off-by: Max Merchel <[email protected]>
|
|
- imply DM_I2C / DM_SPI / DM_MMC / DM_GPIO: boot relevant
- add BUTTON support
- add gpio LED support
- enable CMD_TEMPERATURE to get query temperature in console
- remove Variants that are Kconfig default
- USB ethernet port is not in use by default, remove ethprime
Signed-off-by: Paul Gerber <[email protected]>
Signed-off-by: Markus Niebel <[email protected]>
Signed-off-by: Max Merchel <[email protected]>
|
|
- change maintainer e-Mail address
(old is not suitable for plain text mail)
- add TQ mailing list
Signed-off-by: Max Merchel <[email protected]>
|
|
While at it, adjust the TQ-Systems copyright info to include
consistent company information, the mail address to reach all
developers at TQ-Systems for questions regarding U-Boot support
for our SOM and remove author's company mail address not suitable
for plain text mail.
Signed-off-by: Markus Niebel <[email protected]>
Signed-off-by: Max Merchel <[email protected]>
|
|
fix checkpatch warnings
- WARNING: break is not useful after a return
- WARNING: Comparisons should place the constant
on the right side of the test
- WARNING: please write a help paragraph that fully describes
the config symbol with at least 2 lines
Signed-off-by: Paul Gerber <[email protected]>
Signed-off-by: Max Merchel <[email protected]>
|
|
The function `tqma6_iomuxc_spi()` was removed in the commit
"tqma6: Remove non-DM board code".
The original function was overwritten with an empty function in the
WRU4 baseboard and should also have been removed.
Therefore, the function and its call are being removed.
Fixes: 93552cc442de ("tqma6: Remove non-DM board code")
Signed-off-by: Max Merchel <[email protected]>
|
|
With DM_SERIAL in place, there is no need to setup the UART pins
in the board code.
The UART pins are setup via devicetree, thanks to DM.
Remove the unneeded code.
Signed-off-by: Fabio Estevam <[email protected]>
|
|
The PAD_CTRL definitions are not used anywhere.
Remove them to make the code cleaner.
Signed-off-by: Fabio Estevam <[email protected]>
|
|
CONFIG_DM_MMC and CONFIG_DM_SPI are alway selected so the mmc
and spi board code can be safely removed.
Remove it to make the code cleaner.
Signed-off-by: Fabio Estevam <[email protected]>
|
|
Currently, the devicetree model as well as the board variant name
are shown:
...
Model: TQ TQMa6S/DL on MBa6x
Board: TQMa6DL on a MBa6x
...
Unselect the CONFIG_DISPLAY_BOARDINFO option so that the
board name is printed only once in board_late_init() instead.
Signed-off-by: Fabio Estevam <[email protected]>
|
|
Currently, the power_init_board() function is not executed because
CONFIG_POWER_LEGACY is not selected.
Convert to PMIC driver model, which allows removing board I2C code in
favor of the I2C driver model.
Signed-off-by: Fabio Estevam <[email protected]>
|
|
Instead of using the local imx6-tqma6 devicetree copies from U-Boot,
convert the imx6-tqma6 target to OF_UPSTREAM so that the upstream
kernel devicetrees can be used instead.
Signed-off-by: Fabio Estevam <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
In order to make it easier to move on to dropping common.h from code
directly, remove common.h inclusion from the rest of the header file
which had been including it.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Initially investigating a Linux network issue causing a lot of drop and
poor network performances on a custom system based on a TQMA6A module
(based on an iMX6Q), [1st link below].
I eventually correlated my observations with a contention at the NIC
level when in concurrency with the graphics pipeline. Troubleshooting
this in the kernel lead to disabling DMA bursts accesses made by the IPU
in order to avoid triggering the QoS at the interconnect level, reducing
from 50 to 10% the drop rate on eth0, [2nd link below]. The solution
worked on my setup but not on others, which still suffered from
abnormally high drop rates even with this "fix".
After looking a while into TQ Systems BSP I figured out a number of
differences in recent U-Boot out-of-tree patches they had in their
repository [3rd link]. Parsing the differences one after the other lead
me to this final solution.
The reset pad of the DDR controller was apparently misconfigured, Bit
18-19 picturing the "DDR select field". The current value b11 is
reserved. The only defined value as of version 6 of the iMX6Q manual was
b00 "DDR3 and LPDDR2 mode". In practice no register difference has been
spotted after changing this configuration but all issues tracked thus
far just vanished. All previous fixes have been proven irrelevant. Just
clearing this field solved all our network issues and the drop rate as
measured by iperf3 felt back to 0%.
Link: https://lore.kernel.org/netdev/20231012193410.3d1812cf@xps-13/
Link: https://lists.freedesktop.org/archives/dri-devel/2023-October/428251.html
Link: https://github.com/tq-systems/u-boot-tqmaxx/commit/15eb6abbefbf6916c28467b85485911dad3da6bc
Signed-off-by: Miquel Raynal <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
|
|
We only need to enable DM_ETH if we have a networking driver. All
networking drivers depend on DM_ETH being enabled, and their selection
ensures DM_ETH will be enabled.
Signed-off-by: Tom Rini <[email protected]>
|
|
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE
and this makes it imposible to use CONFIG_VAL().
Rename it to resolve this problem.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is supposed to be a build-system flag. Move it there so we can
define it before linux/kconfig.h is included.
Signed-off-by: Simon Glass <[email protected]>
|
|
"TQ-Systems" is written with a dash.
Signed-off-by: Matthias Schiffer <[email protected]>
|
|
The subdivision name "TQ Components" hasn't been in use for a long time.
Rename the vendor directory to "tq", which also matches our Device Tree
vendor prefix.
Signed-off-by: Matthias Schiffer <[email protected]>
|
