| Age | Commit message (Collapse) | Author |
|---|
|
Currently, the bi_dram[] information is stored in the board info
structure (bd). Because bd is only valid after reserve_board(),
dram_init_banksize() must be called late in the initialization process.
This limitation is problematic, as it forces us to rely on a variety of
bespoke functions to determine board RAM, bank memory sizes, and other
early setup requirements.
By moving bi_dram[] into the global data (gd), we can run it earlier.
This is particularly convenient since boards define their own
dram_init_banksize() routines, which do not always rely on parsing
Device Tree (DT) memory nodes.
Additionally, U-Boot defaults to relocating to the top of the first memory
bank. While boards currently use custom functions to override this
behavior, having the DRAM bank information available earlier in gd makes
relocating to a different bank trivial and standardizes the process.
Reviewed-by: Anshul Dalal <[email protected]>
Tested-by: Michal Simek <[email protected]> # Versal Gen 2 Vek385
Tested-by: Anshul Dalal <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
Tested-by: Christophe Leroy (CS GROUP) <[email protected]>
|
|
base and size arrays can both contain up to total_memory_banks
elements.
This commit fixes the for loop condition to ensure that it does
not attempt to read past the end of both arrays.
Signed-off-by: Francois Berder <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
More recent revisions of the Ten64 board do not have a USB Hub
(USB5744). The references to the USB5744 need to be removed in U-Boot's
internal FDT to avoid the USB5744 setup being invoked on these boards.
Reviewed-by: Peng Fan <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Mathew McBride <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
The USB Hub (microchip,usb5744) can enter a dis-/reconnect loop
if a driver tries to re-initialise the hub over I2C.
On the Ten64 board, this process only needs to be run once
per system reset cycle, which is carried out by U-Boot.
As there are distributions shipping with the affected
driver by default, the best solution is to remove
the USB hub topology information from the FDT passed
to the operating system, so the OS won't attempt
to re-initialise the USB hub under any circumstance.
Signed-off-by: Mathew McBride <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
PPA was a secure firmware developed in-house which is no longer
supported and replaced by TF-A quite some years ago. Drop support
for it.
Signed-off-by: Laurentiu Tudor <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
The retimer reset/power on logic was changed in a recent commit,
however, it neglected to check if the commands sent to the
board microcontroller (to control power to the retimer chip)
actually completed.
Add return checks for these operations so any failures will
be reported to the user.
Signed-off-by: Mathew McBride <[email protected]>
Fixes: 7a041fea2 ("board: traverse: ten64: ensure retimer reset
is done on new board revisions")
|
|
The u-boot version of the LS1088A device tree has
an extra compatible (simple-mfd) added to &fsl_mc
to facilitate usage with U-Boot's device model.
Unfortunately FreeBSD will only match the single
"fsl,qoriq-mc" exactly when the node is a "bus"
object, so we need to strip out the extra compatible
before presenting it to the operating system.
Signed-off-by: Mathew McBride <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
Our bootcmd is the same regardless of where the SoC
loaded it's code from, so we don't want
fsl_setenv_bootcmd to do anything.
Signed-off-by: Mathew McBride <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
The GE0 (first Gigabit Ethernet interface) is used as the
'serial number' for the board and appliance.
To ensure the 'true' board S/N is available regardless of how
the DPAA2 subsystem is configured, use serial# so it is passed in
the device tree.
Signed-off-by: Mathew McBride <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
On Ten64 boards, the "serial number" is the MAC address of the
first Gigabit Ethernet interface (labelled GE0 on the appliance),
and counted up from there.
The previous logic did not take into account U-Boot's ordering
of the network interfaces. By setting aliases/ethernetX in the device
tree we can ensure the U-Boot 'ethX' is the same as the labelled
port order on the unit, as well as the one adopted by Linux.
Signed-off-by: Mathew McBride <[email protected]>
|
|
availability
Ensure nvme devices are scanned before reaching the shell,
otherwise extra user intervention ("nvme scan") is required
before they are visible to bootdev/bootflow.
Signed-off-by: Mathew McBride <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
Board revision C (production) and later require the SFP+
retimer to be turned on (or reset) on boot, by way of issuing
a command to the board's microcontroller (via I2C).
The comparison statement here was incorrect, as the board
ID decrements every revision (from 0xFF downwards),
so this was matching board RevA,B,C instead of Rev >= C.
Another oops that transpired when working on this issue,
is that if the board controller is not called (such as
CONFIG_TEN64_CONTROLLER=n or earlier board rev), then
the retimer udevice was not obtained. So the board
version check has to be moved inside board_cycle_retimer
(which probes/fetches the retimer device) as well.
Signed-off-by: Mathew McBride <[email protected]>
|
|
Ten64 board revision D is a variant that removes the USB hub
and PCIe expander/switch, but is otherwise compatible with the
main production "C" version.
At the same time, revise the printf specifiers (PCB version
"1064-0201%s") to reduce the number of string characters related
to the boot printout.
Signed-off-by: Mathew McBride <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
This converts 2 usages of this option to the non-SPL form, since there is
no SPL_TEN64_CONTROLLER defined in Kconfig
Signed-off-by: Simon Glass <[email protected]>
|
|
This converts 1 usage of this option to the non-SPL form, since there is
no SPL_RESV_RAM defined in Kconfig
Signed-off-by: Simon Glass <[email protected]>
|
|
This converts 1 usage of this option to the non-SPL form, since there is
no SPL_FSL_MC_ENET defined in Kconfig
Signed-off-by: Simon Glass <[email protected]>
|
|
This converts 1 usage of this option to the non-SPL form, since there is
no SPL_FSL_CAAM defined in Kconfig
Signed-off-by: Simon Glass <[email protected]>
|
|
Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Move this out of the common header and include it only where needed.
Signed-off-by: Simon Glass <[email protected]>
|
|
The Ten64 is a networking-oriented MiniITX board
using the NXP LS1088A SoC.
This patch provides the bare minimum to support
Ten64 boards under U-Boot for distroboot.
Some related drivers have not yet been submitted
and this basic support lacks some of the
opinionated defaults provided by our firmware
distribution.
Signed-off-by: Mathew McBride <[email protected]>
[Rebased]
Signed-off-by: Priyanka Jain <[email protected]>
|
