summaryrefslogtreecommitdiff
path: root/board/xen
AgeCommit message (Collapse)Author
2025-07-24treewide: Remove empty board_init() function from all boardsSam Protsenko
Commit 86acdce2ba88 ("common: add config for board_init() call") introduced CONFIG_BOARD_INIT option. This option can be disabled for the boards where board_init() function is not needed. Remove empty board_init() calls for all boards where it's possible, and disable CONFIG_BOARD_INIT in all related defconfigs. This cleanup was made semi-automatically using these scripts: [1]. No functional change, but the binary size for the modified boards is reduced a bit. [1] https://github.com/joe-skb7/uboot-convert-scripts/tree/master/remove-board-init Signed-off-by: Sam Protsenko <[email protected]> Tested-by: Adam Ford <[email protected]> #imx8mm_beacon Tested-by: Bryan Brattlof <[email protected]> Acked-by: Peng Fan <[email protected]> #NXP boards
2024-12-18fdt: Swap the signature for board_fdt_blob_setup()Simon Glass
This returns a devicetree and updates a parameter with an error code. Swap it, since this fits better with the way U-Boot normally works. It also (more easily) allows leaving the existing pointer unchanged. No yaks were harmed in this change, but there is a very small code-size reduction. For sifive, the OF_BOARD option must be set for the function to be called, so there is no point in checking it again. Also OF_SEPARATE is defined always. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Matthias Brugger <[email protected]> Reviewed-by: Patrice Chotard <[email protected]> [trini: Update total_compute] Signed-off-by: Tom Rini <[email protected]>
2024-05-20Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"Tom Rini
As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2024-05-19Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""Tom Rini
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2024-05-07board: xen: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <[email protected]>
2024-03-01xen: xenguest_arm64: map all VIRTIO MMIO regionPeng Fan
When run `virtio scan` on i.MX95, there is abort when accessing virtio mmio region. The issue is the mmio region is not mapped. So let's map all virtio mmio regions. Signed-off-by: Peng Fan <[email protected]>
2023-10-11board: xen: introduce virtio-blk supportAndrii Chepurnyi
Added new xenguest_arm64_virtio_defconfig which enables support for virtio-blk using various types of transport like virtio-pci, vrtio-mmio. Currently supported: up to 2 PCI host bridges and 10 MMIO devices. Note: DT parsing code was partly taken from pci-uclass.c Limitation: All memory regions should be below 4GB address space. Signed-off-by: Andrii Chepurnyi <[email protected]>
2021-12-27Convert CONFIG_CONS_INDEX et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CONS_INDEX CONFIG_DEBUG_UART_CLOCK CONFIG_FSL_TZPC_BP147 CONFIG_GENERIC_ATMEL_MCI CONFIG_IDENT_STRING CONFIG_LIBATA CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_LPC32XX_GPIO CONFIG_MP CONFIG_MPC8XXX_GPIO CONFIG_MTD_PARTITIONS CONFIG_MVGBE CONFIG_MXC_GPIO CONFIG_NR_DRAM_BANKS CONFIG_OF_BOARD_SETUP CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_OF_SYSTEM_SETUP CONFIG_PREBOOT CONFIG_ROCKCHIP_SERIAL CONFIG_RTC_ENABLE_32KHZ_OUTPUT CONFIG_RTC_MV CONFIG_SCSI_AHCI CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_SPEED CONFIG_SOFT_SPI CONFIG_SPI_FLASH_EON CONFIG_SPI_FLASH_MACRONIX CONFIG_SPI_FLASH_MTD CONFIG_SPI_FLASH_SPANSION CONFIG_SPI_FLASH_SST CONFIG_SPI_FLASH_STMICRO CONFIG_SUPPORT_RAW_INITRD CONFIG_SYS_ARCH_TIMER CONFIG_SYS_BOARD CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE CONFIG_SYS_DCACHE_OFF CONFIG_SYS_FDT_SAVE_ADDRESS CONFIG_SYS_FLASH_CFI CONFIG_SYS_FSL_ERRATUM_ESDHC135 CONFIG_SYS_HAS_SERDES CONFIG_SYS_L2CACHE_OFF CONFIG_SYS_LITTLE_ENDIAN CONFIG_SYS_LOAD_ADDR CONFIG_SYS_MMCSD_FS_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR CONFIG_SYS_NS16550 CONFIG_SYS_PLLFIN CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_TIMER_SYS_TICK_CH CONFIG_USB_EHCI_FSL CONFIG_U_QE CONFIG_VERSION_VARIABLE Signed-off-by: Tom Rini <[email protected]>
2021-10-27sandbox: Remove OF_HOSTFILEIlias Apalodimas
OF_HOSTFILE is used on sandbox configs only. Although it's pretty unique and not causing any confusions, we are better of having simpler config options for the DTB. So let's replace that with the existing OF_BOARD. U-Boot would then have only three config options for the DTB origin. - OF_SEPARATE, build separately from U-Boot - OF_BOARD, board specific way of providing the DTB - OF_EMBED embedded in the u-boot binary(should not be used in production Signed-off-by: Ilias Apalodimas <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2021-09-30WS cleanup: remove trailing empty linesWolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]>
2021-03-02reset: Remove addr parameter from reset_cpu()Harald Seiler
Historically, the reset_cpu() function had an `addr` parameter which was meant to pass in an address of the reset vector location, where the CPU should reset to. This feature is no longer used anywhere in U-Boot as all reset_cpu() implementations now ignore the passed value. Generic code has been added which always calls reset_cpu() with `0` which means this feature can no longer be used easily anyway. Over time, many implementations seem to have "misunderstood" the existence of this parameter as a way to customize/parameterize the reset (e.g. COLD vs WARM resets). As this is not properly supported, the code will almost always not do what it is intended to (because all call-sites just call reset_cpu() with 0). To avoid confusion and to clean up the codebase from unused left-overs of the past, remove the `addr` parameter entirely. Code which intends to support different kinds of resets should be rewritten as a sysreset driver instead. This transformation was done with the following coccinelle patch: @@ expression argvalue; @@ - reset_cpu(argvalue) + reset_cpu() @@ identifier argname; type argtype; @@ - reset_cpu(argtype argname) + reset_cpu(void) { ... } Signed-off-by: Harald Seiler <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2020-08-24MAINTAINERS: Add maintainers to XEN sectionAnastasiia Lukianenko
Signed-off-by: Anastasiia Lukianenko <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-08-24board: xen: Remove unnecessary CONFIG_BOARD_EARLY_INIT_F define and ↵Anastasiia Lukianenko
board_early_init_f function Signed-off-by: Anastasiia Lukianenko <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2020-08-14board: xen: De-initialize before jumping to LinuxOleksandr Andrushchenko
Free resources used by Xen board before jumping to Linux kernel. Signed-off-by: Oleksandr Andrushchenko <[email protected]> Signed-off-by: Anastasiia Lukianenko <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-08-14xen: Port Xen grant table driver from mini-osOleksandr Andrushchenko
Make required updates to run on u-boot. Signed-off-by: Oleksandr Andrushchenko <[email protected]> Signed-off-by: Anastasiia Lukianenko <[email protected]>
2020-08-14xen: Port Xen bus driver from mini-osOleksandr Andrushchenko
Make required updates to run on u-boot and strip test code. Signed-off-by: Anastasiia Lukianenko <[email protected]> Signed-off-by: Oleksandr Andrushchenko <[email protected]>
2020-08-14serial: serial_xen: Add Xen PV serial driverPeng Fan
Add support for Xen para-virtualized serial driver. This driver fully supports serial console for the virtual machine. Please note that as the driver is initialized late, so no banner nor memory size is visible. Signed-off-by: Peng Fan <[email protected]> Signed-off-by: Oleksandr Andrushchenko <[email protected]> Signed-off-by: Anastasiia Lukianenko <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-08-14board: Introduce xenguest_arm64 boardAndrii Anisov
Introduce a minimal Xen guest board running as a virtual machine under Xen Project's hypervisor [1], [2]. Part of the code is ported from Xen mini-os and also uses work initially done by different authors from NXP: please see relevant files for their copyrights. [1] https://xenbits.xen.org [2] https://wiki.xenproject.org/ Signed-off-by: Andrii Anisov <[email protected]> Signed-off-by: Oleksandr Andrushchenko <[email protected]> Signed-off-by: Anastasiia Lukianenko <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-04-13 10:47:02 +0000