summaryrefslogtreecommitdiff
path: root/board/xilinx/zynq
AgeCommit message (Collapse)Author
6 daysglobal: Switch from source.denx.de to git.u-boot-project.orgTom Rini
As part of moving our git forge to a new location, update all references in tree to point to git.u-boot-project.org now. Signed-off-by: Tom Rini <[email protected]>
2026-06-24treewide: move bi_dram[] from bd to gdIlias Apalodimas
Currently, the bi_dram[] information is stored in the board info structure (bd). Because bd is only valid after reserve_board(), dram_init_banksize() must be called late in the initialization process. This limitation is problematic, as it forces us to rely on a variety of bespoke functions to determine board RAM, bank memory sizes, and other early setup requirements. By moving bi_dram[] into the global data (gd), we can run it earlier. This is particularly convenient since boards define their own dram_init_banksize() routines, which do not always rely on parsing Device Tree (DT) memory nodes. Additionally, U-Boot defaults to relocating to the top of the first memory bank. While boards currently use custom functions to override this behavior, having the DRAM bank information available earlier in gd makes relocating to a different bank trivial and standardizes the process. Reviewed-by: Anshul Dalal <[email protected]> Tested-by: Michal Simek <[email protected]> # Versal Gen 2 Vek385 Tested-by: Anshul Dalal <[email protected]> Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Ilias Apalodimas <[email protected]> Tested-by: Christophe Leroy (CS GROUP) <[email protected]>
2026-02-17treewide: Clean up DECLARE_GLOBAL_DATA_PTR usagePeng Fan
Remove DECLARE_GLOBAL_DATA_PTR from files where gd is not used, and drop the unnecessary inclusion of asm/global_data.h. Headers should be included directly by the files that need them, rather than indirectly via global_data.h. Reviewed-by: Patrice Chotard <[email protected]> #STMicroelectronics boards and STM32MP1 ram test driver Tested-by: Anshul Dalal <[email protected]> #TI boards Acked-by: Yao Zi <[email protected]> #TH1520 Signed-off-by: Peng Fan <[email protected]>
2026-01-02kbuild: Bump the build system to 6.1Sughosh Ganu
Our last sync with the kernel was 5.1. We are so out of sync now, that tracking the patches and backporting them one by one makes little sense and it's going to take ages. This is an attempt to sync up Makefiles to 6.1. Unfortunately due to sheer amount of patches this is not easy to review, but that's what we decided during a community call for the bump to 5.1, so we are following the same guidelines here. Signed-off-by: Sughosh Ganu <[email protected]> Signed-off-by: Ilias Apalodimas <[email protected]>a #rebased on -next
2025-04-16xilinx: zynq: fix dfu alt buffer clearingVincent Stehlé
The set_dfu_alt_info() function calls the ALLOC_CACHE_ALIGN_BUFFER() macro to declare a `buf' variable pointer into an array allocated on the stack. It then calls the memset() function to clear the useable portion of the array using the idiomatic expression `sizeof(buf)'. While this would indeed work fine for an array, in the present case we end up clearing only the size of a pointer. Fix this by specifying the explicit size `DFU_ALT_BUF_LEN' instead. Fixes: c67fecd2125b ("ARM: zynq: Enable capsule update for qspi and mmc") Signed-off-by: Vincent Stehlé <[email protected]> Cc: Michal Simek <[email protected]> Cc: Tom Rini <[email protected]> Acked-by: Padmarao Begari <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2025-04-11board: remove capsule update support in set_dfu_alt_info()Jonathan Humphreys
Now that capsule update sets the dfu_alt_info environment variable explicitly, there is no need to support it in the set_dfu_alt_info() function. Decouple SET_DFU_ALT_INFO from EFI_CAPSULE_FIRMWARE_FIT and EFI_CAPSULE_FIRMWARE_RAW. For many boards, this was the only use of set_dfu_alt_info() so remove the function entirely. Fixes: a9e6f01a941f ("efi: Define set_dfu_alt_info() for boards with UEFI capsule update enabled") Signed-off-by: Jonathan Humphreys <[email protected]> Signed-off-by: Michal Simek <[email protected]> Reviewed-by: Mattijs Korpershoek <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> # for board/libre-computer/* Reviewed-by: Ilias Apalodimas <[email protected]> Reviewed-by: Wadim Egorov <[email protected]> # for
2025-04-11xilinx: dfu: Fill directly update_info.dfu_stringMichal Simek
Directly fill update_info.dfu_string to prepare platforms to switch from using dfu_alt_info variable to dfu_string which contains description for capsule update when switch is done. Signed-off-by: Michal Simek <[email protected]> Reviewed-by: Mattijs Korpershoek <[email protected]> Acked-by: Ilias Apalodimas <[email protected]>
2025-03-03xilinx: zynq: Guard code around SPL_FS_LOAD_PAYLOAD_NAMEMichal Simek
Guard code around CONFIG_SPL_FS_LOAD_PAYLOAD_NAME usage to avoid compilation failure. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/f15a9762494945814b06a71db90ee4db59dd17ed.1738910601.git.michal.simek@amd.com
2024-10-14Merge patch series "Integrate MbedTLS v3.6 LTS with U-Boot"Tom Rini
Raymond Mao <[email protected]> says: Integrate MbedTLS v3.6 LTS (currently v3.6.0) with U-Boot. Motivations: ------------ 1. MbedTLS is well maintained with LTS versions. 2. LWIP is integrated with MbedTLS and easily to enable HTTPS. 3. MbedTLS recently switched license back to GPLv2. Prerequisite: ------------- This patch series requires mbedtls git repo to be added as a subtree to the main U-Boot repo via: $ git subtree add --prefix lib/mbedtls/external/mbedtls \ https://github.com/Mbed-TLS/mbedtls.git \ v3.6.0 --squash Moreover, due to the Windows-style files from mbedtls git repo, we need to convert the CRLF endings to LF and do a commit manually: $ git add --renormalize . $ git commit New Kconfig options: -------------------- `MBEDTLS_LIB` is for MbedTLS general switch. `MBEDTLS_LIB_CRYPTO` is for replacing original digest and crypto libs with MbedTLS. `MBEDTLS_LIB_CRYPTO_ALT` is for using original U-Boot crypto libs as MbedTLS crypto alternatives. `MBEDTLS_LIB_X509` is for replacing original X509, PKCS7, MSCode, ASN1, and Pubkey parser with MbedTLS. By default `MBEDTLS_LIB_CRYPTO_ALT` and `MBEDTLS_LIB_X509` are selected when `MBEDTLS_LIB` is enabled. `LEGACY_CRYPTO` is introduced as a main switch for legacy crypto library. `LEGACY_CRYPTO_BASIC` is for the basic crypto functionalities and `LEGACY_CRYPTO_CERT` is for the certificate related functionalities. For each of the algorithm, a pair of `<alg>_LEGACY` and `<alg>_MBEDTLS` Kconfig options are introduced. Meanwhile, `SPL_` Kconfig options are introduced. In this patch set, MBEDTLS_LIB, MBEDTLS_LIB_CRYPTO and MBEDTLS_LIB_X509 are by default enabled in qemu_arm64_defconfig and sandbox_defconfig for testing purpose. Patches for external MbedTLS project: ------------------------------------- Since U-Boot uses Microsoft Authentication Code to verify PE/COFFs executables which is not supported by MbedTLS at the moment, addtional patches for MbedTLS are created to adapt with the EFI loader: 1. Decoding of Microsoft Authentication Code. 2. Decoding of PKCS#9 Authenticate Attributes. 3. Extending MbedTLS PKCS#7 lib to support multiple signer's certificates. 4. MbedTLS native test suites for PKCS#7 signer's info. All above 4 patches (tagged with `mbedtls/external`) are submitted to MbedTLS project and being reviewed, eventually they should be part of MbedTLS LTS release. But before that, please merge them into U-Boot, otherwise the building will be broken when MBEDTLS_LIB_X509 is enabled. See below PR link for the reference: https://github.com/Mbed-TLS/mbedtls/pull/9001 Miscellaneous: -------------- Optimized MbedTLS library size by tailoring the config file and disabling all unnecessary features for EFI loader. From v2, original libs (rsa, asn1_decoder, rsa_helper, md5, sha1, sha256, sha512) are completely replaced when MbedTLS is enabled. From v3, the size-growth is slightly reduced by refactoring Hash functions. From v6, smaller implementations for SHA256 and SHA512 are enabled and target size reduce significantly. Target(QEMU arm64) size-growth when enabling MbedTLS: v1: 6.03% v2: 4.66% v3 - v5: 4.55% v6: 2.90% Tests done: ----------- EFI Secure Boot test (EFI variables loading and verifying, EFI signed image verifying and booting) via U-Boot console. EFI Secure Boot and Capsule sandbox test passed. Known issues: ------------- None. Link: https://lore.kernel.org/u-boot/[email protected]/
2024-10-14md5: Remove md5 non-watchdog APIRaymond Mao
We don't need an API specially for non-watchdog since md5_wd supports it by disabling CONFIG_HW_WATCHDOG and CONFIG_WATCHDOG. Set 0x10000 as default chunk size for MD5. Signed-off-by: Raymond Mao <[email protected]> Reviewed-by: Ilias Apalodimas <[email protected]> Reviewed-by: Michal Simek <[email protected]>
2024-10-11board: Use CONFIG_XPL_BUILD instead of CONFIG_SPL_BUILDSimon Glass
Use the new symbol to refer to any 'SPL' build, including TPL and VPL Signed-off-by: Simon Glass <[email protected]>
2024-07-22board: xilinx: Remove duplicate newlinesMarek Vasut
Drop all duplicate newlines. No functional change. Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Michal Simek <[email protected]>
2024-05-20Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"Tom Rini
As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2024-05-19Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""Tom Rini
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2024-05-07board: xilinx: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <[email protected]>
2023-12-13xilinx: zynq: Generate dfu for SPI only when enabledMichal Simek
Bitmain S9 board is not enabling SPI that's why CONFIG_SYS_SPI_U_BOOT_OFFS symbol is not present which ends in build failure when EFI/DFU infrastructure is enabled. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/3ea0572dbda8f21270c00a77528eb6ec954c7c40.1699866313.git.michal.simek@amd.com
2023-10-16cmd: Convert existing long help messages to the new macroTom Rini
- Generally we just drop the #ifdef CONFIG_SYS_LONGHELP and endif lines and use U_BOOT_LONGHELP to declare the same variable name as before - In a few places, either rename the variable to follow convention or introduce the variable as it was being done inline before. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-07-21xilinx: zynq: Add the missing function prototypesAlgapally Santosh Sagar
Add the missing prototypes for the functions pointed by the below sparse warnings warning: no previous prototype for 'set_dfu_alt_info' [-Wmissing-prototypes] warning: no previous prototype for 'board_debug_uart_init' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <[email protected]> Signed-off-by: Ashok Reddy Soma <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2023-07-21arm: zynq: Pass the missing argument type in function definitionAlgapally Santosh Sagar
Pass missing argument type in the function definition to fix the sparse warning, warning: old-style function definition [-Wold-style-definition] Signed-off-by: Algapally Santosh Sagar <[email protected]> Signed-off-by: Ashok Reddy Soma <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2023-02-09Correct SPL uses of ENV_VARS_UBOOT_RUNTIME_CONFIGSimon Glass
This converts 4 usages of this option to the non-SPL form, since there is no SPL_ENV_VARS_UBOOT_RUNTIME_CONFIG defined in Kconfig Signed-off-by: Simon Glass <[email protected]>
2022-12-05global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-10-05xilinx: zynq: Enable early eeprom decodingMichal Simek
Xilinx Zynq evaluation boards have factory program content in eeprom. Enable reading and decoding eeprom content to get information about board name, revision and especially getting ethernet mac address. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/db334bd3c0a377074a43b7ae479fade98efb545f.1664265344.git.michal.simek@amd.com
2022-09-13xilinx: Define only mmc devnum not partitionMichal Simek
The commit 53b406369e9d ("DFU: Check the number of arguments and argument string strictly") added strict control over string that 0:1 partition definition is not valid anymore that's why use only device number without partition ID. Device is specified by 2nd parameter and partition by 3rd. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/840eca944f4f2abeeb63b5d724f9ba5fe9a9213b.1660055571.git.michal.simek@amd.com
2022-09-13xilinx: zynq: Use CONFIG_SPL_FS_LOAD_PAYLOAD_NAME for dfu_alt_infoMichal Simek
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME stores the name of firmware file to be loaded by SPL. Name can be selected via Kconfig that's why use the macro. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/601fbc2dfd16b4708fc6b5f86954e10add43334e.1660055571.git.michal.simek@amd.com
2022-09-13xilinx: Fix logic when dfu_alt_info is generatedMichal Simek
Generate dfu_alt_info only when it is not defined. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/464e4b325c644e52a660df9cf44eeb4d80427f6a.1660055571.git.michal.simek@amd.com
2022-04-15capsule: board: Add information needed for capsule updatesSughosh Ganu
Add a structure which defines the information that is needed for executing capsule updates on a platform. Some information in the structure like the dfu string is used for making the update process more robust while some information like the per platform image GUIDs is used for fixing issues. Initialise this structure in the board file, and use the information for the capsule updates. Signed-off-by: Sughosh Ganu <[email protected]>
2022-02-21ARM: zynq: Fix debug uart initializationMichal Simek
The commit 0dba45864b2a ("arm: Init the debug UART") calls debug_uart_init() from crt0.S but it won't work because SOC is not configured yet. That's why create board_debug_uart_init() which calls ps7_init() earlier before the first access to UART. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/18e67e02a0c7190839a1ef3a11f3fd6babcf34cc.1645104518.git.michal.simek@xilinx.com
2021-09-30Merge tag 'xilinx-for-v2022.01-rc1' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2022.01-rc1 zynq: - Enable capsule update for qspi and mmc - Update zed DT qspi compatible string zynqmp: - Add missing modeboot for EMMC - Add missing nand DT properties - List all eeproms for SC on vck190 - Add vck190 SC psu_init clk: - Handle only GATE type clock for Versal watchdog: - Update versal driver to handle system reset
2021-09-30WS cleanup: remove excessive empty linesWolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]>
2021-09-30WS cleanup: remove trailing empty linesWolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]>
2021-09-30ARM: zynq: Enable capsule update for qspi and mmcMichal Simek
Generate dfu_alt_info setup at runtime for capsule update. Enabling this feature will help with upgrading boards without remembering what is where. The similar change was done for ZynqMP by commit b86f43de0be0 ("xilinx: zynqmp: Add support for runtime dfu_alt_info setup"). Code needs to be enabled by CONFIG_SET_DFU_ALT_INFO. And also enable capsule on disk for RAW firmware images with efidebug command. Two indexes are supported for SPL flow. Images can be generated like: ./tools/mkeficapsule --raw spl/boot.bin --index 1 capsule1.bin ./tools/mkeficapsule --raw u-boot.img --index 2 capsule2.bin Then place them to SD card and load them: load mmc 0 10000000 capsule1.bin && efidebug capsule update -v 10000000 load mmc 0 10000000 capsule2.bin && efidebug capsule update -v 10000000 FSBL flow will also work where only index 1 capsule is used. There should be enough space for using boot.bin with bitstream too. Zynq also support multiple boot locations in SPI or MMC but it is not wired by this patch. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/bea5fc75a87a5971f118b46bab4aa7ca39a629c6.1630061610.git.michal.simek@xilinx.com
2021-08-02global: Convert simple_strtoul() with hex to hextoul()Simon Glass
It is a pain to have to specify the value 16 in each call. Add a new hextoul() function and update the code to use it. Add a proper comment to simple_strtoul() while we are here. Signed-off-by: Simon Glass <[email protected]>
2021-07-26xilinx: Return ENVL_NOWHERE instead of ENVL_UNKNOWNMike Looijmans
The system refuses to boot without any environment, so return ENVL_NOWHERE when there's nowhere to store the environment instead of ENVL_UNKNOWN. This fixes that the board won't boot from eMMC when CONFIG_ENV_IS_IN_FAT is not defined, for example. Similar for other combinations. Fixes: 1025bd098aa8 "xilinx: zynqmp: Add support for saving variables" Signed-off-by: Mike Looijmans <[email protected]> Signed-off-by: Michal Simek <[email protected]>
2021-04-23xilinx: zynq: Add support for saving env based on bootmodeAshok Reddy Soma
Enable saving variables to MMC(FAT), NAND, SPI based on primary bootmode. If bootmode is JTAG, dont save env anywhere(NOWHERE). Since most of the flashes on zynq evaluation boards are 16MB in size, set default ENV_OFFSET to 15MB(0xE00000). Signed-off-by: Ashok Reddy Soma <[email protected]> Signed-off-by: Michal Simek <[email protected]>
2021-02-28Correct U-Boot upstream repositoryHeinrich Schuchardt
The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <[email protected]>
2021-02-23Merge tag 'xilinx-for-v2021.04-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2021.04-rc3 qspi: - Support for dual/quad mode - Fix speed handling clk: - Add clock enable function for zynq/zynqmp/versal gem: - Enable clock for Versal - Fix error path - Fix mdio deregistration path fpga: - Fix buffer alignment for ZynqMP xilinx: - Fix reset reason clearing in ZynqMP - Show silicon version in SPL for Zynq/ZynqMP - Fix DTB selection for ZynqMP - Rename zc1275 to zcu1275 to match DT name
2021-02-10xilinx: Show silicon version in SPLMichal Simek
Both Zynq and ZynqMP can show silicon versions in SPL boot flow. It is useful to be aware. The patch is also fixing possition of these bits on ZynqMP. Signed-off-by: Michal Simek <[email protected]>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2021-01-05xilinx: Fill git repository for Xilinx boardsMichal Simek
All Xilinx SoCs have repository location filled already but boards are covered by different fragment which is missing this link. The patch is extending description with adding proper link to the same repository. Reported-by: Heinrich Schuchardt <[email protected]> Signed-off-by: Michal Simek <[email protected]>
2020-10-27xilinx: common: Add Makefile to common folderMichal Simek
There is no need to reference files in common folder back. Simply adding Makefile to this folder does the job because this "common" location is already wired in main Makefile. Signed-off-by: Michal Simek <[email protected]>
2020-10-27ARM: zynq: Add Z-turn board V5Alexandre GRIVEAUX
Adding Z-turn board V5 to resolve the change between: "Z-TURNBOARD_schematic.pdf" schematics state version 1 to 4 has Atheros AR8035 "Z-Turn_Board_sch_V15_20160303.pdf" schematics state version 5 has Micrel KSZ9031 At this time the S25FL128SAGNFI003 doesn't work because of bug: *** Warning - spi_flash_probe_bus_cs() failed, using default environment zynq-zturn was checked on V5 board, same error. Maybe Z-turn board have the same problem (board with W25Q128BVFIG). Signed-off-by: Alexandre GRIVEAUX <[email protected]> Signed-off-by: Michal Simek <[email protected]>
2020-08-20xilinx: Add support for ENV_VARS_UBOOT_RUNTIME_CONFIGMichal Simek
Start to use ENV_VARS_UBOOT_RUNTIME_CONFIG to enable/disable updating variables with run time information. Signed-off-by: Michal Simek <[email protected]>
2020-06-24fpga: zynqpl: Add zynq aes load & loadp commandsT Karthik Reddy
Added support for zynq aes load & loadp commands. Signed-off-by: T Karthik Reddy <[email protected]> Signed-off-by: Siva Durga Prasad Paladugu <[email protected]> Signed-off-by: Michal Simek <[email protected]>
2020-06-24fpga: zynqpl: Correct PL bitstream loading sequence for zynqaesSiva Durga Prasad Paladugu
Correct the PL bitstream loading sequence for zynqaes command by clearing the loaded PL bitstream before loading the new encrypted bitstream using the zynq aes command. This was done by setting the PROG_B same as in case of fpgaload commands. This patch fixes the issue of loading the encrypted PL bitstream onto the PL in which a bitstream has already been loaded successfully. Signed-off-by: Siva Durga Prasad Paladugu <[email protected]> Signed-off-by: Michal Simek <[email protected]>
2020-05-18common: Drop linux/bitops.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <[email protected]>
2020-05-18common: Drop log.h from common headerSimon Glass
Move this header out of the common header. Signed-off-by: Simon Glass <[email protected]>
2020-05-18command: Remove the cmd_tbl_t typedefSimon Glass
We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <[email protected]>
2020-05-18common: Drop part.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <[email protected]>
2020-04-27xilinx: Introduce board_late_init_xilinx()Michal Simek
This function should keep common shared late configurations for Xilinx SoCs. Signed-off-by: Michal Simek <[email protected]>
2020-02-28ARM: zynq: Rename defconfig to be align with ZynqMP and VersalMichal Simek
Just cosmetic change before real switch. Signed-off-by: Michal Simek <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-07-26 18:21:53 +0000