| Age | Commit message (Collapse) | Author |
|---|
|
The bootm command can handle the compressed image, but current
code fails to boot from it.
## Loading kernel (any) from FIT Image at a8000000 ...
<snip>
Compression: gzip compressed
Data Start: 0xa80000d4
Data Size: 10114520 Bytes = 9.6 MiB
Architecture: AArch64
OS: EFI Firmware
Load Address: 0x90000000
<snip>
Uncompressing Kernel Image to 90000000
## Transferring control to EFI (at address a80000d4) ...
Booting <NULL>
Not a PE-COFF file
Loading image failed
To take care of the compressed image, the load address needs
to be passed instead of the original compressed image address.
Signed-off-by: Masahisa Kojima <[email protected]>
Tested-by: Kunihiko Hayashi <[email protected]>
|
|
When booting RISC-V ELF-formatted kernel images (IH_TYPE_KERNEL + IH_OS_ELF),
explicitly pass SMP hart ID (via a0/argc) and DTB address (via a1/argv)
to comply with modern SMP-enabled kernels' boot protocol requirements.
See https://www.kernel.org/doc/html/latest/arch/riscv/boot.html#register-state
Signed-off-by: Zone.N <[email protected]>
|
|
The EFI sub-system needs the load address and not the entry point
to boot the binary passed from the bootm command. The entry point
is derived from the PE-COFF header of the binary.
Fixes: ecc7fdaa9ef1 ("bootm: Add a bootm command for type IH_OS_EFI")
Reviewed-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2025-07-rc1
CI:
* https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/25648
Documentation:
* Update authenticated capsules documentation
UEFI:
* Add support for loading FIT images including initrd
- efi_loader: efi_load_initrd: provide a memory mapped initrd
- efi_loader: binary_run: register an initrd
- bootm: add support for initrd in do_bootm_efi
* efi_selftest: remove un-needed NULL checks
* efi: Fix efiboot for payloads loaded from memory
* Print extra information from the bootmgr
* Move public cert for capsules to .rodata
* Set EFI capsule dfu_alt_info env explicitly
* Make FDT extra space configurable
* Install the ACPI table from the bloblist
* Handle GD_FLG_SKIP_RELOC
* Handle malloc() errors
Others:
* acpi: select CONFIG_BLOBLIST
* smbios: select CONFIG_BLOBLIST
* xilinx: dfu: Fill directly update_info.dfu_string
* cmd: fwu: Dump custom fields from mdata structure
* board: remove capsule update support in set_dfu_alt_info()
|
|
Pass a pointer to a memory mapped initrd and its size to
efi_binary_run. The EFI stack will register an EFI_LOAD_FILE2_PROTOCOL
for the next boot stage to access this initrd.
Signed-off-by: Adriano Cordova <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
Add support to install an initrd when running an EFI binary
with efi_binary_run
Signed-off-by: Adriano Cordova <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
|
|
This extends the bootm command to allow passing arguments to standalone
ELF applications.
Signed-off-by: Niu Zhihong <[email protected]>
|
|
The current LMB API's for allocating and reserving memory use a
per-caller based memory view. Memory allocated by a caller can then be
overwritten by another caller. Make these allocations and reservations
persistent using the alloced list data structure.
Two alloced lists are declared -- one for the available(free) memory,
and one for the used memory. Once full, the list can then be extended
at runtime.
[sjg: Use a stack to store pointer of lmb struct when running lmb tests]
Signed-off-by: Sughosh Ganu <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
[sjg: Optimise the logic to add a region in lmb_add_region_flags()]
|
|
Some operating systems (e.g. seL4) and embedded applications are ELF
images. It is convenient to use FIT-images to implement trusted boot.
Added "elf" image type for booting using bootm command.
Signed-off-by: Maxim Moskalets <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from all "boot/" files and when needed add
missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
Simon Glass <[email protected]> says:
This series continues refactoring the bootm code to allow it to be used
with CONFIG_COMMAND disabled. The OS-handling code is refactored and
a new bootm_run() function is created to run through the bootm stages.
This completes the work.
A booti_go() function is created also, in case it proves useful, but at
last for now standard boot does not use this.
This is cmdd (part d of CMDLINE refactoring)
It depends on dm/bootstda-working
which depends on dm/cmdc-working
|
|
Use struct bootm_info with this function, to avoiding needing to
create a new one.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Adjust boot_os_fn to use struct bootm_info instead of the separate
argc, argv and image parameters. Update the handlers accordingly. Few
of the functions make use of the arguments, so this improves code size
slightly.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Now that efi_loader subsystem provides interfaces that are equivalent
with bootefi command, we can replace command invocations with APIs.
Signed-off-by: AKASHI Takahiro <[email protected]>
|
|
The normal bootm flow calls bootm_find_other() can call the
BOOTM_STATE_FINDOTHER state as part of its processing. Fix the
condition there so that this hack can be removed.
Also drop the confusing check for the OS type, since do_bootm_tee() is
only called if the condition is met - see bootm_os_get_boot_func()
Signed-off-by: Simon Glass <[email protected]>
|
|
The normal bootm flow calls bootm_find_other() can call the
BOOTM_STATE_FINDOTHER state as part of its processing. Fix the
condition there so that this hack can be removed.
Signed-off-by: Simon Glass <[email protected]>
|
|
This works without issue, so don't fail.
Signed-off-by: Sean Anderson <[email protected]>
|
|
The last user of the NEEDS_MANUAL_RELOC has been removed in commit
26af162ac8f8 ("arch: m68k: Implement relocation")
Remove now unused NEEDS_MANUAL_RELOC code.
Signed-off-by: Marek Vasut <[email protected]>
|
|
This is not needed and we should avoid typedefs. Use the struct instead
and rename it to indicate that it really is a legacy struct.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is not needed and we should avoid typedefs. Use the struct instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
In a lot of cases kernel resets UART HW. To ensure that U-Boot messages
printed before booting the kernel are not lost, call new U-Boot console
flush() function.
Signed-off-by: Pali Rohár <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This has different semantics in different places. Go with the bootm method
and put it in a common function so that the behaviour is consistent in
U-Boot. Update the docs.
To be clear, this changes the way that 'bootelf' and standalone boot
work. Before, if autostart was set to "fred" or "YES", for example, they
would consider that a "yes". This may change behaviour for some boards,
but the only in-tree boards which mention autostart use "no" to disable
it, which will still work.
Signed-off-by: Simon Glass <[email protected]>
Suggested-by: Wolfgang Denk <[email protected]>
|
|
The last board that used to set CONFIG_LYNXKDI has been removed in
commit 242836a893ae ("powerpc: ppc4xx: remove pcs440ep support"),
doc/README.lynxkdi only talks about a MPC8260 board being supported,
and the mpc8260 support has been removed four years ago in commit
2eb48ff7a210d ("powerpc, 8260: remove support for mpc8260") already,
and common/lynxkdi.c only consists of an "#error" statement these
days, so it seems like the LYNX KDI code is dead code nowadays.
Let's remove it now.
Signed-off-by: Thomas Huth <[email protected]>
|
|
Quite a lot of the code in common/relates to booting and images. Before
adding more it seems like a good time to move the code into its own
directory.
Most files with 'boot' or 'image' in them are moved, except:
- autoboot.c which relates to U-Boot automatically running a script
- bootstage.c which relates to U-Boot timing
Drop the removal of boot* files from the output directory, since this
interfers with the symlinks created by tools and there does not appear
to be any such file from my brief testing.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Artem Lapkin <[email protected]>
Tested-by: Artem Lapkin <[email protected]>
|
